Require attention
- Alan: There's a line in AnalysisService/src/StrobeDelayAlgorithm?.cpp that variously says "const double fraction=0.25" in the head branch (pre C2), and "const double fraction=0.4 in the online 21 branch and 3_0 branch". I have changed the value in head (post C2) to be 0.4 to match the others. Could you check that this is the correct choice. ( Chris ) ( I ask as BOTH changes were added INDEPENDELTLY -- one was not "corrected from the other" )
- PWP: There is an issue here. For 98% of barrel modules, 0.4 is the correct value to use for the SD fraction - but the other 2% need a smaller number such as 0.25. It could be that we donlt use any of those on the barrels, but we should perhaps be ready with a solution just in case. (I don't know what the situation is in the endcap community...)
- ConfigServer?/GUI comms - dosent seem to notify GUI of change to module map etc.
- Message:
sctGui::TestSelection : Unrecognised testname: FullBypassBarrelTest
- Noted by Alan 5/8/04
- Message:
- Fullbypass - Not displayed by GUI.
- Noted by Alan 5/8/04
- Check status of
However I now see