For Barrel3 testing, we used SctRodDaq version 3.
For Barrel6 and Barrel5 testing, we are using SctRodDaq version 4.
During assembly shifts, [ShiftCheckList] is used.
For setting up the readout of the barrels, take a look at BarrelConfig as well as OpticalConfig.
For setting up the Interlock, take a look at Matrix programming.
The hardware documentation for Barrel 3 is at Barrel3HardwareConfig and at PowerSupplySystemSetup.
Barrel3Analysis contains the offline analysis of Barrel 3 cold runs.
For more information, look at the [DAQUSER] page