- LMT04 Z-2 VVCSEL 5.0V
- LMT04 Z-3 VVCSEL 5.0V
- LMT04 Z-4 VVCSEL 5.0V
- LMT11 Z-4 VVCSEL 4.5V
- LMT17 Z-6 VVCSEL 3.0V (reduce effect of light leak, known from assembly test)
- LMT23 Z-6 VVCSEL 4.3V
- LMT28 Z+2 VVCSEL 3.0V
- LMT29 Z+1 VVCSEL 3.5V
- LMT33 Z+4 VVCSEL 3.2V
- LMT08 Z-4 SELECT = 1 (command reception unreliable in SELECT=0, known from assembly test)
- LMT38 Z-6 SELECT = 1 (no pin current, known from assembly test)
- LMT40 Z-6 SELECT = 1 (Reduces [slightly] noise slope on LMT 40 Z-5)
Dead Vcsels
- LMT02 Z+4 link0 modified module in place
- LMT10 Z+6 link1 DIED DURING COLD TEST - was later repaired
- LMT29 Z+1 link0 modified module in place
- LMT35 Z-6 was replaced by Japan 941 (modified module) due to flakey opto-link.
Z- useful runs
- 9454-0 RxThreshold
- 9454-1 ChipCounterTest
- 9455-0 NMask completed without errors
- 9455-1 Pipeline completed without errors
- 9455-3 StrobeDelay completed without errors
- 9455-4 3PG completed without errors
- 9455-7 NO completed WITH errors
- 9455-8 DTN completed without errors
- 9459-0 NMask completed without errors
- 9459-1 Pipeline completed without errors
- 9459-3 StrobeDelay completed without errors
- 9459-4 3PG completed without errors
- 9459-7 NO completed without errors
- 9459-8 DTN completed without errors
Z+ useful runs
- 9468-0 RxThreshold
- 9469-0 NMask (Quick) completed without errors
- 9469-1 NMask (FULL) completed without errors
- 9469-2 Pipeline completed without errors
- 9470-0 StrobeDelay completed without errors
- 9470-1 3PG completed without errors
- 9470-4 NO completed without errors
- 9470-5 DTN completed without errors
- 9473-0 NMask (Quick) completed without errors
- 9473-1 STN (SyncTriggerNoise) completed without errors!
- 9473-2 ChipCounterTest
Full B4 useful runs
It was at this point that LMT10 Z+6 link1 died, so the affected module was reconfigured to read 11 chips through link0.
- 9480-0 NMask (Quick) completed without errors
- 9480-1 StrobeDelay completed without errors
- 9480-2 3PG completed without errors
- 9480-5 NO (SyncTriggerNoise)completed without errors, low statistics
- 9482-0 STN, SyncTriggerNoise, completed without errors! high statistics
LMT10 Z+6 link1 recovered at this point.
- 9497-0 STN with TX delays optimized (see TimingIn)
- 9500-1 DTN with TX delays optimized
Known B4 noise anomalies
- LMT12 Z+2 DTN noise slope in last chip
- LMT17 Z-6 DTN feature due to low level light leak
- LMT23 Z-2 DTN vague stripes
- LMT25 Z-6 DTN structured noise slope in last 2 chips
- LMT34 Z-3 DTN stripes
- LMT35 Z-3 DTN small blip in E13 ~ bin 130
- LMT38 Z-6 DTN stripe in chip S10 ~ bin 126
- LMT40 Z-6 3PG/DTN/NO offset/noise slope in last 2 chips, not a property of the module as it has aready been replaced
- LMT40 Z-6 DTN stripe in chip S10 ~ bin 126
- LMT40 Z-5 DTN noise slope in last chip
LGS Candidates
- LMT 20 Z+4 Jap 615 S3 (1st scan point)
- LMT 13 Z+6 Jap 724 E13 "
- LMT 10 Z+3 Jap 787 M0 (1st)
- LMT 08 Z+1 Jap 887 M0
- LMT 09 Z+1 Jap 816 M0
- LMT 02 Z+6 Jap 703 S11 (1st)
- LMT 40 Z-5 Jap 793 M8 (1st)
- LMT 15 Z-1 Jap 683 S4 (3rd)
- LMT 05 Z-3 Jap 738 S12 (3rd)
- LMT 05 Z-5 Jap 734 S10 1-2-3 strange?