(16:11:22) Alan: Ok what do you want me to test? (16:11:54) PeterP: 1) all modules that work in one group, present code (16:12:08) PeterP: 2) all modules that work in on group, code from HEAD (16:12:38) PeterP: 3) when we get some errors, we could try to turn on the integrated error decoder (16:12:39) Alan: (2) means DSP code from HEAD? Other code from HEAD? (16:13:03) PeterP: 2) means DSP code from head - you should just need the images. (16:13:30) PeterP: Images for 3 I will make available by scp. Will only be slave images, mdsp code will be as from HEAD (16:13:38) Alan: Ok (16:13:43) PeterP: Maybe try 1 for now, or run all tests with present code? (16:13:47) Alan: Sorry for my slowness - sleep deprived! (16:14:20) Alan: Will do 1 today, and see how far I get. Will pass over to Dave for part of tomorrow morning, and then I'll take over just before lunch again.
Testing run 1058, /daqsoft/sct/SctRodDaq_0104, /daqsoft/sct/oks/srsctdaq1/SctPartition?.data.xml
[MDSP: utilities.c, 620]:: SCT DSP code version 1.2.0a Oct 10 2005 15:01:32 Formatter code version SCT e 20 40 MHz EFB code version e 2b Router code version e 21 Controller code version e 1c [SDSP 0: utilities.c, 620]:: SCT DSP code version 1.2.0a Oct 10 2005 15:00:03
1058 - 0 NMask. Stalls at bin 121 with data errors. - 1 Pipeline. OK. - 3 NMask. Stalls again same bin - 4 FB. OK except module 106 - Link 1 is turned off because of data errors. - 5 Quick NMask. ok.
17:25 HV on. Channel 1 trips @ 30 V. Take out module 005. Others ok.
1059 - 0 SD ok. - 1 3PG. ok. - 4 NO. ok. - 5 DTN. ok. - 6 RC. ok. - 16 STN. fails. First 200-ish events ok. FFT veto? NO - this is a TIM2.
New DSP CODE
18h00 Reflashed MDSP with /daqsoft/sct/devdsp/mdsp120b.bin + used _error_ SDSP code from same directory.[MDSP: utilities.c, 620]:: SCT DSP code version 1.2.0b Nov 1 2005 19:29:52 Formatter code version SCT e 20 40 MHz EFB code version e 2b Router code version e 21 Controller code version e 1c [SDSP 0: utilities.c, 620]:: SCT DSP code version 1.2.0b Nov 1 2005 19:14:10
1060-0 NMask - now completes correctly- but no errors detected - magically fixed? 1060-1 NO. good. 1060-2 STN. fails after ~300 events in bin 0. Too high a data rate? [srsctdaq1] /daqsoft/sct/SctRodDaq_0104 > less ~//SctApiCrateServer0_ctatsct01_srsctdaq1.cern.ch_10590_15.out In the STN: [SDSP 1: histogram_sct.c, 779]:: Link 105 Chip 2 Chan 65536 ABCD_ERROR: code 5: n_errors 1
18h23 Turn on all fibres - try to inject errors. (two were off before.)
1062 - 0 NMask. SctApiCrateServer0_ctatsct01_srsctdaq1.cern.ch_12037_15.outGeneral problems observed:
- SLFF -> s-link fifo full remains lit even when no slink is attached and ROD has been hardware reset
- GUI problems communicating with other processes.