2DBOCscan
A 2DBOCscan scans through the RxDelay and RxThreshold at the same time, picking the best values for both ... or from the BOC. These could then be stored in a test result for later examination. Could also then ...
9K - last updated 2008-08-07 20:10 UTC by
3PG
ThreePointGainTest ...
1K - last updated 2005-08-02 11:50 UTC by
AlanBarrDone
===Really finished=== * RxDelay based on sendid ** [[ChrisLester]] has done this *Cut-down version of ... response curve? * Dcs information saving with test results. * Web interface to data ** Temporary ... multi-dsp running. ** See [[Release3.0TimingTests]] *OccupancyPerEvent histogramming ** works and ... tested ** would like to get into GUI - request to Dave ... for Forward community ** checked in but not tested * veto pipeline defects when fitting chips ** ...
1K - last updated 2005-01-28 15:49 UTC by
AlanBarrToDo
== Top Priorities == * Comparisons of data should be to reference set rather than to "ideal case" * Monitoring ... * Running scans with Tim sequences. * Boc Setup Tests ** Previous bug may have been fixed by DSP upgrades ... ** need to fix standard dump first * Accumulate test - talk to [[Peter]] * Display improvements ** ... the histogram readout ==Finished - to be tested== *Apply the results of a test (config-updater ... == * TimingInSCT - try with scintillator on H8 test box? * Set up config/histogramming faster - see ...
3K - last updated 2006-07-07 22:25 UTC by
AlansSr1Tests
Testing, mostly DSP code at SR1 at CERN =====Using the H8 Test Box===== * [[Testing-2005-11-02]] - mostly ... Peter's error task code, but without errors * [[Testing-2005-11-03]] - Peter's error task code, but ...
1K - last updated 2005-11-03 18:12 UTC by
AllBarrels
There are 4 SCT Barrels: [[Barrel3]] [[Barrel4]] [[Barrel5]] [[Barrel6]] For the mapping file click on ... are now at [[Sr1Setup]]. They were previously tested OxfordSetup [http://www-pnp.physics.ox.ac.uk/~demirkoz/forWiki/Final_list_JRC_Sept_2005.xls ...
1K - last updated 2007-10-04 08:51 UTC by
AnalysisService
It is the job of the <CDoc SctAnalysis::AnalysisService> to work out how a module has responded ... to a [[Test]], in particular: * creating a <CDoc SctData::TestResult> ... how a particular module has respoded during the test. * finding whether there are any problems, which ... <CDoc SctData::ModuleDefect> s. * if the test might lead to an updated configuration (e.g. modifying ... should be and add those to the <CDoc SctData::TestResult>. The AnalysisService has various callbacks. ...
2K - last updated 2004-03-04 17:17 UTC by
AnybodyToDo
== DAQUSER's WISHLIST == This is a list of things which if ANYBODY (who has time) did, would be very ... even SELECT=1... * Diagnose and fix TxCurrent test ** Need a hard reset (250ms delay between crates) ... Reasonable attempt at this is now in CVS, needs testing * Probe Scan ** Seems not to work when there ... config? ** Translation: There may be some scans/tests which don't depend on the results of previous ... we want to do which are similarish: # Config + test results -> new config # Diff configs ** I'm ...
4K - last updated 2008-08-20 14:19 UTC by
ApplicationParametersInvalid
When you get ApplicationParametersInvalid or Application Parameters Invalid or Applications Parameter ... "Binary" "DSctApiServer" "Binary" "SctTest" "Binary" "SctHighLevelTest" </rel> <rel ...
1K - last updated 2005-01-27 17:39 UTC by
ArchivingService
Saves data for long-term retrieval. Primarily written by AlessandroTricoli. Ideas for updates in [[SctRodDaqRelease3]]: ... * Respond to TestData and SequenceData objects this will enable ... * Save scans and tests as they become available rather than waiting ... til the Test has finished * [[Alan]] suggests - move to database ...
1K - last updated 2003-11-24 17:06 UTC by
BOC
The BOC (or Back Of Crate) module is part of the SctHardware. It is the primary data and control interface ... parameters are configured from the BocSetupTests Extracted from Maurice Goodrick's BOC web site: ...
1K - last updated 2005-08-10 11:19 UTC by
Barrel3Analysis
There are several people doing analysis of [[Barrel3]] on data taken during assembly, and during warm ... files of data to be made for any module and any test. *These ROOT files have also been generated and ... comparisons between SctRodDaq datasets for any test patameter === Notes and reports === '''Note that ... here] ** Alan and Chris to give some input ... Cold test document] * Alan's [http://www-pnp.physics.ox.ac.uk/~barra/WikiPlots/Post-mortem.doc ...
1K - last updated 2005-05-04 12:17 UTC by
Barrel3Exceptions
==The definitive list of known exceptions== * lmt01 Z+6 20220330200024 ** No redundant TTC (from harness ... test) * lmt03 Z-5 20220330200357 ** No redundant TTC ... (from harness test) * lmt03 Z+6 20220330200319 ** Noise slope in ... last 4 chips * lmt05 all ** Harnesses not tested at Oxford * lmt06 all ** Harnesses not tested ... 20220040200090 ** No redundant TTC (from harness test) * lmt08 Z+1 20220330200472 ** Channel 722 had ...
7K - last updated 2006-03-28 08:38 UTC by
Barrel3HardwareConfig
Part of [[OxfordSetup]] Specific to the tests of Barrel 3, the crates have been cabled up according to ... PS = Power Supply Dummy = Dummy load box for testing PS CB = Circuit Breaker Box, aka "Octopus" ...
3K - last updated 2005-03-10 14:09 UTC by
Barrel4
Testing at oxford started 4 July 2005. Part of AllBarrels. See [[Barrel4Exceptions]] and also [[Barrel4ColdTest]] ...
1K - last updated 2005-08-09 23:03 UTC by
Barrel4Analysis
=== Log books === * Electronic [http://www-pnp.physics.ox.ac.uk/~daquser/cgi-bin/sctroddaqsummary.cgi ... a short list of good cold runs, see [[Barrel4ColdTest]] === Tools etc === * The [http://www-pnp.physics.ox.ac.uk/~daquser/cgi-bin/sctroddaqsummary.cgi ... files of data to be made for any module and any test. * These ROOT files have also been generated and ... comparisons between SctRodDaq datasets for any test parameter === Notes === * SynchTriggerNoiseAnalysis, ...
1K - last updated 2005-08-10 13:10 UTC by
Barrel4ColdTest
<b>MoPS Exceptions</b> * LMT04 Z-2 VVCSEL 5.0V * LMT04 Z-3 VVCSEL 5.0V * LMT04 Z-4 VVCSEL ... effect of light leak, known from assembly test) * LMT23 Z-6 VVCSEL 4.3V * LMT28 Z+2 VVCSEL 3.0V ... unreliable in SELECT=0, known from assembly test) * LMT38 Z-6 SELECT = 1 (no pin current, known ... from assembly test) * LMT40 Z-6 SELECT = 1 (Reduces [slightly] noise ... in place * LMT10 Z+6 link1 DIED DURING COLD TEST - was later repaired * LMT29 Z+1 link0 modified ...
3K - last updated 2005-09-12 10:13 UTC by
Barrel4Exceptions
LMT2 Z+4 Link 0 DEAD VCSEL 1/2 normal current (failure of ileda?) * was later replaced by modifed module ... nasty time structure in E13 in DoubleTriggerNoiseTest, which does not look like events. Not fixed by ... LMT28 z-1 20220170200349 chip S1 fails the Nmask test - certain strip addresses are not formed correctly, ... This chip also causes data errors in the SD test: 8 channels had to masked off to cure this problem, ... the 2 channels highlighted by the NMask test. * Was later replaced by 20220170200752... LMT28 ...
3K - last updated 2009-08-11 12:58 UTC by
Barrel5Exceptions
Features on [[Barrel5]] ==Modules which were replaced== * LMT02 Z-4 20220380200044 has been replaced ... by 20220170200375 ** Chip S9 causes errors at SD test. Not cured by masking. * LMT37 Z-4 20220170200195 ... ** chip S11 causes errors at 3PG and NO tests. 3PG errors can be cured by masking 12 channels, ... RX threshold 80 ==Modules which, at the time of testing, had high IPIN== These were corrected by reducing ... the BOC used and may need to be revised during testing at CERN. * LMT45 Z+6 * LMT45 Z+4 * LMT45 Z+5 ...
2K - last updated 2006-03-31 15:42 UTC by
Barrel6
Part of AllBarrels and at OxfordSetup [[Barrel6Exceptions]] list is now being compiled. [[Barrel6ColdTest]] ...
1K - last updated 2005-05-27 00:52 UTC by
Barrel6Analysis
=== Log books === * Electronic [http://www-pnp.physics.ox.ac.uk/~daquser/cgi-bin/sctroddaqsummary.cgi ... files of data to be made for any module and any test. * These ROOT files have also been generated and ... comparisons between SctRodDaq datasets for any test patameter * For instructions on how to do analysis ... well as Environment data for the whole B6 cold test can be downloaded from [http://www-pnp.physics.ox.ac.uk/~daquser/dcs_analysis/B6/dcs_b6_analysis.html ... * DoubleTriggerAnalysis, ChipCounterTest and [[OPEAnalysis]] have now been updated with ...
4K - last updated 2005-08-12 15:42 UTC by
Barrel6ColdTest
A summary of [[Barrel6]] features applicable during the cold test... == B6 Z- ALONE == *NOT TESTED: ** ... All modules were tested! *ADJUSTMENTS: ** LMT01 Z-4 set TX Current 128 ... must be masked off to avoid data errors in 3PG test. (NB this fault also shows in full NMask test.) ... *Useful Run List: **tbc == B6 Z+ ALONE == *NOT TESTED: **LMT12 Z+5 - did not hold detector bias voltage. ... <i>Module was replaced after the cold test.</i> **LMT31 Z+2 - cabling or PS fault. ...
9K - last updated 2005-10-04 15:21 UTC by
Barrel6Exceptions
Features on [[Barrel6]] ==Executive Summary: Modules with Major Faults== These are the modules which, ... spread on chip S12. Known from reception testing. * lmt40 z-5 US137 has very high offset/gain ... spread on chip S11. Known from reception testing. The following modules have now been replaced: ... high noise! ==Known fibre breaks from harness testing:== The modules at the following locations have ... dead PINs== The following modules have been tested using Select=1 redundant TTC. * lmt17 z-5 UK519 ...
2K - last updated 2006-03-29 12:05 UTC by
BarrelConfig
Part of [[OxfordSetup]] Here we describe the format of pre-defined files that are used in SCT DAQ. These ... lower modules are put on the barrel first and tested. Only after they are confirmed to work properly, ... files to a number other than 1 from tests of the test-structures on the wafers. A module ...
1K - last updated 2005-07-14 11:25 UTC by
BilgeToDo
== In Progress== ?? == DONE == Thesis Debugging ROS issues during physics running Get TDC/ADC setup to ... work Writing ISSummaryWriter Working on [[CDItesting]] with [[Nuno]] Investigations of electrical ... In progress at TimingIn wrote ChipCounterTest and analysis finalized analysis of DoubleTriggerNoise. ... added new "observables" for DoubleTriggerNoise test: peakbin and peakratio. reanalysis of run2180.0 ...
1K - last updated 2007-05-13 19:44 UTC by
BlankMergePage
(See also MergingPagesForOmniMigration) First * Freeze SctRodDaq_3_0_BRANCH ** Chris sent mail 5th November ... || || || ||daq-1|| Chris || || || || || ||decodeTestStand|| || || || || || ||docs|| || || || || || ... || || ||SctService|| Chris || || || || || ||SCTTestAPI|| Chris || || || || || ||setup.csh|| Chris ... ||SummaryWriter|| Chris || || || || || ||SystemTests|| Chris || || || || || ||TestGUI|| Chris || || ...
1K - last updated 2005-02-16 19:02 UTC by
BocSetupTests
These tests are designed to setup the registers of the back-of-crate card ([[BOC]]). *RxDelayTest *RxThresholdBasedOnConfigRegisterTest ... *[[2DBOCscan]] *TxCurrentTest *MarkSpaceRatioTest *RawScan There seems to be ... a ProblemWithBocSetupTests (hopefully now fixed) that casted doubt on their ...
1K - last updated 2006-12-11 16:50 UTC by
BoostOptional
Describe the new page here. <pre> gdb $SCT_DAQ_ROOT/installed/i686-slc3-gcc323-dbg/bin/CalibrationController ... #5 0x0052063b in SctData::IO::TestResultStreamer_v4::read (this=0x9839cc0, in=@0xb6f7bb0, ... ResultStreamer_v4.cpp:77 #6 0x00318ec8 in Sct::IOManager::readImpl ... #8 0x0050b5db in SctData::IO::PipelineTestResultStreamer_v1::read ( this=0x983ad70, in=@0xb6f7bb0, ... lineTestResultStreamer_v1.cpp:28 #9 0x0050b4df in SctData::IO::PipelineTestResultStreamer_v1::read ...
3K - last updated 2005-12-06 13:49 UTC by
BruceGallopTodo
Most of this moved to SctApiToDo, what remains needs sorting. See also https://savannah.cern.ch/bugs/?group=atlassctroddaq, ... to CORAL scheme === Written XML based test programs. Read and write of CORAL mostly passes ... SystemTests, left out power mapping... Trying to use copy ... and Peter will discuss == Done recently (needs testing) == Preliminary IPC support for ScanMonitor ... triggers sent? * Other things known to need testing ** Full histograms ** Dual triggers == Other ...
3K - last updated 2007-04-17 16:05 UTC by
BugFixesForOmniMigration
===Require attention=== * [[Alan]]: There's a line in AnalysisService/src/StrobeDelayAlgorithm.cpp that ... module map etc. ** Message: <code> sctGui::TestSelection : Unrecognised testname: FullBypassBarrelTest ...
1K - last updated 2005-02-14 18:01 UTC by lapnat.physics.ox.ac.uk
BuildingARelease
Here are some instructions on building a new release of SctRodDaq: Before a release is built, please ... as necessary. # Ensure the release is properly tested first! # Ensure that all the correct images ... maybe) and appropriate test data is in the SctTestApiData directory. Here ... you would like the makefile to run the SystemTests or not. # Type: "make >& make.out&" ... !BinaryRelease.tar.gz. # Rename them, do some tests (see TestingARelease) and send them to the appropriate ...
1K - last updated 2005-01-26 14:32 UTC by
BuildingSctRodDaq
We are currently using the tip of TDAQ14_BRANCH The setup script depends on the account you are using: ... ( test /atlas/daq/ext/Nag_C && test -d /atlas/daq/ext/Nag_C ... cp `find /atlas/daq/ext/ -name SCTTEST_3_20_P.jar` /usera/sctrod/lester-SLC4/SctRodDaq/installed/share/lib ...
1K - last updated 2007-03-16 10:44 UTC by
CDI
Conditions Database Interface More information under [[CDItesting]] CDI is used to publish SCT [[IS]] ...
1K - last updated 2005-11-21 15:05 UTC by
CDItesting
On pcphsctr04.cern.ch: From SystemTests, run AnalysisTests/NOTests/VariableTriggersTest/ -> put things ... (eg. atlobk02.cern.ch:test_sct:conditions:conditions:3306"). Source the script. ... all objects matching the pattern "ControlData.TestData*"): Execute '' cdi_set_conditions -p SCT -n ... "ControlData.TestData*" '' NB:The order of the execution of these ... To look at the example storage of ControlData.TestData do: * Host: atlobk02.cern.ch * DB: test_sct_v2 ...
1K - last updated 2005-11-09 17:05 UTC by
CalibrationController
Overall high-level responsibility for running the stages in a calibration is given to the CalibrationController. ... PHYSICS -> Module ** Start Sequence *** Start Test **** cc requests API autoUpdateBanks(SCAN) **** ... output **** (further scans as required) *** End Test ***** (cc requests) CALIBRATION -> Api (gets ... PHYSICS -> Module ** Start Sequence *** Start Test **** Api->CALIBRATION **** Modify in Api **** ... (Api) ***** SCAN->Api(Api) *** End Test *** CALIBRATION->Api *** Update *** Start Test ...
1K - last updated 2005-08-07 16:28 UTC by
Cambridge
== 20051215 == Up until yesterday Cambridge was using ~sctrod/lester/TDAQ14_BRANCH/camSetup.sh for tdaq-01-04-01 ... and tagging all as SctRodDaq_4_3_RC1 prior to test builds. == 20051216 == Build completed in /atlas/daq/..... ... Found a few bugs while testing release (see [[TestingSctRodDaq_4_3_RC1]]) ...
1K - last updated 2005-12-16 14:29 UTC by
ChipConfiguration
This is the ABCD config register, each number is a field in the register as below (number on the right ... got right: readoutMode: (0-3) Hit, Level, Edge, Test (any 1, X1X, 01X, XXX) calibMode: (0-3) Which ...
1K - last updated 2008-03-03 13:27 UTC by
ChipCounterTest
Part of SctRodDaq The [[ASIC]], ABCD3T chip has 4 bits of Level1 counter and 8 bits of Bunch Crossing ... Counter. The idea of this test is to check that the bits in the header of data ... is considered a reason to take off a module. The test sends 64 consequtive triggers to the module and ... There are two defects associated with this test: L1_COUNTER and BC_COUNTER that will be reported ... in the ChipCounterTestResult. The bit that it failed on is also reported. ...
1K - last updated 2005-07-15 10:07 UTC by
CombinedRunning
This page replaces the old [[Sr1Setup]] page, which is largely obsolete. BuildingSctRodDaq is some tips ... belong to the same FilarReadout Module To run a test program, over Slink channel 2 (say): on ROS, filar_slink_dst ... -o 2 -p on BOC, SlinkTest -s11 </pre> == Timing Scans == From beanshell: ...
1K - last updated 2006-06-21 14:38 UTC by
Configuration
== CORAL/COOL == OK, current next generation is CORAL/COOL, the main advantage being that the same database ... in the menu do: * display -> ** Test Results Then right click on the module and select ... choice between the configuration stored with the test result and the current configuration as returned ...
2K - last updated 2006-08-22 09:30 UTC by
ControlData
ControlData is an IS object with 3 classes with the following dump from rbd: <pre> ppslgen.physics.ox.ac.uk% ... attribute number : 10 description : "" CLASS : "TestData" is abstract : "No" object number : 0 relationship ... [[ISattributes]]. An example is given here in [[TestData]]. ...
1K - last updated 2005-11-01 23:04 UTC by
CoolAccess
I am exploring the COOL api in SCT/[http://isscvs.cern.ch/cgi-bin/cvsweb.cgi/detectors/SCT/SCT/COOL_Test/?cvsroot=atlastdaq ... COOL_Test]. My code is checked out here: file:///usera/sctrod/lester/TDAQ20/SctRodDaq/SCT/COOL_Test ... which establishes a connection to the COOL database ... COOLTEST resident in the file mysqlfile.db (which must ...
4K - last updated 2009-04-27 15:33 UTC by pcfk.hep.phy.cam.ac.uk
DTN
DoubleTriggerNoise test ...
1K - last updated 2005-08-02 11:51 UTC by
DaqMeetingJune2005
For agreed actions see [[DaqMeetingJune2005ActionList]] ===Many-module "test" system(s)=== *Short-term: ... to do? * Multi-crate (still todo?) suitable for test with B5@CERN? * Off-rod redundancy status * Off-crate ... redundancy * SctRodDaq Test programs for DSP programmers * Extra information ... for tests (options like "Synch") * Dual Triggers status ... * Testing of existing DSP code with many modules (c and ...
1K - last updated 2005-06-30 08:48 UTC by
DaqMeetingJune2005ActionList
==Available test systems== ====Short-term test systems==== * [[Barrel5]] - the afternoon and evening ... were spent testing the DAQ code on 24 modules on B5 (R4-updated). ... There is unlikely to be very much time for DAQ testing on B5 at SR1. * There may also be an opportunity ... to test the DAQ on [[Barrel4]] at Oxford if the mounting ... and testing goes quickly. ====BarrelSector==== The BarrelSector ...
3K - last updated 2005-09-14 20:11 UTC by
DataDisplayer
The DataDisplayer is a complied program, linking to the SctRodDaq shared libraries which presents the ... results of tests. The output format can be chosen from: * interactive ... $ is_ls -p SCT -n FittedData $ is_ls -p SCT -n TestData </pre> to list data, with -n specifiying ...
1K - last updated 2005-01-14 18:17 UTC by
DataDisplayerExamples
Examples of how to use the DataDisplayer <pre> $ DataDisplayer --help </pre> to see the options. ... -chip 0 5 scratch/SctData::NoiseOccupancyTestResult.1317.1.20220170100029 </pre> displays ... link (chips 0 to 5) of data for NoiseOccupancyTest in scratch space <pre> $ DataDisplayer -occ ...
1K - last updated 2005-01-29 00:42 UTC by
DebuggingNewIO
How to debug IS <pre> export TDAQ_PARTITION=SCT_IO_TEST ipc_server & ipc_server -p $TDAQ_PARTITION ... & is_server -p $TDAQ_PARTITION -n TEST & StressFilePublisher -n 1 -r 10 -m IOManagerIS:TEST ... export SCT_DATA_SEARCH_PATH=IOManagerIS:TEST DataDisplayer SctData::RawScanResult.666.0.012345678901234 ... SCT_DATA_SEARCH_PATH=IOManagerIS: DataDisplayer TEST.SctData::RawScanResult.666.0.012345678901234 </pre> ...
1K - last updated 2008-08-20 14:29 UTC by
DocumentationForOmniMigration
The following documentation bears some relation to the OmniMigration programme: * AcronymSoup * SctDaqHowto ... /atlasdata/nfsroot73/home/barra/new-online/CorbaTests/ ! * Configuration Database stuff (xml files) ...
1K - last updated 2008-05-29 09:42 UTC by
DoubleTriggerAnalysis
This page documents the preliminary analysis of DoubleTriggerNoise data from Barrel 3, 4 and 6 cold runs ... the DoubleTriggerNoise variables. For barrel 3 tests at Oxford, the ratio of max to pedestal and the ... Occupancy Peak occurs The DoubleTriggerNoise test was repeated for Barrel 3 reception testing at ... pickup? Noise slope shows up in Noise Occupancy test from run 5852. Maybe we should try running this ... one should also note that historically, this test is when we realised that this module had lost ...
3K - last updated 2007-04-12 20:41 UTC by
DoubleTriggerNoise
The purpose of the DoubleTriggerNoise test is to identify problematic electrical and optical pickup during ... bunch-crossings after the event was taken. The test is done in the following sequence: 1) sending ...
1K - last updated 2005-05-26 14:03 UTC by
DoubleTriggerNoiseTest
DoubleTriggerNoise test. Also known as [[DTN]]. ...
1K - last updated 2005-08-02 11:51 UTC by
DspPrimitivesReview
Based on primParams.h Haven't looked at primParams_sct.h properly, maybe Alan would comment on the current ... doesn't use == * ECHO * WRITE_BUFFER * MEMORY_TEST * SET_LED * FLASH_LED but these look useful enough ... to keep around. Of course MEMORY_TEST could be changed, as long as it does the same ...
1K - last updated 2006-01-31 11:20 UTC by
EndcapC Combined run
== General == Please keep an eye on the module HVs, LVs and temperatures during the run. On SctGUI - ... ... ... ... ...
1K - last updated 2006-12-08 17:07 UTC by
ErrorEventDecoder
This page describes the output of the Error Event Decoder which has now been incorporated into the DSP ... at CERN you will be able to open the latest log file by: <pre> ~/scripts/vitail (to ... all the lines related to error events from the latest CrateServer log file and stream them to the console. ...
1K - last updated 2009-09-11 17:23 UTC by
ExampleConfigurationFile
There are a few example configurations in the distribution: * sctConf/exampleRod.xml ** This also provides ... used by the ConfigurationService * config/rods/testRod.xml Currently the most flexible configuration ...
1K - last updated 2005-11-18 23:14 UTC by
FullBypassTest
The module is programmed to each possible configuration of routing token and data between the chips. ...
1K - last updated 2006-01-07 10:23 UTC by
FunctionalOverview
Tests are written up in [http://hepwww.rl.ac.uk/atlas-sct/documents/pro/Electrical_Tests_338.pdf Peter's ... Alan's IEEE proceedings] The tests are broken into three categories: ---- Those ... ([[BOC]]) opto-electronics. See BocSetupTests ---- Those that test & calibrate the digital ... part of the front-end [[ASIC]]s * NMaskTest * PipelineTest * FullBypassTest ---- Those that ... test & calibrate the analogue part of the front-end ...
1K - last updated 2005-09-14 17:14 UTC by
GenerateConfiguration.pl
This script generates ConfigurationService xml configuration files by using the ModuleDataFile and XmlSummaryFile ... number of the data. This facilitates stress testing. ...
1K - last updated 2004-01-17 17:57 UTC by
H8TestBoxSetup
Instructions on turning on H8TestBox. TO SWITCH ON * Turn on the chiller * Turn on Crate 8 (Breakers ...
1K - last updated 2006-02-22 09:34 UTC by
HangingCalibrationController
== Mail of Wed, 1 Mar 2006 18:52:00 == <pre> Some Good News ! With some helpful suggestions from ... would hang on shutdown if you had run any scans/tests, but not otherwise, and not always 100% repeatably. ... for the CORBA IPCServants for ScanRequest, TestRequest and SequenceRequest. Unfortunately there ... -> heap storage of the servant) in each test script and each sequence script etc. So far I ... done this for RxThresholdBasedOnConfigRegisterTest, (not yet in CVS) but it should be trivial to ...
8K - last updated 2006-03-01 19:04 UTC by
HardwareProblems
You shouldnt need this if you follow instructions for SettingUpDaqHardware There are numerous things ... turns up in ScanVme then try TouchRod and EchoTest from RodUtils. If the ROD runs EchoTest -l10000 ...
1K - last updated 2005-03-24 01:19 UTC by
Hardware reference
This page will hopefully expand to contain pointers to Hardware documents. ==ROD== The latest version ...
1K - last updated 2008-02-06 21:07 UTC by
HistogrammingProblemsInPhysicsMode
While trying to run the ( version 1.1.2.5 of ) physicsModeTimingScan.java in TDAQ14_BRANCH under SctApiIPC/scripts, ... and /work/srsctdaq1/sr1daq/saved_data/TestData.2526.0.PhysicsModeTimingScan.gz This test ... was done with 4 modules from the H8Testbox -- they have higher occupancy from the barrel ... The bytestream for this run is at /data/sct/daq_SCTEB__0002526_file01.writing ... There are no errors at the tail of this bytestream. ...
1K - last updated 2006-05-05 14:35 UTC by
HowTo
HowToAddANewTest [[HowToInstallSctRodDaq]] ...
1K - last updated 2007-06-26 10:18 UTC by
HowToAddANewAnalysis
To start with I'll work out what to do to change a current analysis algortihm. The algorithm itself is ... or changing a variable), you need to change the TestResult, which is defined in SCTData/src/${NAME}TestResult.cpp. ... The TestResult contains the analysis results of the test, ... which is defined in SCTData/src/IO/${NAME}TestResultStreamer_vn.cpp, where n is the version of ... script in the same directory. After updating the TestResult and streamer, the next stage is to write ...
2K - last updated 2008-06-09 08:52 UTC by
HowToAddANewTest
Simple: First, the test 'scripts' are in: CalibrationController/src/scripts The most important distinction ... raw and 'cooked' scans, after that most new tests are small variations on previous ones. Find a ... passed to registerStaticFactoryMethodForTest in the cpp file ** This is the name displayed ... in the list of all tests in the GUI. # The name parameter passed to startTestRealImpl ... are used by Fitting and Analysis, for a new test use NONE See also HowToAddANewAnalysis. ...
1K - last updated 2007-08-01 10:46 UTC by
HowToRunASystemTest
To run the system tests from a release file: # Set <code>SCTDAQ_ROD_CONFIGURATION_PATH</code> ... to <code>$SCT_DAQ_ROOT/config/TestConfig/DefaultRod.xml</code>. This is now ... the default if you don't set it. # get SctTestApiData from <code>/atlas/daq/code/SctTestApiData</code> ... to $SCT_DAQ_ROOT/config/databases/SCT_test.data.xml. This is the default if you don't set ... all work) and see data generated. If you want to test the system further, you should: # Create appropriate ...
1K - last updated 2004-01-17 18:10 UTC by
ISPublishProblems
SctApi/SctApiRaw.cxx publishes things using code like: const boost::shared_ptr<Trigger> trigger ... void CalibrationControllerImpl::updateStatus() { Sct::BugReport("BUG01","CCImpl.cpp","In ... updateStatus 1/4"); string name = SctNames::getControlDataName(); ... Sct::BugReport("BUG01","CCImpl.cpp","In updateStatus 2/4"); name += ".Status"; Sct::BugReport("BUG01","CCImpl.cpp","In ... updateStatus 3/4"); ISUtilities::addOrUpdateOrMessage(name, ...
2K - last updated 2005-01-13 14:30 UTC by
ISSctData
ISSctData package contains [[IS]] versions of all the TestResults that are defined in the SctData package. ... GUI to read all the relavent information about TestResults. At this point, we will stop using the ... been taken so they do not share any common code. TESTED 23/02/2006 * ChipCounter * NMask * MarkSpaceRatio ...
1K - last updated 2006-02-27 11:36 UTC by
ISattributes
STATUS: With [[CDI]], we can put the TestData objects into the Lisbon database. (For those of you who ... does not have any attributes. If you browse a TestData object using the instruction on [[CDItesting]], ... in [[IS]] need an [[OKS]] schema file. The TestData object is defined in SctRodDaq/CalibrationController/data/ControlData.schema.xml ... <pre> rdb_dump -p SCT -d ISRepository -c TestData --attributes </pre> SIMPLE TEST: In ... a system test, start the rdb_server *explicitly* after starting ...
1K - last updated 2005-11-09 17:07 UTC by
InterMap
AbbeNormal http://ourpla.net/cgi/pikie? AcadWiki http://xarch.tu-graz.ac.at/autocad/wiki/ Acronym http://www.acronymfinder.com/af-query.asp?String=exact&Acronym= ... MbTest http://www.usemod.com/cgi-bin/mbtest.pl? MeatBall ... http://ch.twi.tudelft.nl/~mostert/striki/teststriki.pl? Tavi http://tavi.sourceforge.net/index.php? ...
1K - last updated 2003-11-21 14:30 UTC by
IssuesDuringOmniMigration
Problems and queries arrising during the migration to online-00-21-02 from online-00-19-01. ---- See ... <code>SCT/OmniMarshalling.h</code> untested ** Unit test in progress. ** [[Chris]] <B>beware!</B> ... untested ** Once all the tests in SystemTests/ConfigurationTests ... they compile, but their effectiveness remains untested. ** Update: at run time, pmg_sync routines need ... they are "now up" I am not sure). Anyway, many test routines (eg "make run" in SystemTests) cause ...
9K - last updated 2004-12-09 16:39 UTC by
JanuaryTestingWeek
==Aim== To find out any remaining problems with SctRodDaq which could compromise our ability to do stand-alone ... empty triggers <i>(done AJB)</i> ==Tests with H8 Testbox (7 modules)== ===Calibration ... *efb and router firmware to be updated to latest versions *Test sequence to be performed for each ... to make sure no dependence on group 0? BJG) *Test sequence to comprise: **NMaskTest **PipeLineTest ... **FullBypassTest ***<i> This test fails about 30% of the ...
6K - last updated 2006-03-31 11:28 UTC by
Ktidbexplorer
http://sim.fc.ul.pt/sim_en/KTIDBExplorer Example [http://sim.fc.ul.pt/sim_en/Tidb2 TIDB2] strings of ... are: cool://oracle@INTR:SCTTEST:atlas_onasiccool:noasic2006 cool://oracle@devdb10:SR1_TEST:atlas_sct_commcond_dev:treppenwolf9 ... http://www.hep.phy.cam.ac.uk/~atlasdaq/images/SCTTEST_DatabaseConnection.png ...
1K - last updated 2008-08-04 10:07 UTC by pcphsctr06.cern.ch
LinkMaskMonitoring
(1) Check out latest versions of SctRodDaq/CoolTools, and SctRodDaq/SctApi (2) Recompile (3) In the OKS ... see if the directory contains a file called "LMM_Test.db". If it does, this is superb! Send me the file! ... issuing a command like: $SCT_DAQ_ROOT/SCT/COOL_Test/allRead sqlite_file:LMM_Test.db/DUMMYDB /purple/pants ... hopefully will become $SCT_DAQ_ROOT/SCT/COOL_Test/allRead sqlite_file:LMM_Test.db/DUMMYDB /SCT/DAQ/Conditions ...
1K - last updated 2009-04-27 16:24 UTC by pcfk.hep.phy.cam.ac.uk
MarkSpaceRatioTest
One of the BocSetupTests. The idea behind this test is to set up the TX duty cycle (Mark:Space ratio) ...
1K - last updated 2005-03-22 22:09 UTC by
Matrix
Matrix is part of the cooling and laser interlock systems. Its purpose is to send "enable" signal to ... to edit, i.e. for Barrel6 C://SCT_DCS/Imatrix/test_matrix_B6/master_zminus.vhd * Change stave numbers ... examples in this file: C://SCT_DCS/Imatrix/test_matrix_work/test_matrix_work_Zminus.vhd * Compile ... and compile the project also using the file: test_matrix_work_Zplus.vhd (or master_zplus.vhd for ...
1K - last updated 2005-03-30 09:40 UTC by
MattPalmer
Currently a third year and is primarily responsible (with Alan and Dave) for these areas: * FittingService ... * SctPackage * DataModel * GuiComponents * TestGui * SctService If you need support, then you ...
1K - last updated 2004-01-15 10:42 UTC by
Meeting12October2005
===SCT DAQ Job List Following ID Week=== ====12th October 2005==== For SCT and Combined SCT/TRT running ... 2005 onwards <B>Aim: to have a suitable, tested, DAQ ready as the baseline to use by 18th November</B> ... 1. Complete tests of DAQ migrated to SLC3 and tdaq-01-02-00, with ... TDAQ1/SLC3 talk page 17 – Chris ** Complete tests of run-time test modifications – [[Alan]] ** ... Test synchronous double triggers with modules – [[Alan]], ...
3K - last updated 2005-11-09 15:48 UTC by
Meeting30October2007
== DAQ Meeting in ID Control Room at 10am on 30th October == <pre> Phone conference: Phone: +41 ... in particular preparations for calibration tests of the full SCT over the coming weeks. == Agenda ...
1K - last updated 2007-10-30 08:59 UTC by
Merge-C0-C3
(See also MergingPagesForOmniMigration) == Begin with merge of ONLINE21_BRANCH == First * Small team ... || builds || || || ||config|| Chris || done || untested || || || ||daq-1|| Alan || done 6/8/04 || builds ... || || || ||decodeTestStand|| Chris || done || || || || ||docs|| Alan ... || ||MiniUtils || Alan || done || build + unit test || || || ||README || Alan || done 6/8/04 || no ... || || ||sctddc-00-00-02|| Chris || Builds || untested || || || ||sctGUI|| Chris || done || untested ...
1K - last updated 2004-11-06 17:35 UTC by
Merge-C4-C5
(See also MergingPagesForOmniMigration) First * Freeze SctRodDaq_3_0_BRANCH ** Chris sent mail 13th August ... || Chris ||Done15 || || Needs new trigger test files? || || ||ArchivingService|| Chris || Done ... Chris || Done 2|| No changes || || || ||decodeTestStand|| || || || || || ||docs|| || || || || || ... || Done 13 || No changes || Needs new trigger test files? What about FullBypass new files? || || ... Chris || Done 12 || No changes || || || ||SCTTestAPI|| Chris || Done 11 || No changes || || || ||setup.csh|| ...
1K - last updated 2004-11-06 19:26 UTC by
Merge-C6-C7
(See also MergingPagesForOmniMigration) First * Freeze SctRodDaq_3_0_BRANCH ** Chris sent mail 5th November ... ||daq-1|| Chris || No changes|| || || || ||decodeTestStand|| Chris || No changes || || || || ||docs|| ... Chris || No changes || || || || ||SCTTestAPI|| Chris || No changes || || || || ||setup.csh|| ... Chris || done 10 || || || || ||SystemTests|| Chris || done 15 || || || || ||TestGUI|| Chris ...
1K - last updated 2004-11-10 11:31 UTC by
Merge-C8-C9
(See also MergingPagesForOmniMigration) First * Freeze SctRodDaq_3_0_BRANCH ** Haz been frozen since ... ||daq-1|| Chris || done || || || None || ||decodeTestStand|| Chris || done || || || Trivial changes ... Chris || done || || || Small bugfix to UnitTest Makefile which is presumably desired. || ||SctDataDisplay|| ... Chris || done || || || None || ||SCTTestAPI|| Chris || done || || || None || ||SummaryWriter|| ... Chris || done || || || None || ||SystemTests|| Chris || done || || || None || ||TestGUI|| ...
2K - last updated 2005-11-02 10:37 UTC by
MergingPagesForOmniMigration
(See also OmniMigration) Summary Picture: http://www.hep.phy.cam.ac.uk/~atlasdaq/images/MergePic.multicrate.png ... and MERGE_POINT_C11 at which a lot of testing was done and the software was found to be incapable ...
1K - last updated 2005-03-09 16:49 UTC by
MissingLinks
This page aims to give the definitive overview of known faults with the optolinks for all barrels. For ... setting could be found during the cold test. * LMT24 Z-6 20220330200131 link1 dead - standard ... VCSEL bias line identified during pit connection tests * LMT22 Z+6 20220040200322 link0 dead (pit) * ... VCSEL bias line identified during pit connection tests TTC links * lmt01 Z+6 20220330200024 No redundant ... TTC (from harness test) * lmt03 Z-5 20220330200357 No redundant TTC (from ...
3K - last updated 2009-08-11 13:18 UTC by
MissingLinksAtOxford
This page aims to give the definitive overview of known faults with the optolinks for all barrels at ... setting could be found during the cold test. * LMT29 Z-3 20220380200111 link1 dead - standard ... 20220330200024 No redundant TTC (from harness test) * lmt03 Z-5 20220330200357 No redundant TTC (from ... harness test) * lmt07 Z+6 20220040200090 No redundant TTC (from ... harness test) * lmt11 Z+6 20220330200353 No redundant TTC (from ...
2K - last updated 2007-03-18 18:07 UTC by
ModuleConfig
Part of [[BarrelConfig]] The module configuration files are downloaded by the command getDBfiles, which ... be edited by hand for debugging purposes, during testing and ignore the rest. <pre> Element Attribute ...
4K - last updated 2008-09-16 10:23 UTC by pcatsct06.cern.ch
ModuleDataFile
This file lists the location of SCTDAQ root data for various tests and module serial numbers. The format ... is: <serial number> <test name> <full data path> <run number> ... <start scan number> Where <test name> is one of: * NO * !FullBypassTest * !PipelineTest ... Here is an example: 20220330200015 FullBypassTest /d05/silicon/sctdaq/data/pcef 582 1 20220330200015 ... PipelineTest /d05/silicon/sctdaq/data/pcef 582 8 20220330200015 ...
1K - last updated 2004-01-17 18:02 UTC by
ModuleDiagnostics
No response # Is the module power on? # Is Icc above 100mA? If not, no module is connected. # Is Idd ... RxDelay and RxCurrent (perhaps by doing BocSetupTests), until a good signal is received. [Note that ... in release 3 doing these tests suggests values but a restart is needed afterwards, ... before doing digital or analogue tests.] Also the SctApiGUI has an auto-configure function ... to the triggers sent during the RX threshold test. What might possibly be wrong? A. It could be ...
1K - last updated 2006-02-10 16:29 UTC by
MooTest
boing dsdf fffff ...
1K - last updated 2006-03-31 11:57 UTC by pcfk.hep.phy.cam.ac.uk
MooTest2
Describe the new page here. blah sdfsdf ...
1K - last updated 2006-03-31 11:07 UTC by
NMask
NMaskTest ...
1K - last updated 2005-08-02 11:53 UTC by
NMaskTest
This test validates that the DAQ can read out various-length signals from the modules. It incriments ...
1K - last updated 2006-01-07 10:22 UTC by
NPtGainProblems
[[Bilge]] reported 2nd Dec 2004 22:48:55 <pre> Hello Alan. Fitting failed on the Noise Occ test ... ...
1K - last updated 2005-01-26 17:04 UTC by
NewFeatures
New features of SctRodDaq. Mostly, in need of testing. * Check MiniUtils for new commands that have been ... added there. ** Latest new commend in MiniUtils is [[runInPmgEnvFromIS]] ...
1K - last updated 2007-06-01 15:33 UTC by
NewMarkSpaceRatioTest
http://www.hep.phy.cam.ac.uk/~atlasdaq/images/Raw.71512.53.20220040200304_1.eps http://www.hep.phy.cam.ac.uk/~atlasdaq/images/Raw.71512.53.20220040200304_1.jpg ...
1K - last updated 2008-06-05 10:39 UTC by
NewSystemTestsNotes
The SystemTests are used to test the functionality of the various services. They've been getting out ... as IS servers had to be treated differently. == Test scripts == The current system works using Makefiles ... as well as the top-level scripts in SystemTests/scripts. It should be possible to run all the ... tests within the same instance of setup_daq. It may ... be possible to all tests without cycling down from initial between a test. ...
1K - last updated 2006-09-20 13:08 UTC by
NoiseOccupancyTest
The purpose of this test is to measure the noise occupancy at different thresholds. A plot of log(noise ... important to turn the HV on before running the test, otherwise it will take a very long time to run ... the other hand the noise from the ThreePointGainTest is much more robust against such problems, and ...
1K - last updated 2004-11-15 12:23 UTC by
Nuno
Also known as Nuno Barros Spends time working on [[CDItesting]] [http://nfiuza.home.cern.ch/nfiuza/ Homepage] ...
1K - last updated 2005-11-09 16:38 UTC by
OPEAnalysis
Part of [[Barrel3Analysis]] OPEAnalysis analyses data from the [[OccupancyPerEvent]] Data using [[OPETool]]. ... ... run is the most complete run for NoiseOccupancyTest since it has complete data from range -40 to +20mV ... ... cases, cross-checking with the Oxford Reception test data and cold test data from module production ...
5K - last updated 2005-08-11 12:20 UTC by
OccupancyPerEvent
Helpful in trying to get a handle on common-mode noise pickup. The [[ROD]] [[DSP]]s can record the number ... which analyses the OPE data for [[NoiseOccupancyTest]] and outputs a "badness" parameter to the online ...
1K - last updated 2005-05-26 16:58 UTC by
OmniORB
OmniORB is a [[CORBA]] implementation created by Omni. The [http://omniorb.sourceforge.net/ OmniORB homepage]. ... \ $SCT_DAQ_ROOT/SCT/CORBA_Test/example1/Rabbit.idl \ $SCT_DAQ_ROOT/SCT/CORBA_Test/example2/Rabbit.idl ... \ $SCT_DAQ_ROOT/SCT/UnitTest/marshalling.idl \ $SCT_DAQ_ROOT/SCT/src/Addressing.idl ... \ $SCT_DAQ_ROOT/SCTTestAPI/SctTestApi.idl \ $SCT_DAQ_ROOT/SctApiIPC/SctApi.idl ... \ $SCT_DAQ_ROOT/SctService/test/ObserverInterface.idl \ $SCT_DAQ_ROOT/sctConfIPC/configuration.idl ...
2K - last updated 2008-08-08 14:03 UTC by pcphsctr06.cern.ch
OnasicRecipes
[https://twiki.cern.ch/twiki/bin/view/Atlas/AtlasTDAQDataBaseONASIC Onasic documentation] == ! IMPORTANT ... Notes == 1. First I am using the INTR DB for testing, so first you should check ( [[Ktidbexplorer]] ... folder: oks2cool2 -c "cool://oracle@INTR:SCTTEST:atlas_onasiccool:onasic2006" -a drop -f SCTTEST2/RunParams ... new folder: oks2cool2 -c "cool://oracle@INTR:SCTTEST:atlas_onasiccool:onasic2006" -a create -f MOO ... -p $TDAQ_PARTITION -s RunParams#.* -v 6 -f SCTTEST onasic_set_conditions -p $TDAQ_PARTITION -t 0 ...
5K - last updated 2008-08-05 14:02 UTC by pcatsct06.cern.ch
OnlineHistogramming
== What is it? == This page refers to histograms built in the ROD, using event data captured using triggers ... in each of two bins. [ Also see PreTriggerNoiseTest ] .X onlineHistoAsync.java starts a scan using ... by providing information in a TestData object. [ This needs extending to actually ... be allowed to change in physics mode? ] ] .X testAsyncScan.java is an early version of onlineHistoAsync. ...
1K - last updated 2006-04-10 17:16 UTC by
OnlineSoftwareVersion
Below describes moving from 00-19-01 to 00-20-00. See TdaqOneSixNotes for moving to 01-06-00. Conversation ... be a big change for us, but will be the combined test-beam release (14:16:18) ajb57: Bruce are you using ... Fixing in what way? (14:19:51) Matt: For SctTest and PMG synchronisation stuff (14:22:26) bjg1492: ...
1K - last updated 2006-09-07 09:19 UTC by wwwcache2.rl.ac.uk
Overview
This Wiki is mostly out of date, see the SCT TWiki pages for more up to date info. Still most important ... is stored here: == News == * [[NewFeatures]] * [[TestingSchedule]] * [[AnybodyToDo]] * [[H8TestBoxSetup]] ...
2K - last updated 2009-01-14 14:12 UTC by
OxfordSetup
For information about the 4 barrels, see AllBarrels For [[Barrel3]] testing, we used SctRodDaq version ... 3. For [[Barrel6]] and [[Barrel5]] testing, we are using SctRodDaq version 4. During assembly ...
1K - last updated 2005-05-06 17:14 UTC by
PhaseMeasurement
This page documents how to make the phase measurement of the cosmic trigger with respect to the 40Mhz ... You have to be on the SBC to run the test program. So on lnxpool17, in the directory: /daqsoft/sct/TimingInfo/detectors/Tile/TileVMEboards/i686-slc3-gcc323-opt ... The ADC replies when you do: ./v792_test 0x00200000 1 And the TDC replies when you do: ... ./v775_test 0x00100000 1 The dip switch on the corbo is set ... but it replies to 0x600000 from vmescan! ./corbo_test 0x600000 1 30000 15 vmeconfig -a ~sr1daq/temp.cfg ...
5K - last updated 2006-10-17 12:53 UTC by
PhoneMeeting
== Agenda == Current state of [[SctRodDaqRelease2.1]] * progress with [[Doug]] and [[Bruce]] * documentation ... and ArchivingService competing at end of [[Test]]. [[Alessandro]] trying some fixes to save raws ... attemted by [[Matt]] * Problem with FullBypassTest ** seems to be a [[DSP]] issue. * on the [[DCS]] ... in [[SctRodDaqRelease2.1]]. ** Driven by need to test the NoiseOccupancy on a module with optial readout ...
1K - last updated 2003-11-28 15:03 UTC by
PhoneMeeting2
16/3/2004 Issues: == How to proceed when a module dosen't behave well (e.g. LV trip) == note : Requires ... for downstream analysis: === # Modifies IS TestData to include list of bad modules, to be added ... scenarios? ## Does this need to be done on a per-test basis? Current status probably insufficient. # ... memebers expectRawResult, expectFitResult, expectTestResult (and archiveMe?) to TestData in IS (and ... to TestRequest). * What to do if dont expect result, but ...
2K - last updated 2004-03-16 14:47 UTC by ppnt164.physics.ox.ac.uk
PipelineTest
This is a test of the pipeline of the cells of the ABCD3T in order to identify cells which may permanently ...
1K - last updated 2005-03-04 18:07 UTC by
PreparationsForFullBarrel
* MultiCrateRunning using RodCrateDaq ** Perhaps ChrisLester can take this over? * BinaryOverVme ** did ... this get done at testbeam? *** Only S-link events done at testbeam ** ...
1K - last updated 2005-02-15 09:59 UTC by
ProblemWithBocSetupTests
Running doRawScan exclusively: http://www.hep.phy.cam.ac.uk/~atlasdaq/images/Raw.1209.0.20220170100053_1.gif ...
1K - last updated 2005-01-21 18:21 UTC by
ProblemWithInitialPowerOn
Note: Possible bug? Failure to initialise crate or vme on first occasion since power on ... This note ... is an extension of that in [[TestingSctRodDaq_4_1]] It seems there may be a bug ...
3K - last updated 2005-02-21 17:07 UTC by
ProblemsSeenInCurrentCode
6/10/2005 <pre> MDSP 1.20 Aug 11 2005 15:09:56 SDSP 1.20 Jul 26 2005 18:34:30 </pre> Testing ... not enter clock/2 mode as they ought to for this test - return event, unless we do a hard reset immediately ... without OPE looks very good and robust Not tested: * SynchTrigs attempted but errors. 1 module ...
1K - last updated 2005-10-07 09:27 UTC by
ProblemsWithTextBuffers
List of problems with text buffers == Transfer buffer full == This occurs when the VME crate boots and ... a bottleneck for full-crate operation (seen when testing is cosmics run) -- this wasn't the case at ...
1K - last updated 2006-06-30 08:44 UTC by
ROD
The Read-Out Device is responsible for decoding the data from the modules and off-loading event data ... can be debugged at a low level using the RodTest software. Link to more rod-related information: ...
1K - last updated 2008-04-18 14:31 UTC by
RawScan
This sends triggers to the modules and records (in a histogram) the actual raw bitstream coming from ... See also BocSetupTests ...
1K - last updated 2004-07-19 15:40 UTC by
ReAnalyser
<pre> Usage: ReAnalyse -t <test> -m <module1> <module2> -r <run> -s <scan1> ... <scan2> [-v] [-n] ... -t <test_name> name of test to analyse (one only) -m ... ...] list of scans for current run number -p <testpoint1> [<testpoint2> ... ] list of values ... of test points -n dont actually do the analysis, just ... Use with caution - if you already have a TestResult for your test, then you could over-write ...
1K - last updated 2007-12-14 11:58 UTC by
Release3.0TimingTests
Done at Oxford by [[Alan]], using ~daquser/Release3_branch on 28/7/2004. ----- Both modules in group ... Run 1320, scans 0->2, repeated 3->5 * NMaskTest: <B>25s</B> * StrobeDelayTest (1000 ... <B>3 min 11s</B> * NoiseOccupancyTest: <B>2 min 44s</B> ---- 2 Modules, ... </pre> * NMaskTest: <B>13s</B> * StrobeDelayTest (500 ... <B>1 min 3s</B> * NoiseOccupancyTest: <B>Approx 4 mins (aborted near end)</B> ...
1K - last updated 2004-07-28 12:59 UTC by
Releases
The current release of SctRodDaq is probably a version just off the top of the list below. *[[SctRodDaqRelease4.3]] ... but patched so as to make the SynchTriggerNoise test and associated analysis work. It was produced ...
1K - last updated 2008-04-14 13:59 UTC by
RodTest
Used for debugging the [[ROD]] at a low level. Runs on the [[SBC]]. === Download === In the sctpixel ... there is a package: Applications/Common/RodTest. CVSROOT = /afs/cern.ch/user/s/sctpixel/private/cvsroot ... === Description === From README FILE: RODtest is a linux GUI-oriented application created to ... found in http://mgerman.home.cern.ch/mgerman/rodtest/rodtest-api/html/index.html ...
1K - last updated 2003-12-01 17:56 UTC by
RunNumber
Since tdaq-01-07 we are required to use some kind of fancy spangled run-number server. See RunNumberOwnServer ... standalone run number server. Within point 1 (tested as sctswinstaller@pc-sct-mon-05) the following ...
4K - last updated 2007-04-02 15:34 UTC by
RunNumberOwnServer
This page says how to run your own stand alone run-number server. See also the general RunNumber information ... and the run-number service (only for SCT testing purposes) without an internet connection to ... CORAL, i.e. Oracle, MySQL or SQLite. Honestly I tested Oracle only, so I cannot guaranty everything ... variables, e.g.: TNS_ADMIN for Oracle 4) Test how the rn package works, e.g. run rn_ls utility: ... d) TDAQ_RUN_NUMBER_CONNECT variable = "sct-test:X:oracle://name-of-my-oracle-server/RN" This is ...
2K - last updated 2007-04-02 15:35 UTC by
RxDelay
Phase of [[BOC]] pin sampling relative to 25 ns clock. See RxDelayTest. ...
1K - last updated 2004-07-22 20:35 UTC by
RxDelayTest
The RxDelayTest scans (strobes) and sets the delay of the [[BOC]] opto receiver sample relative to the ... An example of one of the BocSetupTests ...
1K - last updated 2005-03-22 22:12 UTC by
RxThreshold
RxThresholdTest ...
1K - last updated 2005-08-02 11:54 UTC by
RxThresholdBasedOnConfigRegisterTest
==The method of this test is as follows:== * Configure modules to return the content of the ConfigurationRegister. ... way between the lower and upper bounds. ==This test outputs:== * The minimum threshold at which the ... successful RxThresholdBasedOnConfigRegisterTest http://www.hep.phy.cam.ac.uk/~atlasdaq/images/Raw.1912.1.20220380200139_1.jpg ... STYLE successful RxThresholdBasedOnConfigRegisterTest http://www.hep.phy.cam.ac.uk/~atlasdaq/images/RxThresholdBasedOnConfigRegisterExample.png ... last packet, but this hasn't explicitely been tested. Should be OK, though, I think. [[Chris]] ...
1K - last updated 2006-07-05 15:35 UTC by
RxThresholdTest
This test is now deprecated replaced by the RxThresholdBasedOnConfigRegisterTest The RxThresholdTest ... See also RxDelayTest, BocSetupTests ...
1K - last updated 2004-12-14 19:39 UTC by
SCTDAQ
SCTDAQ is the MuSTARD DAQ system, see <a href="http://atlas.web.cern.ch/Atlas/GROUPS/INNER_DETECTOR/SCT/testdaq/testdaq.html">here</a>. ... It provides the structure for the tests, it also integrates DCS (using SCTLV and SCTHV). ...
1K - last updated 2003-12-08 16:50 UTC by ppnt141.physics.ox.ac.uk
SandBox
This is an area for playing! Feel free to change anything here. ---- Testing CDoc/JDoc links: <CDoc ... list # A # B ## B.A ###B.A.A == A title! == test ----- ===== InTheBox Testing cache stuff More ... Testing And more And more Yet more ===== test add some ...
1K - last updated 2006-02-06 13:50 UTC by
SctApi
SctApi is the API used to communicate directly with the SCT modules. The [[TApi]] is used for low level ... for primitive lists. * Multiple RODs (untested) * Refactor for unit testing * Crate becomes ... (Rev E) integration * Multiple RODs (coding and testing) * TIM (for synchronous triggers) ** TIM trigger ...
1K - last updated 2004-07-26 12:43 UTC by
SctApiSplit
== Methods at Crate level only == Mostly debug or access to low-level features not used in normal Calibration ... unsigned long crate, in unsigned long rod); void testLinkOutSelect(in unsigned long partition, in unsigned ... long rod, in unsigned long link); unsigned long testLinkOutRetrieve(in unsigned long partition, in ...
11K - last updated 2005-02-25 12:53 UTC by
SctApiTestData
Ooops, should be SctTestApiData ...
1K - last updated 2004-01-17 18:12 UTC by
SctApiTests
Things to test at least before a release. Not all these things work yet, but it should be known what ... doesn't. * All Characterization sequence tests, particularly Full Bypass Test. * 16 bit and ...
1K - last updated 2004-07-15 17:15 UTC by
SctApiToDo
See SctApiTests for things that should be checked every time. Add Slave single write to RODDiagnostics. ... * Needs redundancy loop across two RODs to test! == Lower Priority == BOC settings management ... different sets of modules ** New DSP code needs testing ** "Minor" fix for SctApi (Use both "serial ... * Useful for switching all scans to 32 bit * Tests may store scan between invocations so doesn't ... as separate method? * Mostly done Usability test of sctConfGUI (Anyone): * See ConfGuiUsability ...
3K - last updated 2007-04-17 16:33 UTC by
SctConfigurationCORAL
SCT configuration based on database access by CORAL and COOL. See also: https://twiki.cern.ch/twiki/bin/view/Atlas/SCTCoralConfigurationThoughts ... the data in a DB. === coolFill and coolRead === Test programs ...
1K - last updated 2009-03-27 11:29 UTC by wwwcache2.rl.ac.uk
SctDaqHowto
* make sure you have all the necessary software and a working mySetup.csh. * If you start a new shell, ... the EventData is_server. These are useful for testing purposes. For example : [localhost]$ : [localhost]$ ... TestSubmit : Created hists : Created scan : Created ... ::: EventData.SctData::RawScanResult.1000.100.TestSubmit <1/7/04 14:13:00> <SctData::RawScanResult> ... of these three items is the data inserted by TestSubmit. The other two items were inserted by the ...
2K - last updated 2004-12-10 14:24 UTC by ppatlas3.physics.ox.ac.uk
SctDatabases
note that there is now a mailing list for related material: <code> atlas-project-sct-database@cern.ch ... </code> [[xml2COOL]] [[CDItesting]] ConfigurationService describes how the DAQ ...
1K - last updated 2006-05-03 09:39 UTC by
SctGui
SctGui is the primary user interface for SctRodDaq. It provides a graphical representation of the physical ... for any barrel or endcap * invoking of test scans * display showing status of tests and scans ... in progress * display of results of analysed tests * comparison of test results with SCTDB data ... == Latest Updates == 04/08/06 * Extracts analysis results ... for which only Summary objects are available) * Test names are no longer hardcoded. Instead, SctGUI ...
2K - last updated 2006-08-30 10:08 UTC by
SctRodDaq
SctRodDaq is the configuration, calibration, readout and analysis package for the ATLAS SCT. Please see ... * DataModel (SctData) * GuiComponents * TestGui There are also some testing systems: * SoftwareTests ... * SctTest See SystemPerformance for information on how to ... for the developers: * BuildingARelease * TestingARelease ...
1K - last updated 2006-02-12 13:47 UTC by
SctRodDaqPaper
List of exisiting resources & links == Official papers == * The Data Acquisition and Calibration ... * Beam tests of ATLAS SCT silicon strip detector modules ** ...
2K - last updated 2008-07-28 09:07 UTC by
SctRodDaqRelease2
SctRodDaq was released as version 2.00 on Tuesday 18 November. This was the first public release. A minor ... variable. The examples included are: * SCT_test.data.xml: This runs the test machine all on the ... huge numbers of defects and problems for many tests. * Problem with SctApi communicating with [[DSP]] ... need to have a hard reset after the pipeline test [ What's the symptom here? I thought this was ... sure... [[Matt]] * The full bypass test has some issues (we're working on this) * Due ...
1K - last updated 2003-12-09 17:54 UTC by
SctRodDaqRelease2.1
SctRodDaq Release 2.1 has one primary new feature over [[SctRodDaqRelease2]]: it includes the new DSP ... scans (and therefore response curves, trim range tests etc) work fine now. Many of the more simple bugs ...
2K - last updated 2004-02-16 18:58 UTC by pplxgen.physics.ox.ac.uk
SctRodDaqRelease3
Release 3 is now available as [[SctRodDaqRelease3.01]] from [[Download]]. See also [[SctRodDaqRelease3.0]]. ... and display of DCS conditions * Full testing system ** Correctness testing: The analyses ... have been tested and compared with SCTDAQ automatically. This ... and scalability: The full-system has been tested with 384 (virtual) modules. All components are ... components are "clean" ** SctApi: A low-level testing system has allowed much of the logic of the ...
1K - last updated 2005-01-11 14:02 UTC by
SctRodDaqRelease3.0
The first public release of [[SctRodDaqRelease3]]. == Known issues with version 3.0 == * See [[SctRodDaqRelease3]] ... one doesn't get reset (BC). * Noise occupancy test was sending a 0 fC cal pulse which may have been ...
1K - last updated 2004-07-29 11:18 UTC by
SctRodDaqRelease3.2
You are strongly encouraged to upgrade to preferrably the latest (or at the least a post September 2004) ...
1K - last updated 2005-01-15 00:03 UTC by
SctRodDaqRelease3RC
First pre-release of [[SctRodDaqRelease3]]. Outstanding issues: * Has someone checked the SummaryPlots ... from SctDaq? ** This is the point of the SystemTest package. There are automated tests there that ... check against the Cambridge reception tests (currently about 130 modules of data). *** I'm ... *** sn, run number, scan number, time, test type... * Configuration propagation between runs ... Done, int[] now interpreted as hex * Full bypass test ...
1K - last updated 2004-04-07 12:48 UTC by ugps02.ph.bham.ac.uk
SctRodDaqRelease4
This release is the second major release for MacroAssembly and the [[SRBuilding]]. Lessons learned from ... * Review of status logic - e.g. status of Scan, Test, Sequence. On a per-module basis? **'''still required ... SctApi. (This is probably essential for RCD and TestBeam) **'''CalibrationController is now a RunController''' ... through different arguments to services not tested''' * Alternative to NFS - needs discussion with ... of IS is apparently imminent''' ==New Scan / Test List== **''' none of these added yet''' * AccumulateTest ...
1K - last updated 2005-02-14 12:09 UTC by
SctRodDaqRelease4.1
See [[SctRodDaqRelease4]] for issues related to release 4 in general. SctRodDaqRelease4.1.1 fixes bug ... since power on. See note at the foot of [[TestingSctRodDaq_4_1]]. Just noticed while running ... for doing so == BUGS == === DoubleTriggerNoiseTest === seems to be histogramming the first rather ... change <pre> // Capture the second of ... values (i.e. are checked) after the following tests which require them to be disabled: ** after DoubleTrigger ...
1K - last updated 2005-05-09 17:03 UTC by
SctRodDaqRelease4.1.1
Bug fix release for [[SctRodDaqRelease4.1]]. [[SctRodDaqRelease4.1.1]] fixes a bug in [[SctRodDaqRelease4.1]] ... sctGui to display meaningless numbers in NPtGain tests results. This bug was caused by the newly added ... occupancy slopes, which were confusing sctGui's test-result summary parser. For other information relating ...
1K - last updated 2005-02-14 17:50 UTC by
SctRodDaqRelease4.2
It is expected that this release may not successfully run SynchTriggerNoise test with a Tim of revision ... Frequency Trigger Vetor (FFTV). This release was tested with a 3B Tim. ...
1K - last updated 2005-09-16 17:35 UTC by
SctRodDaqRelease4.3
== RELEASE CANDIDATE 1 == * Release notes ** [[SctRodDaqRelease4.3.RC1]] * Testing notes ** [[TestingSctRodDaq_4_3_RC1]] ... * Release notes ** [[SctRodDaqRelease4.3.RC2]] * Testing notes ** [[TestingSctRodDaq_4_3_RC2]] == RELEASE ... * Release notes ** [[SctRodDaqRelease4.3.RC3]] * Testing notes ** [[TestingSctRodDaq_4_3_RC3]] ...
1K - last updated 2005-12-23 09:24 UTC by
SctRodDaqRelease4.3.RC1
See also [[SctRodDaqRelease4.3]]. == HOW CREATED == [[SctRodDaqRelease4.3.RC1]] was created on 15th Dec ... SctRodDaq_0104, _0104_P and _TDAQ14 using our latest version of the DSP code, nmask scans work with ... Most of this work was performed using the latest firmware loaded to slot 10: we were able to backtrack ... gives the same result for three grups (last test). I don't suppse there may have been a little ... groups.... Cheers, P. </pre> * SystemTests ** config/databases/SCT_test.data.xml has not ...
3K - last updated 2005-12-19 11:21 UTC by
SctRodDaqRelease4.3.RC3
See also [[SctRodDaqRelease4.3]] and [[SctRodDaqRelease4.3.RC2]]. == HOW CREATED == [[SctRodDaqRelease4.3.RC3]] ... nor DBTranfer.cpp in Archiving/src/db/test were updated relative to their [[SctRodDaqRelease4.3.RC2]] ... (DoubleTriggerNoise and SynchTriggerNoise ?) tests with zero occupancy in some chips. ----- See ...
1K - last updated 2005-12-23 09:36 UTC by
SctRodDaqReleaseCandidatesFor3.2
Oxford had many local modifications to their code as a result of barrel 3 assembly. Before integration ... lester-20050112e-cambridgeAfterOxfordB3Updates. Testing was done at Cambridge on 3 modules. Some scans ... as SctRodDaq_3_2_RC1. Am trying to create a test release on the based on SctRodDaq_3_2_RC1 based ... Am now testing the binary release -- am keeping a log of tweaks ... make it run on [[SctRodDaqReleaseCandidatesFor3.2Testing]]. ...
1K - last updated 2005-01-17 10:49 UTC by
SctRodDaqReleaseCandidatesFor3.2Testing
I tested 3.2.RC1 in pcei.hep.phy.cam.ac.uk:/usera/sctrod/testing_3_2_RC1 <a href="http://www.hep.phy.cam.ac.uk/atlas/macro-assembly/DAQ/release3.2.RC1/BinaryRelease_SctRodDaq_3_2_RC1.tar.gz">This ... and thus we will need SCT_DAQ_ROOT=/usera/sctrod/testing_3_2_RC1/SctRodDaq For the testing of 3.2.RC1 ... ... of ... camSetup.sh</a> ...
2K - last updated 2005-02-10 18:02 UTC by
SctTest
This page descibes the SctTest package which is the primary way of testing the system. It is split into ... quite how it all works.... ===High-level Testing=== The executable !SctHighLevelTest runs the ... high-level testing system. This is a direct replacement for the ... data files are used dynamically. ===Low-level Testing=== The executable !SctTest runs the low-level ... testing system. It is a drop-in replacement for SctApi ...
2K - last updated 2004-01-17 17:47 UTC by
SctTestApiData
This directory, $SCT_DAQ_ROOT/installed/share/!SctTestApiData is included with the releases and includes ... modules. This is useful for running with the SctTest test systems ...
1K - last updated 2004-01-17 18:12 UTC by
SctWeekTechnicalMeetingDec2003
I am proposing a technical meeting amongst the developers to discuss in detail what needs to be done ... of used/unused. Matt will propogate through * Testing (stress): We will work to merging dummy SctApi ... and SctTestApi. This is potentially a lot of (hard) work. ... Some more on SystemTests * Robustness: Very important! If we implement ... investigate how much time it will take to put TestResult object back into IS. Dave will change the ...
1K - last updated 2003-12-08 17:29 UTC by
SettingUpDaqHardware
Instructions from JohnHill... There have been several occasions over the last couple of years where during ... starting with "TouchRod" and followed by "EchoTest", if you want to have some confidence in the ROD. ...
1K - last updated 2005-03-24 01:22 UTC by
SlopesOnBarrelThree
The NPtGainTest produces noise, offset and gain channel by channel. Looking for systematic slopes across ...
3K - last updated 2005-02-12 23:43 UTC by
SoftwareDiagnostics
Some information is available from the OnlineSoftware tools: To see what processes are running: <pre> ... example <pre> is_ls -p SCT is_ls -p SCT -n TestData </pre> To get the status of a particular ...
1K - last updated 2004-07-23 20:48 UTC by
SoftwareTests
This is a list of the test systems and so on used to test the software. ===SystemTests=== SystemTests ... programs that use the SctRodDaq software and tests to automatically run system-wide tests. They ... These could be thought of as acceptance tests, though they are not always implemented in a ... simple pass/fail way. ===SctTest=== SctTest consists of 2 systems for testing the ... software. *The low-level test system is a sub-class of SctApi that pretends ...
2K - last updated 2004-07-02 16:11 UTC by
SortingOutDspCode
Mail from PeterPhillips 2005-10-07 <pre> Hi Trevor, Alan, Last time I looked at rod-sct-1-20, I ... The code ain't there, I wouldn't bother to test it. You'll get an error that says not supported, ...
1K - last updated 2005-10-07 20:35 UTC by
SortingOutRodDaq
I'm trying to put together a consistent set of RodDaq software to develop both the [[DSP]] and SctApi ... (now SR1) code: <pre> M RodUtils/BocTest.cxx M RodUtils/FlashLoad.cxx M RodUtils/Makefile ...
3K - last updated 2005-10-07 19:46 UTC by
SortingOutRodDaqRodUtils
Part of SortingOutRodDaq Differences between SctRodDaq_3_0_BRANCH and oxford dev4 (now SR1) local copy ... cvs diff: Diffing RodUtils Index: RodUtils/BocTest.cxx ===== RCS file: /afs/cern.ch/user/s/sctpixel/private/cvsroot/RodDaq/RodUtils/BocTest.cxx,v ... retrieving revision 1.2.2.2 diff -r1.2.2.2 BocTest.cxx 9c9 < #include "../../VmeInterface/RCCVmeInterface.h" ...
2K - last updated 2005-10-06 19:36 UTC by
Sr1Setup
==Overview== There are currently two main test systems in SR1: * H8 test box setup. Host machine srsctdaq1, ... SBC ctatsct01 and LTP lnxpool17 * Sector test setup. Host machine pcphsctr05, SBC lnxpool10. ... disks at * /work/srsctdaq1 ** Used for the H8 testbox system running on host srsctdaq1 * /work/pcphsctr03 ... used Example - To start daq with the H8 test box on srsctdaq1: cd /daqsoft/sct * source setup_RC43.sh ... in slots 10/11 is used for H8 box calibration tests. Eg, for DSP code testing: <pre> cd /daqsoft/sct ...
4K - last updated 2006-03-22 16:09 UTC by
StatusOfOmniMigration
See also OmniMigration for related topics. The following table should (approximately) represent the current ... || Primary updater || Build status || Primary tester || Testing status || Comments || || AnalysisService ... || ChrisLester || builds || - || - || TESTING STILL TO BE DONE! || || config || - || builds ... ok || merge from 00-20 complete. || || decodeTestStand || - || fails || - || - || - || || docs || ... would have been needed for all the other SctApi/tests as well, just AutoConfig got compiled first... ...
2K - last updated 2004-07-13 13:02 UTC by
StrobeDelay
StrobeDelayTest ...
1K - last updated 2005-08-02 11:48 UTC by
StrobeDelayTest
Scans the delay of the injected calibration charge relative to the trigger, to find the peak of the front ...
1K - last updated 2006-01-07 10:23 UTC by
SummaryExtractor
<pre> Usage: SummaryExtractor [-file <filename>] <Names> Print the TestSummary information ... about a test Options: -file <filename> write to named ...
1K - last updated 2004-09-14 23:12 UTC by
SynchTriggerNoise
In the SynchTriggerNoise test, a trigger is sent at the same time to modules. An analysis for this data ... from the Router to the SDSP: most events in this test have no hits, but a complete frame is still transferred ... sent and is set to 0. In the OPE for this test, the y-axis "Null Variable" represent, readout ... :) </pre> and daves tag sr1_working_0405 Test program run with dev4 at oxford: http://www-pnp.physics.ox.ac.uk/~daquser/STN/ ... the distSlave option is commented out. This ...
3K - last updated 2005-09-15 22:21 UTC by
SynchTriggerNoiseAnalysis
Analysis of the SynchTriggerNoise == Analysis of SynchTriggerNoise data from Alan Phillips: == The Following ... Notes from Barrel 4 SynchTriggerNoise tests] == Re-analysis (online) of SynchTriggerNoise ...
2K - last updated 2005-10-11 15:16 UTC by
SynchTriggerNoiseDebugging
==Alan's findings as of 12/7/05== One's TIM needs to be set up as described in http://www.hep.ucl.ac.uk/atlas/sct/tim/. ... 2B s/n 212. === Debugging of SynchTrigerNoise test === Problems identified: # The events contain ... * [ Which configuration created errors? ] * Tested both scanning, and one or other scanning. * ... till part way through bin 3 * It's possible we tested the wrong thing, should try ** groups 0, 1, ... * AJB to do for single modules * needs to be tested ===firmware etc=== <pre> Started TIM status ...
2K - last updated 2005-07-12 16:36 UTC by
SystemPerformance
This page describes how to get the most out of SctRodDaq.... ==General Setup== Typically, all processes ... 0.3-0.4s/module * Analysis is very fast for all tests except the response curve which takes about 0.5-0.6s/module ... (as multiple scans are composed into a test there), but it should be the case that it doesn't ... data already cached in RAM first. * If analogue tests are slow, then try switching to the analytic ... advantage of ensuring that the FitScanResult and TestResult data are saved by the end of a Test (approximately!) ...
2K - last updated 2005-01-04 11:10 UTC by
SystemTests
This is a list of comments/notes from my testing of SctRodDaq using the SystemTests stuff. * Using the ... ResponseCurve tests, once, the FittingService hung after having done ... ** I have come across this problem again whilst testing the Trim Test. After 1316 scans the FittingService ... to insert a delay of 0.1 secs between publishing test data in the FullBypass test. It seems there is ... run. == Notes == See also ReAnalyser. A system tests is started by typing "make run" in a directory ...
4K - last updated 2007-12-14 15:52 UTC by
TApi
A ROOT library providing access to the SctApi. This is by far the easiest way to do low level debugging. ... These can be "decoded" by running: SctApi/tests/PrimList file/name/to/PrimList.bin Providing ...
1K - last updated 2004-07-28 15:09 UTC by
TApiMacros
There are lots of TApi macros: init.cxx and destroy.cxx are to be used as rootlogon and rootlogoff. Functs.cxx ... Noise scan * <b>nonLinear</b>: Test variable trigger counts * <b>pipeline</b>: ... Pipeline test * <b>response</b>: Response curve ... TIM triggers * <b>synchTrigsTest</b>: Manually set up TIM triggers * <b>threshold</b>: ... duplicate some of the RodUtils programs: LedTest.cxx DspDump.cxx Echo2Test.cxx echo.cxx EchoTest.cxx ...
1K - last updated 2004-07-28 15:29 UTC by
TdaqOneSixNotes
Issues that have cropped up moving to tdaq-01-06-00. == Getting things to compile == The main thing we've ... Dave had to do to run tdaq-01-06 with combined-test database files == At /daqsoft/combined * install ...
2K - last updated 2006-10-05 09:25 UTC by
Test
Various different tests are be applied to sct modules during assembly, macro-construction and at CERN. ... These include basic quality assurance tests, checks of the [[ASIC]] digital and analogue ... sections, and calibration steps. The tests are based on those from [[SCTDAQ]] - see [http://hepwww.rl.ac.uk/atlas-sct/documents/pro/Electrical_Tests_338.pdf ... Peter's writeup] The purpose of the test is two-fold # Evaluate the performance of the ... improve calibration or performance. Examples of test are found on the FunctionalOverview page. The ...
2K - last updated 2008-05-26 12:45 UTC by
TestBench software
This page is for discussing matters pertaining to the Windows-based TestStand software. ...
1K - last updated 2004-02-12 12:41 UTC by
TestData
TestData is a class defined as part of ControlData and has the following [[ISattributes]] <pre> ... rdb_dump -p SCT -d ISRepository -c TestData -attributes Print description of class "TestData": ... CLASS : "TestData" is abstract : "No" object number : 0 relationship ... : 14 description : "" ATTRIBUTES are: name : "testName" type : "string" range : "" is multi value ... is direct : "Yes" description : "Name of this test." ----- name : "runNumber" type : "u32" range ...
2K - last updated 2005-11-01 23:05 UTC by
TestResult
...
1K - last updated 2006-03-31 10:05 UTC by
TestSctDaq
* make sure you have all the necessary software and a working mySetup.csh. * If you start a new shell, ...
2K - last updated 2004-06-30 17:35 UTC by
Testing-2005-11-02
Part of [[AlansSr1Tests]] <pre> (16:11:22) Alan: Ok what do you want me to test? (16:11:54) PeterP: ... PeterP: Maybe try 1 for now, or run all tests with present code? (16:13:47) Alan: Sorry for ... take over just before lunch again. </pre> Testing run 1058, /daqsoft/sct/SctRodDaq_0104, /daqsoft/sct/oks/srsctdaq1/SctPartition.data.xml ...
2K - last updated 2005-11-03 15:08 UTC by
Testing-2005-11-03
Part of [[AlansSr1Tests]] ==To Test== Peters error code was tested yesterday without errors - all ok. ...
4K - last updated 2005-11-03 18:11 UTC by
TestingARelease
Maybe this is out of date, maybe not... See NewSystemTestsNotes To test a release at Cambridge: This ... tests the algorithms against the module reception test ... data. # Change to the installed/config/TestConfig directory # run createLookUpTables.cam.pl ... NMODULES to the number of modules you want to test (or a very large number for all of them) # type ... are any problems not understood or in the IOTests directory! Known problems: * The trim range test ...
1K - last updated 2006-09-20 12:55 UTC by
TestingSchedule
Notes on things that need testing, and results thereof. == Endcap cosmics == * Possibly try Coral backend ...
2K - last updated 2006-11-03 15:07 UTC by
TestingSctRodDaq 4 1
I tested SctRodDaq_4_1 in pcei.hep.phy.cam.ac.uk:/usera/sctrod/testing_4_1 This <a href="http://www.hep.phy.cam.ac.uk/atlas/macro-assembly/DAQ/SctRodDaq_4_1/BinaryRelease.tar.gz">BinaryRelease</a> ... and thus we will need SCT_DAQ_ROOT=/usera/sctrod/testing_4_1/SctRodDaq For the testing of SctRodDaq_4_1 ... ... of ... camSetup.sh</a> ...
5K - last updated 2005-02-21 16:38 UTC by
TestingSctRodDaq 4 2 RC1
I tested SctRodDaq_4_2_RC1 in pcei.hep.phy.cam.ac.uk:/usera/sctrod/testing_4_2_RC1 The binary release ... and thus we will need SCT_DAQ_ROOT=/usera/sctrod/testing_4_2_RC1/SctRodDaq For the testing of SctRodDaq_4_2_RC1 ... ... of ... camSetup.sh</a> ...
6K - last updated 2007-04-23 09:22 UTC by
TestingSctRodDaq 4 3 RC1
See also [[SctRodDaqRelease4.3]] and [[TestingSctRodDaq_4_3_RC2]]. ----- I tested SctRodDaq_4_3_RC1 in ... pcei.hep.phy.cam.ac.uk:/usera/sctrod/testing_4_3_RC1 Note to self: DON'T SOURCE ANY SCRIPTS ... and thus we will need SCT_DAQ_ROOT=/usera/sctrod/testing_4_3_RC1/SctRodDaq. For the testing of SctRodDaq_4_3_RC1 ... ... of ...
7K - last updated 2007-04-23 09:22 UTC by
TestingSctRodDaq 4 3 RC2
See also [[SctRodDaqRelease4.3]] and [[TestingSctRodDaq_4_3_RC1]]. == TESTING == Installed source release ... </pre> Built without errors :-) Start testing: <pre> Use 7 modules as defined in H8Testbox.xml. ... modules (13 links) returning events. Run through tests: NMask ok PipeLine ok StrobeDelay ok 3PtGain ... 'Scan aborted (histo stalled)' mrs at end of test and data looks rubbish (no threshold scan data ... ok in module probe. A general complaint - the test result says 'pass' for DoubleTriggerNoise and ...
1K - last updated 2005-12-19 14:03 UTC by
TestingSctRodDaq 4 3 RC3
== January 10th 2006 == Testing RC4_3ish at CERN. Differences to "official RC3": * new dsp code designed ... problems experienced with Double Trigger Noise Test on January 6th. * Revised SctGui Problem 1) Run ... controller. Restarting SctGui corrects this. H8 testbox, Modules per group 7/0/0/0 * 1501-0 NMask OK ... * 1501-1 Pipeline OK * 1501-3 FullBypassTest OK * 1501-4 Strobe Delay OK * 1501-5 3PG (poor ... all modules PASS but have 1536 bad strips! H8 testbox, Modules per group 2/2/2/1 Return to [[SctRodDaqRelease4.3]]. ...
1K - last updated 2006-01-10 15:10 UTC by wwwcache2.rl.ac.uk
TestsForBarrelSix
==Barrel 6 Routine Assembly Tests== General - 16 bit histograms would speed up r/o time for most of these. ... (Exceptions: NoiseOccupancyTest and DoubleTriggerNoise test, best done with higher ... * NMask ** 32 ->128, step 32 - '''(in cvs untested - [[Alan]])''' * StrobeDelayTest ** unchanged ... * ThreePointGainTest ** including slope analysis, otherwise unchanged ... * NoiseOccupancyTest ** including [[OPE]] analysis, otherwise unchanged ...
3K - last updated 2005-02-23 14:26 UTC by
ThreePointGainTest
Threshold scan is performed for injected charges of 0.5, 1.0 and 1.5fC. In each ase, a complementary ...
1K - last updated 2005-08-02 11:50 UTC by
TimingInSCT
This page is closely related to TimingIn == TimingScan GUI == The TrimingScan gui allows you to scan ... mode (the scan is performed by the SctApi and a TestData object is published similar to Alans TimingScan ...
1K - last updated 2006-05-05 13:26 UTC by
TomBarber
Thinking about ParallelBuildIdeas I have put together a small test of the parallel build structure and ... into an executable. I have added a copy of this test to the SctRodDaq CVS under the following directory: ... <pre> /SCT/ParallelBuild_Test/README </pre> Any comments on how it works ...
1K - last updated 2007-06-11 09:54 UTC by
Topical Discussions
Topical Discussion pages: * [[DraftConfigurationQuestionnaireAnswers]] * [[PreparationsForFullBarrel]] ... * [[TestsForBarrelSix]] * [[Barrel3Analysis]] * [[VME Hardware ... * [[DSP software]] * [[RodModule software]] * [[TestBench software]] * OmniMigration ...
1K - last updated 2006-06-06 09:08 UTC by
TrimDac
One-per-channel digitial-to-analogue converters, which allow fine-tuning of the threshold across a particular ... TrimDac s can be optimised using the TrimRange test. ...
1K - last updated 2003-11-25 10:13 UTC by
TxCurrentTest
This changes the opto transmitter current. You probably dont want to do this unless you've really zapped ... with 5 years worth of irradiation. See BocSetupTests for more approprate examples! Here is a mystery ...
1K - last updated 2006-06-15 16:58 UTC by
UsefulPrograms
Useful programs which dynamically link to the SctRodDaq libraries include: * DataDisplayer for viewing ... data * SummaryExtractor for getting a TestResult summary * ReAnalyser for re-analysis of ...
2K - last updated 2005-02-16 22:36 UTC by
XmlSummaryFile
This file consists of pairs of serial numbers and module xml configuration file locations, for example: ... [[GenerateConfiguration.pl]] and the high-level testing system to locate important information about ... XmlSummaryFile suitable for using with the !SctTestApiData that is shipped with the releases. ...
1K - last updated 2004-01-17 17:55 UTC by
createLookUpTables.cam.pl
Used for SystemTests This script automatically generates the ModuleDataFile and XmlSummaryFile needed ... for running the test system in Cambridge. In Cambridge there is lots ... of SCTDAQ data from module reception tests. As these are all stored in a logical location, ...
1K - last updated 2004-01-23 10:55 UTC by
getDBfiles
From DaveRobinson 's e-mail: The full list of options for 'java ProdDatabase/getDBfiles' is listed at ... by: * Compulsory parameters: ** -n to retrieve test results for test index n (see list below) OR ** ... to retrieve RC data files from 3ptgain tests ** one (or two) 14 digit serial numbers to retrieve ... to write data files to outputDirectory ** '-t testlocation' to download only data taken at testlocation ... given ScanNumber (if RunNumber also requested) *Test Index vs test type: ** 0 - Reset ** 1 - Redundancy ...
1K - last updated 2005-03-31 10:51 UTC by
onRODhist
This page describes how to run on-ROD histograms in physics mode. From Bruce: <pre> First run tapi. ... Set up the scan: 1) Have a look through testAsyncScan.cxx and see if it looks OK. The only ... = tapi.startAsyncScan(noise); 2) Load it .L testAsyncScan.cxx 3) TScanMonitor *monitor = testAsyncScan(); ...
1K - last updated 2005-12-06 13:50 UTC by
runInPmgEnvFromIS
This is a MiniUtils (TM) utility for running a program (if necessary in gdb or valgrind) in the environment ... 'SCT_SCRATCH_DIR': '/alldisks/pc-sct-mon-09/tmp', ... backend: 'IPC' registered Making a note of a TestRequest called [WarpMarkSpaceRatioTest] at line ... Making a note of a TestRequest ... Making a note of a TestRequest ...
1K - last updated 2007-06-01 15:38 UTC by
tdaq-01-04-00
Installation instructions for tdaq-01-04-00 * Go to http://atddoc.cern.ch/cmt/releases/ and following ... possible to run RxThresholdBasedOnConfigRegister test in Cambridge on the same date as the tag -- see ...
1K - last updated 2005-10-21 08:33 UTC by
xml2COOL
part of [[SctDatabases]] http://cool.cvs.cern.ch/cgi-bin/cool.cgi/cool/contrib/XmlCool/ [http://lcgapp.cern.ch/project/CondDB/snapshot/gettingStartedCOOL.html ... using 'scram b' and then use the command: unitTest_RelationalCool_COOL2XML mytest which will download ... the COOL data in XML format to a file named mytest.xml This can be transformed to the SCT XML format ... In SR1, the code is at: /daqsoft/cool/SCT_TEST_COOL_1_2_4/src/RelationalCool/tests/XML2COOL The ... latest transform can be found at http://sroe.home.cern.ch/sroe/xsl/SCT2COOL.xsl ...
5K - last updated 2006-06-19 22:33 UTC by