2DBOCscan
A 2DBOCscan scans through the RxDelay and RxThreshold at the same time, picking the best values for both ... at the same time. It is a "super-fast" scan. The analysis of the scan is carried out in the ... http://www-pnp.physics.ox.ac.uk/~demirkoz/2DBOCscan1.png === Useful additions === It would be a good ... of it for handy reference: <pre> INT32 bocScan(PrimData *primData) { INT32 returnCode= SUCCESS, ... errorCode; BocScanIn *primInput = (BocScanIn *) primData->priBodyPtr; ...
8K - last updated 2008-08-07 20:10 UTC by
AlanBarrToDo
== Top Priorities == * Comparisons of data should be to reference set rather than to "ideal case" * Monitoring ... for GUI ** Some way of putting non-consecutive scans into an analysis ** include continuous 3-pt gain ... On hold for the moment ==In Progress== * Running scans with Tim sequences. * Boc Setup Tests ** Previous ... MySQL c-api == on hold == * Non-sequential scan points * investigate load/config separation. * ... * Find out what's wrong with ROD after raw scan ** need to fix standard dump first * Accumulate ...
4K - last updated 2006-07-07 22:25 UTC by
AnalysisService
It is the job of the <CDoc SctAnalysis::AnalysisService> to work out how a module has responded ... for each module. When new <CDoc SctData::ScanResult> objects arrive, either <CDoc SctData::FitScanResult> ... or <CDoc SctData::RawScanResult>, they are added to (creating if necessary) ... waiting until it has all the <CDoc SctData::ScanResult>s it needs before trying to do the analysis ... the trim range one must be sure that one has all scans for a particular range are present before proceeding ...
1K - last updated 2004-03-04 17:17 UTC by
AnybodyToDo
== DAQUSER's WISHLIST == This is a list of things which if ANYBODY (who has time) did, would be very ... shown to be insufficient? * Tim "OnePointGain" scan for off-rod calibration * Right click on module ... all modules on a ROD won't go any faster. But a scan that only changes the appropriate thresholds should ... at this is now in CVS, needs testing * Probe Scan ** Seems not to work when there are a large number ... update config? ** Translation: There may be some scans/tests which don't depend on the results of previous ...
5K - last updated 2008-08-20 14:19 UTC by
ArchivingService
Saves data for long-term retrieval. Primarily written by AlessandroTricoli. Ideas for updates in [[SctRodDaqRelease3]]: ... and SequenceData objects this will enable * Save scans and tests as they become available rather than ...
1K - last updated 2003-11-24 17:06 UTC by
Barrel3Analysis
There are several people doing analysis of [[Barrel3]] on data taken during assembly, and during warm ... using the [[OxfordSetup]]. === Log books === * Scanned versions of the paper [http://www-pnp.physics.ox.ac.uk/~daquser/Logbooks/ ...
3K - last updated 2005-05-04 12:17 UTC by
Barrel4ColdTest
<b>MoPS Exceptions</b> * LMT04 Z-2 VVCSEL 5.0V * LMT04 Z-3 VVCSEL 5.0V * LMT04 Z-4 VVCSEL ... * LMT 20 Z+4 Jap 615 S3 (1st scan point) * LMT 13 Z+6 Jap 724 E13 " * LMT 10 Z+3 ...
1K - last updated 2005-09-12 10:13 UTC by
Barrel6ColdTest
A summary of [[Barrel6]] features applicable during the cold test... == B6 Z- ALONE == *NOT TESTED: ** ... it continues to cause errors at Bin 14 of a NO scan, causing the scan to abort for the associated ... fails due to IPC timeout. Offline, missing 3rd scan point. Archiving service didnt finish? *** 5874-0 ... errors *** 5875-1 ThreePointGain - ROD1 aborts scan 3/3 bin 38/40, but data valid ** RUN 5882: reduced ...
3K - last updated 2005-10-04 15:21 UTC by
Barrel6Exceptions
Features on [[Barrel6]] ==Executive Summary: Modules with Major Faults== These are the modules which, ... * lmt56 Z+4 chip S3 was dead. * lmt39 Z-3 Scand 179 lk0 had extremely high noise! ==Known fibre ... * lmt17 z-5 UK519 --> NOW IS OK. * lmt23 z-5 Scan22 --> NOW IS OK. * lmt33 z-5 US92 --> NOW ...
2K - last updated 2006-03-29 12:05 UTC by
BarrelConfig
Part of [[OxfordSetup]] Here we describe the format of pre-defined files that are used in SCT DAQ. These ... production site with 04=US, 17=Japan, 33=UK, 38=Scandinavia and nnn=serial number. Under the lmtXX ...
1K - last updated 2005-07-14 11:25 UTC by
BilgeToDo
== In Progress== ?? == DONE == Thesis Debugging ROS issues during physics running Get TDC/ADC setup to ... of 4 DoubleTriggerNoise that were done as raw scans -- involves reanalysing, grabbing DCS information ...
1K - last updated 2007-05-13 19:44 UTC by
BocSetupTests
These tests are designed to setup the registers of the back-of-crate card ([[BOC]]). *RxDelayTest *RxThresholdBasedOnConfigRegisterTest ... *[[2DBOCscan]] *TxCurrentTest *MarkSpaceRatioTest *RawScan ...
1K - last updated 2006-12-11 16:50 UTC by
BoostOptional
Describe the new page here. <pre> gdb $SCT_DAQ_ROOT/installed/i686-slc3-gcc323-dbg/bin/CalibrationController ... (this=0x9868018, runNumber=2029, scanNumber=0, modulelist=@0xb6f86f0) at /usr/include/c++/3.2.3/bits/stl_alloc.h:664 ...
2K - last updated 2005-12-06 13:49 UTC by
BruceGallopTodo
Most of this moved to SctApiToDo, what remains needs sorting. See also https://savannah.cern.ch/bugs/?group=atlassctroddaq, ... 48). == Useful things == Doug mentioned running scans using data from INMEMs. This would be useful ... (needs testing) == Preliminary IPC support for ScanMonitor (for online histograms). This should now ... not me) === * HistogramMechanics class for each scan type? ** ScanControl done for normal scans, TIM ... separate class ** Raw scans too? *** Raw scans have been made asynchronous, ...
3K - last updated 2007-04-17 16:05 UTC by
BugFixesForOmniMigration
===Require attention=== * [[Alan]]: There's a line in AnalysisService/src/StrobeDelayAlgorithm.cpp that ... bugs However I now see ===Allocated=== * RawScanResultStreamer - version 3 needs fix ** Noted by ...
1K - last updated 2005-02-14 18:01 UTC by lapnat.physics.ox.ac.uk
CalibrationController
Overall high-level responsibility for running the stages in a calibration is given to the CalibrationController. ... Note that this procedure wont work for scans of BOC variables, which arent stored in ABCDModule ... Start Test **** cc requests API autoUpdateBanks(SCAN) **** Setup Scan ***** (api does) api -> SCAN ... **** Start Scan ***** (api does) SCAN->Module ***** (api modifies ... scanned variable to final scan point) **** End Scan ...
2K - last updated 2005-08-07 16:28 UTC by
CheckingMappings
==Tx to Rx== To check TX <-> RX mappings, do: <pre> SctGui -> Tools -> Launch SctApiGUI ... -> autoConfigurer -> preform scan </pre> Look for any entries in the last ... View Right Click -> Actions -> DCS mapping scan </pre> The output to the command line should ... as expected. ==Tx to Module== Do a threshold scan (e.g. via 3 point gain) and look at VT50 RMS. ...
1K - last updated 2006-05-02 09:44 UTC by
CombinedRunning
This page replaces the old [[Sr1Setup]] page, which is largely obsolete. BuildingSctRodDaq is some tips ... -p on BOC, SlinkTest -s11 </pre> == Timing Scans == From beanshell: <pre> .x expandedModeFormat.java ... .x anyHitMode.java .x physicsModeTimingScanCoarse.java </pre> root file is created in ...
1K - last updated 2006-06-21 14:38 UTC by
Configuration
== CORAL/COOL == OK, current next generation is CORAL/COOL, the main advantage being that the same database ... start-up. -- [[Alan]] Or by doing some sort of scan..then it automagically updates the configuration! ...
1K - last updated 2006-08-22 09:30 UTC by
ConfigurationFileComments
==Config word== The ABCD chip configuration is stored directly in the configuration file. This looks ... event trailer and is used during internal ROD scans to abort the histogram. The value is a bitwise ...
1K - last updated 2009-09-11 13:45 UTC by
ConfigurationPerformanceImprovements
===First attempt=== [[Alan]] writes... So far I've done * SctApi keeps a cache of all ROD banks (lazy ... ** except it always (at the moment) sends the SCAN bank, as we know that it changes during the scan, ... and the API's ROD-BANK cache at end of a NMask scan * I think the mask differences come from the fact ... that I just did an NMask scan * How does the present flag get set? ** BJG says ... One question is whether we should read out the SCAN bank to put it with the histogram results. The ...
1K - last updated 2005-03-03 15:03 UTC by
CorbaExceptions
Most useful ones (including CORBA::TERMINATE) are defined in [http://www.hep.phy.cam.ac.uk/~atlasdaq/FilesForWikiDownload/CORBA_Exception.h ... file) but I have now implemented non-blocking RawScans, so in version 1.5 of the file, I have removed ...
1K - last updated 2005-01-26 14:22 UTC by
DaqMeetingJune2005
For agreed actions see [[DaqMeetingJune2005ActionList]] ===Many-module "test" system(s)=== *Short-term: ... in TestData ("Synch") * Bug: Raw/"Cooked" scan problem * Bug: SynchTrigger * Database issues ...
1K - last updated 2005-06-30 08:48 UTC by
DaqMeetingJune2005ActionList
==Available test systems== ====Short-term test systems==== * [[Barrel5]] - the afternoon and evening ... Off-crate rudundancy ## Nothing exists yet. === Scan Options === # [[Alan]] to add missing scan options ... good idea to try and see what breaks ## BJG Scan option to analysis stream would help things # ...
1K - last updated 2005-09-14 20:11 UTC by
DataDisplayerExamples
Examples of how to use the DataDisplayer <pre> $ DataDisplayer --help </pre> to see the options. ... $ DataDisplayer -occ EventData.SctData::RawScanResult.1317.1.20220170100029 </pre> displays ... DataDisplayer -chan 0 15 saved_data/SctData::FitScanResult.1317.1.20220170100029.gz </pre> requests ...
1K - last updated 2005-01-29 00:42 UTC by
DataModel
The data produced by the [[ROD]]s are primarily in the form of 2-D occupancy histograms, where the x-axis ... are sent to [[IS]] by the SctApi using the ScanResultWriter. This is a Serializable, meaning that ...
1K - last updated 2004-07-23 11:41 UTC by
DebuggingNewIO
How to debug IS <pre> export TDAQ_PARTITION=SCT_IO_TEST ipc_server & ipc_server -p $TDAQ_PARTITION ... </pre> StressFilePublisher makes a fake RawScanResult and publishes it. Note that for future StressFilePublisher ... <number> to start publishing with larger scan numbers since we dont enable overwrite. Should ... DataDisplayer SctData::RawScanResult.666.0.012345678901234 </pre> and also ... DataDisplayer TEST.SctData::RawScanResult.666.0.012345678901234 </pre> ...
1K - last updated 2008-08-20 14:29 UTC by
DoubleTriggerAnalysis
This page documents the preliminary analysis of DoubleTriggerNoise data from Barrel 3, 4 and 6 cold runs ... was analysed by the online software is Run 2145 scan 2. Some of the "funny" plots from this run are ... about DoubleTriggerNoise Runs: <pre> 2145 scan 2 From GUI. "correct trigger" shows light leaks ... run incomplete. 369 out of 384 modules. 2176 scan 0 From script. unknown no light leaks 2177 scan ... 0 From script. unknown no light leaks 2185 scan 13 From script. "wrong trigger" no light leaks ...
5K - last updated 2007-04-12 20:41 UTC by
DspCodeToDo
DspPrimitivesReview == Changes to DSP Code == Error handling: * Read out errorInfo structs * mask faulty ... Is this a problem if a module turns off during a scan? *** Problem may only arise if it comes back (in ...
1K - last updated 2006-02-08 10:28 UTC by
ErrorEventDecoder
This page describes the output of the Error Event Decoder which has now been incorporated into the DSP ... present version of the mdsp code will abort the scan if one single event contains any errors. (This ... still small number of errors to occur before the scan is aborted.) So your first observation will probably ... be that the scan has ended prematurely. ==What if I want to know ... last event, namely the event which caused the scan to abort. You should observe information as described ...
5K - last updated 2009-09-11 17:23 UTC by
EventData
This is the InformationService server which contains the data which comes straight off of the [[ROD]], ... a RawScanResult ...
1K - last updated 2004-07-22 20:53 UTC by
FittingService
===Important Note=== Since [[Release4]] of the software FittingService needs arguments. These are supplied ... </pre> The FittingService retrieves RawScanResult data from the [[IS]] servers and attempts ... to fit a function to it. Most of the analogue scans involve changing some approximately-continuous ... FitStrategy. The result of the fitting is a FitScanResult, which is published back into the OnlineSoftware ...
1K - last updated 2005-02-12 22:26 UTC by
FittingServiceFunnies
== AnalysisService == [http://www-pnp.physics.ox.ac.uk/~barra/WikiPlots/3024.5.20220170100002_channelRC_1.ps ... Wiggles in trim steps, possibly caused by trim scans being to restrictive on the threhold range scanned. ...
2K - last updated 2005-02-28 17:37 UTC by
HangingCalibrationController
== Mail of Wed, 1 Mar 2006 18:52:00 == <pre> Some Good News ! With some helpful suggestions from ... the CC would hang on shutdown if you had run any scans/tests, but not otherwise, and not always 100% ... memory allocation for the CORBA IPCServants for ScanRequest, TestRequest and SequenceRequest. Unfortunately ... then in your error report NOTE WHICH TESTS/SCANS/SEQUENCES you ran, and also send me the STDERR ... Diffing src/scripts Index: src/scripts/DefaultScan.h ===== RCS file: /afs/cern.ch/user/b/bgallop/cvsroot/CalibrationController/src/scripts/DefaultScan.h,v ...
6K - last updated 2006-03-01 19:04 UTC by
HardwareProblems
You shouldnt need this if you follow instructions for SettingUpDaqHardware There are numerous things ... are listed below. Many are diagnosed using ScanVme. * If the TIM doesn't appear this could be ... (check the TIM first) * A ROD doesn't appear in ScanVme at all (this is easy to diagnose!) * A ROD ... log file somewhere... If everything turns up in ScanVme then try TouchRod and EchoTest from RodUtils. ...
1K - last updated 2005-03-24 01:19 UTC by
HistogrammingProblemsInPhysicsMode
While trying to run the ( version 1.1.2.5 of ) physicsModeTimingScan.java in TDAQ14_BRANCH under SctApiIPC/scripts, ... and expandedMode and we started a histogram scanning from 0 to 31 bits of the TX_DELAY variable ... /work/srsctdaq1/sr1daq/saved_data/SctData::RawScanResult.2526.0.*.gz and /work/srsctdaq1/sr1daq/saved_data/TestData.2526.0.PhysicsModeTimingScan.gz ...
1K - last updated 2006-05-05 14:35 UTC by
HowToAddANewAnalysis
To start with I'll work out what to do to change a current analysis algortihm. The algorithm itself is ... HowToAddANewFit. === Adding Analysis for RxScan2DTest === The following files were added: SCTData/src/RxScan2DTestResult.cpp ... SCTData/src/RxScan2DTestResult.h SCTData/src/IO/RxScan2DTestResultStreamer_v1.cpp ... SCTData/src/IO/RxScan2DTestResultStreamer_v1.h AnalysisService/src/RxScan2DAlgorithm.cpp ... AnalysisService/src/RxScan2DAlgorithm.h SummaryWriter/RxScan2DSummaryWriter.cpp ...
1K - last updated 2008-06-09 08:52 UTC by
HowToAddANewTest
Simple: First, the test 'scripts' are in: CalibrationController/src/scripts The most important distinction ... is between raw and 'cooked' scans, after that most new tests are small variations ...
1K - last updated 2007-08-01 10:46 UTC by
HowToRunASystemTest
To run the system tests from a release file: # Set <code>SCTDAQ_ROD_CONFIGURATION_PATH</code> ... be able to use the CalibrationController to do scans in the normal way (although not all work) and ...
1K - last updated 2004-01-17 18:10 UTC by
IS
IS is short for Information Service. It is part of the Atlas OnlineSoftware, and is used for sharing ... complicated in IS, grep through the code for ScanErrorData. You should find that an xml file SctApi/IS/SctApi.schema.xml ... from it which lands in SctApi/SctApiIS/ScanErrorData.h which can then be included and used ... // Publish something in IS ScanErrorData errorData; errorData.partition = rodLabel.partition; ... for flagged errors int side = l % 1; int run = scanEx->runNumber; int scanNum = scanEx->scanNumber; ...
1K - last updated 2008-07-17 12:50 UTC by
ISPublishProblems
SctApi/SctApiRaw.cxx publishes things using code like: const boost::shared_ptr<Trigger> trigger ... = scan->getTrigger1(); #if USE_IS if(m_isDict) { ISInfoInt ... binNumber); ISInfoInt maxNumber(scanPoints.size()-1); m_isDict->insert("SCTAPIServer.maxBin", ... << currentTest << currentScanIndex; } method which the ISUtilities use to guarantee ...
1K - last updated 2005-01-13 14:30 UTC by
IssuesDuringOmniMigration
Problems and queries arrising during the migration to online-00-21-02 from online-00-19-01. ---- See ... ChrisLester: Current: * See RegisterErrors * Boc scans seem to be broken and have possibly never worked ... under this release. See MergedBocScanErrors and http://www.hep.phy.cam.ac.uk/~atlasdaq/images/bocscanerror.png ... out. ** SctApiServer maintains a list of all the scans that have been done, basically for memory management ... purposes... Because SctApi doesn't know the Scan is a CORBA object it doesn't know when to delete ...
6K - last updated 2004-12-09 16:39 UTC by
JanuaryTestingWeek
==Aim== To find out any remaining problems with SctRodDaq which could compromise our ability to do stand-alone ... <I>Problems when no modules in group 0. Scan completes, but histograms are empty. Applies to ... **NMaskTest *** Used to fail after any scans with TIM triggers, in fact this was due to the ... cannot be biassed, however the noise occupancy scan remained very slow. **Module ...07 was found to ... 27 Jan</i> * Run state transitions and BOC scans for dummy config containing several hundred modules ...
3K - last updated 2006-03-31 11:28 UTC by
KnownBugsInDspCode
Note to self - see mail from Douglas on 25/26 may 2005 for replies. ==Bugs, buglets and problems to sort ... bank is getting sent to modules at start of scan. <pre> RodDaq/Dsp/Sct/Code/masterTasks_sct.c:1034 ... has if (hc.scan->reset.moduleInit) { //type= (1<<CONFIG_MODULE_ALL); ... we dont want to do this (we have modified the SCAN rather than the PHYSICS bank) however there dosent ... in SctApi.cxx - modify both PHYSICS and SCAN with multi-config-set so that they are the same. ...
2K - last updated 2005-07-05 15:50 UTC by pb-d-128-141-35-188.cern.ch
MarkSpaceRatioTest
One of the BocSetupTests. The idea behind this test is to set up the TX duty cycle (Mark:Space ratio) ... the module in clock/2 mode * doing RxDelay scans at different mark-space register settings * sending ... (send soft reset) * doing another RxDelay scans at different mark-space register settings * minimising ...
1K - last updated 2005-03-22 22:09 UTC by
Merge-C6-C7
(See also MergingPagesForOmniMigration) First * Freeze SctRodDaq_3_0_BRANCH ** Chris sent mail 5th November ... line was removed from CC/src/scripts/RawScan.h between v1.4 and v1.5, i.e. during the OmniMigration. ... merge, including one extra set of changes to RawScan.h that were related to the new RxThreshold but ...
3K - last updated 2004-11-10 11:31 UTC by
Merge-C8-C9
(See also MergingPagesForOmniMigration) First * Freeze SctRodDaq_3_0_BRANCH ** Haz been frozen since ... from api.getABCDModule(mid, SCTAPI_BANK_SCAN); to api.getABCDModule(mid, SCTAPI_BANK_CALIBRATION); ...
1K - last updated 2005-11-02 10:37 UTC by
MergedBocScanErrors
The fist sign of trouble: Histogram polling timeout grep -a -A10 -B10 "olling timeout" /usera/sctrod/logs/SCT/sctrod/SctApiServer.out ... polling started Polling histogramming task scan point count 40 Next bin 1+162 on ROD (0, 0, 0) ... rod slot: 5 -- Source in SctApi/SctApiHisto.cxx ScanControlRODHisto::reportTimeout() produces "Scan ... probs caused by error in implementation of RawScan causing doScan rather than doRawScan to be called. ... them to cvs. (22/11/2004) Now I can run a RawScan, and even my new RxThresholdBasedOnConfigRegister ...
1K - last updated 2004-12-03 18:41 UTC by
MergingPagesForOmniMigration
(See also OmniMigration) Summary Picture: http://www.hep.phy.cam.ac.uk/~atlasdaq/images/MergePic.multicrate.png ... was found to be incapable of doing any non-BOC scans. This seemed to be something to do with the configuration ...
1K - last updated 2005-03-09 16:49 UTC by
ModuleDataFile
This file lists the location of SCTDAQ root data for various tests and module serial numbers. The format ... data path> <run number> <start scan number> Where <test name> is one of: ...
1K - last updated 2004-01-17 18:02 UTC by
ModuleDiagnostics
No response # Is the module power on? # Is Icc above 100mA? If not, no module is connected. # Is Idd ... This can be confirmed by running any standard scan with on ROD scan control, such as an NMask test. ... If any chip is stuck in an error state, the scan will abort right away. To recover, try send the ...
1K - last updated 2006-02-10 16:29 UTC by
MultiCrate
For tips on how to set up a MultiCrate system see MultiCrateTips <a href="http://www.hep.phy.cam.ac.uk/~atlasdaq/FilesForWikiDownload/nmask.moomoomoo.log">This ... what happens</a> when you do an [[NMask]] scan, so far as SctApiServer is concerned. SctApiSplit ...
1K - last updated 2005-10-14 10:45 UTC by
MultiCrateTodo
Parallelise: void SctApiServer::doScan(Sct_SctApi::Scan_ptr thisScan) ...
1K - last updated 2005-05-26 12:25 UTC by
NMaskTest
This test validates that the DAQ can read out various-length signals from the modules. It incriments ... contents of the mask register. The resultant RawScanResult plots should have a triangular form for ...
1K - last updated 2006-01-07 10:22 UTC by
NPtGainProblems
[[Bilge]] reported 2nd Dec 2004 22:48:55 <pre> Hello Alan. Fitting failed on the Noise Occ test ... ...
1K - last updated 2005-01-26 17:04 UTC by
NewFeatures
New features of SctRodDaq. Mostly, in need of testing. * Check MiniUtils for new commands that have been ... group -1 can be used to disable a module from a scan * Fast 2D BOC scans is almost done * Configuration ...
1K - last updated 2007-06-01 15:33 UTC by
NoiseOccupancyTest
The purpose of this test is to measure the noise occupancy at different thresholds. A plot of log(noise ... estimate of the noise from the noise occupancy scan, since the line we are trying to fit is not particularly ...
1K - last updated 2004-11-15 12:23 UTC by
OPEAnalysis
Part of [[Barrel3Analysis]] OPEAnalysis analyses data from the [[OccupancyPerEvent]] Data using [[OPETool]]. ... Run 2180] Scan 0 now has been analysed. This run is the most ... as having "high badness" chips. New: Run 2180 Scan 0 was taken before this analysis was available. ... for checking the results above. * Run 2179 Scan 0 -- Slot 14 failed (Z+ LMT1-8) and caused abort ... at the end of the scan with threshold -35. So there is no data for threshold ...
2K - last updated 2005-08-11 12:20 UTC by
OccupancyPerEvent
Helpful in trying to get a handle on common-mode noise pickup. The [[ROD]] [[DSP]]s can record the number ... consisting of [[OPE]] on the x-axis and scan point (threshold) value on the y-axis is shipped ... off the [[ROD]] with the RawScanResult. The [[ROD]] histograms the number of hits ...
1K - last updated 2005-05-26 16:58 UTC by
OffRodRedundancyHandling
This page describes the handling of modules that are attached to two different RODs. This may occur when ... configuration if there are no modules to do a scan on it. Thus an extra module may need including ... can probably be fixed). You can't run normal scans as the trigger for the redundant connection to ... itself with the ROD receiving the data. TIM scans should be fine. (this can't be fixed, it may ...
1K - last updated 2005-01-26 15:50 UTC by
OksSchemaDevelopment
Possibly misnamed, this also applies to any additions to any other kind of configuration. What needs ... clock mode is a temporary thing used in raw scans. These are probably transient, controlled by ... a scan or by methods: * Whether to trap TIM, TTC or ROD ...
2K - last updated 2005-12-09 09:02 UTC by
OnasicRecipes
[https://twiki.cern.ch/twiki/bin/view/Atlas/AtlasTDAQDataBaseONASIC Onasic documentation] == ! IMPORTANT ... local filesystem output dir. The default dir is scanned by the systemwide onasic_oks2cool and automatically ... type="u32">79472</attr> <attr name="scanNumber" type="u32">0</attr> <attr name="startTime" ... type="u32">79926</attr> <attr name="scanNumber" type="u32">0</attr> <attr name="startTime" ...
1K - last updated 2008-08-05 14:02 UTC by pcatsct06.cern.ch
OnePointGain
Suggestion: * Single threshold scan with 2fC input charge? * Check for trimming and input noise... * ... Start with ROD scan? (Tim harder) ...
1K - last updated 2006-07-10 13:20 UTC by
OnlineHistogramming
== What is it? == This page refers to histograms built in the ROD, using event data captured using triggers ... is set to TIM_EXTERNAL. # Use an asynchronous scan, this histograms as many events are received, ... until told to stop. api.startAsyncScan() returns a monitor object which has methods nextBin() ... and finishScan(). Currently there are three scripts runnable ... .X onlineHisto.java will start a scan using method 1) that watches the TIM for 10 events ...
1K - last updated 2006-04-10 17:16 UTC by
PhaseMeasurement
This page documents how to make the phase measurement of the cosmic trigger with respect to the 40Mhz ... 0x400000 -- but it replies to 0x600000 from vmescan! ./corbo_test 0x600000 1 30000 15 vmeconfig -a ...
5K - last updated 2006-10-17 12:53 UTC by
PhoneMeeting
== Agenda == Current state of [[SctRodDaqRelease2.1]] * progress with [[Doug]] and [[Bruce]] * documentation ... == Minutes == DSP Code * Crashed when running scans. [[Bruce]] investigating as a top priority, with ...
2K - last updated 2003-11-28 15:03 UTC by
PhoneMeeting2
16/3/2004 Issues: == How to proceed when a module dosen't behave well (e.g. LV trip) == note : Requires ... probably insufficient. # API produces dummy RawScanResult with some sort of status info ## a bit nasty? ... is a definate possibility for release 4 == Raw Scans == * Think about implications for structure/storage ...
1K - last updated 2004-03-16 14:47 UTC by ppnt164.physics.ox.ac.uk
ProbeData
0 stuck OFF (no response) 1 stuck ON 2 clk/2 4 clk/4 A Valid ABCD error code (1, 2 or 4) - issue soft ... error code (corrupt data - try RxThreshhold scan etc) C Module in Config Readback mode - reconfigure ...
1K - last updated 2006-06-30 14:05 UTC by
ProblemWithBocSetupTests
Running doRawScan exclusively: http://www.hep.phy.cam.ac.uk/~atlasdaq/images/Raw.1209.0.20220170100053_1.gif ... Running doRawScan in a thread: http://www.hep.phy.cam.ac.uk/~atlasdaq/images/Raw.1210.0.20220170100053_1.gif ...
1K - last updated 2005-01-21 18:21 UTC by
ROD
The Read-Out Device is responsible for decoding the data from the modules and off-loading event data ... is also possible using the RodUtils suite. ScanVme is also a very useful program. ...
1K - last updated 2008-04-18 14:31 UTC by
RawScan
This sends triggers to the modules and records (in a histogram) the actual raw bitstream coming from ... See also BocSetupTests ...
1K - last updated 2004-07-19 15:40 UTC by
RawScanResult
This is the c++ class which wraps the data coming off of the [[ROD]] and allows it to be interpreted ... in a sensible way. <CDoc SctData::RawScanResult> ...
1K - last updated 2004-07-22 20:55 UTC by
ReAnalyser
<pre> Usage: ReAnalyse -t <test> -m <module1> <module2> -r <run> -s <scan1> ... <scan2> [-v] [-n] ... -t <test_name> name of ... run number (can be used more than once) -s <scan1> [<scan2> ...] list of scans for current ... and SctData::RawScanResult.5067.95.20220170100038.gz files there with ... NPtGainTest Modules: mymodule1 mymodule2 Run, Scan, TestPoint sets: 1014, 7 -> 0.5 1014, 8 -> ...
1K - last updated 2007-12-14 11:58 UTC by
Release3.0TimingTests
Done at Oxford by [[Alan]], using ~daquser/Release3_branch on 28/7/2004. ----- Both modules in group ... </pre> Run 1320, scans 0->2, repeated 3->5 * NMaskTest: <B>25s</B> ... (aborted near end)</B> * TrimRangeTest (28 scans) <B>30 min.</B> ---- Rough extrapolation ... * TrimRangeTest, shortened version, 12 scans, <B> < 40 mins.</B> ...
1K - last updated 2004-07-28 12:59 UTC by
Release4.0ToDo
* Dave's GUI's refresh-after-run-cycle issue. ** fixed ... at least with work around? * TDAQ_IPC_TIMEOUT ... issue particularly during raw scans (see also CorbaExceptions). ** Should now be ... that split between threaded and unthreaded doScan code should be moved later. This should be done. ...
1K - last updated 2005-02-10 17:41 UTC by
RxDelayTest
The RxDelayTest scans (strobes) and sets the delay of the [[BOC]] opto receiver sample relative to the ...
1K - last updated 2005-03-22 22:12 UTC by
RxThresholdTest
This test is now deprecated replaced by the RxThresholdBasedOnConfigRegisterTest The RxThresholdTest ... scans and then sets the threshold of the opto receiver ...
1K - last updated 2004-12-14 19:39 UTC by
Scan
A series of Histograms. # A chip variable is modified according to a list of values. # For each value ... in the ROD Defined by (C++) <CDoc SctApi::Scan > and (IDL) <IDoc i Sct_SctApi::Scan >. ... == New scans == <pre> > Bruce turned scans from Corba ... the struct directly, but I've also introduced a "ScanBuilder" which can change the struct in ways that ... set. It should also help make the raw and cooked scan requests more similar. >> I have tried running ...
1K - last updated 2009-04-27 10:53 UTC by pcfk.hep.phy.cam.ac.uk
ScanResultWriter
The raw data coming from the [[ROD]] are serialised to [[IS]] by the class <CDoc SctData::ScanResultWriter>, ... with help from the appropriate <CDoc SctData::ScanDataWriter> which allows different internal ... the analysis code is by the <CDoc SctData::RawScanResult> which forms part of the DataModel. If ... onto the [[ROD]] then a new <CDoc SctData::ScanDataWriter> will write that data to [[IS]] as ... a <CDoc SctData::FitScanResult>. ...
1K - last updated 2004-03-04 17:16 UTC by
ScanVme
"scanvme" is included in the dataflow software, so it should be in the path after setting up SctRodDaq. ...
1K - last updated 2003-12-08 11:52 UTC by
SctApi
SctApi is the API used to communicate directly with the SCT modules. The [[TApi]] is used for low level ... It publishes Histograms to IS using ScanResultWriter. It communicates with the DDC using ...
1K - last updated 2004-07-26 12:43 UTC by
SctApiGUI
SctApiGUI brings up a button panel which gives mainly diagnostic/debug access to SctApi. == Probe View ... on any crate or channel in the DCS system. == Scan View == From here any previous scan request can ...
1K - last updated 2004-01-12 12:44 UTC by
SctApiOptions
Defined in SctApiDebug.[cxx|h] String representation is lower case: * DIAG Print some extra things to ... Print the module configuration after a scan * SAVE_PRIM Dump all prim lists to $scratch/PrimLists ... * BOC_SETUP Print BOC setup at end of raw/probe scan * DUMP_RAW_EVENT In decodeEvent, print the raw ... data Some scan options: * SCAN_ERROR_TRAP Make slave 2 capture ... error mode events. * SCAN_ERROR_TRAP_ALL Make all slaves capture error mode ...
1K - last updated 2006-01-31 10:05 UTC by
SctApiSplit
== Methods at Crate level only == Mostly debug or access to low-level features not used in normal Calibration ... long partition, in unsigned long crate); Scans and triggers probably kept track of at top level. ... do. Would need locking on module list updaters. Scan createScan(); Scan getDefaultScan(); Trigger createTrigger(); ... Trigger getDefaultTrigger(); ScanList knownScans(); Translation methods. These are ... a distinct difference here between standard ROD scans and TIM scans, which only need crate level control ...
7K - last updated 2005-02-25 12:53 UTC by
SctApiTests
Things to test at least before a release. Not all these things work yet, but it should be known what ... Full Bypass Test. * 16 bit and 32bit scans, with odd and even numbers of bins. * "Full" ... scan (all 3 time bins) * Auto Configure * Synchronous ... Modules in multple groups * Dual triggers * BOC scans ...
1K - last updated 2004-07-15 17:15 UTC by
SctApiToDo
See SctApiTests for things that should be checked every time. Add Slave single write to RODDiagnostics. ... and Alan): * To facilitate updates from Raw Scans ** Save and Restore now in SctApi *** Is this ... in Calibration Controller (SctApi doRawScan now uses it) * Also for persistent storage of ... redundancy loop can find relative timings by BOC scans ** This is an inter-module analysis (with raw ... scans) Progress bar: * For multiple RODs, the current ...
5K - last updated 2007-04-17 16:33 UTC by
SctDaqHowto
* make sure you have all the necessary software and a working mySetup.csh. * If you start a new shell, ... TestSubmit : Created hists : Created scan : Created module config : Created RawScanResult ... contains 3 object(s): ::: EventData.SctData::RawScanResult.173.0.20220040200007 <1/7/04 14:19:18> ... <SctData::RawScanResult> ::: EventData.SctData::RawScanResult.173.0.20220380200003 ... <1/7/04 14:20:31> <SctData::RawScanResult> ::: EventData.SctData::RawScanResult.1000.100.TestSubmit ...
2K - last updated 2004-12-10 14:24 UTC by ppatlas3.physics.ox.ac.uk
SctGui
SctGui is the primary user interface for SctRodDaq. It provides a graphical representation of the physical ... for any barrel or endcap * invoking of test scans * display showing status of tests and scans in ...
2K - last updated 2006-08-30 10:08 UTC by
SctRodDaqRelease2
SctRodDaq was released as version 2.00 on Tuesday 18 November. This was the first public release. A minor ... charge is being injected. This means that any scan which injects charge actually returns (scan + ... For this reason we have truncated threshold scans at 90mV. However, it still cause huge numbers ...
1K - last updated 2003-12-09 17:54 UTC by
SctRodDaqRelease2.1
SctRodDaq Release 2.1 has one primary new feature over [[SctRodDaqRelease2]]: it includes the new DSP ... with release 2.0. In particular, threshold scans (and therefore response curves, trim range tests ... cut off at 32. * The strobe delay and timewalk scans occasionally fail to work. We believe that this ... probably an issue in the DSP code. * The NMASK scan occasionally gives small errors, which are not ... a fault in the histogramming. * The strobe delay scans (when they work!) do not have 100% occupancy ...
1K - last updated 2004-02-16 18:58 UTC by pplxgen.physics.ox.ac.uk
SctRodDaqRelease3
Release 3 is now available as [[SctRodDaqRelease3.01]] from [[Download]]. See also [[SctRodDaqRelease3.0]]. ... * New DSP code - all of the scans should now work. There are some speed increases ...
2K - last updated 2005-01-11 14:02 UTC by
SctRodDaqRelease3.0
The first public release of [[SctRodDaqRelease3]]. == Known issues with version 3.0 == * See [[SctRodDaqRelease3]] ... relating to ALL 3.XX series releases) * BOC Scans are still experimental and may not work. In particular ...
1K - last updated 2004-07-29 11:18 UTC by
SctRodDaqRelease3.01
This page has not yet been written. In the mean time you had best look at the [[SctRodDaqRelease3.0]] ... leaks memory at a rate of about 1Mb/scan. Do not use this release for intensive studies. ... * Added nth and nth_rem options to the SctApi scans ** Nth tells it to only histogram every nth trigger ... n triggers to histogram * The tim option on a scan selects between different feedback methods ** ... if the trigger frequency is set too high, the scan will fail * Double triggers (closely seperated) ...
1K - last updated 2006-01-19 14:31 UTC by
SctRodDaqRelease3RC
First pre-release of [[SctRodDaqRelease3]]. Outstanding issues: * Has someone checked the SummaryPlots ... all relevant information *** sn, run number, scan number, time, test type... * Configuration propagation ...
1K - last updated 2004-04-07 12:48 UTC by ugps02.ph.bham.ac.uk
SctRodDaqRelease4
This release is the second major release for MacroAssembly and the [[SRBuilding]]. Lessons learned from ... * Review of status logic - e.g. status of Scan, Test, Sequence. On a per-module basis? **'''still ... version of IS is apparently imminent''' ==New Scan / Test List== **''' none of these added yet''' ... mode of ABCD (used during xray alignment) ** Scan mask (the 01 and 10 settings) and see if the two ... ** Should be possible currently to run a scan like this, unless it requires a fixed time between ...
1K - last updated 2005-02-14 12:09 UTC by
SctRodDaqRelease4.1
See [[SctRodDaqRelease4]] for issues related to release 4 in general. SctRodDaqRelease4.1.1 fixes bug ... from api.getABCDModule(mid, SCTAPI_BANK_SCAN); to api.getABCDModule(mid, SCTAPI_BANK_CALIBRATION); ... (index 1) APICALL(s, setOption(Sct_SctApi::Scan::nth_rem, 1), "Failed to set nth_rem option") ... (index 0)! APICALL(s, setOption(Sct_SctApi::Scan::nth_rem, 0), "Failed to set nth_rem option") ...
1K - last updated 2005-05-09 17:03 UTC by
SctRodDaqRelease4.3.RC1
See also [[SctRodDaqRelease4.3]]. == HOW CREATED == [[SctRodDaqRelease4.3.RC1]] was created on 15th Dec ... for the corrected DSP code. * Full scans - fail in analysis service and are not analysed ... and book-keeping ** Automagical book-keeping of scan options not yet in place. One needs to record ... such as synchronicity etc. [[AJB]] ** newer scan results may not be recognised by the GUI. [[AJB]] ... -- [[Chris]] ) * NoiseOccupancy and FullBypass scans sometimes slow ** On both occasions I observed ...
5K - last updated 2005-12-19 11:21 UTC by
SctRodDaqReleaseCandidatesFor3.2
Oxford had many local modifications to their code as a result of barrel 3 assembly. Before integration ... Testing was done at Cambridge on 3 modules. Some scans were found to abort (Scan aborted histogramming ... stalled) at the end of the scan after all the data was (apparently) successfully ...
1K - last updated 2005-01-17 10:49 UTC by
SctRodDaqReleaseCandidatesFor3.2Testing
I tested 3.2.RC1 in pcei.hep.phy.cam.ac.uk:/usera/sctrod/testing_3_2_RC1 <a href="http://www.hep.phy.cam.ac.uk/atlas/macro-assembly/DAQ/release3.2.RC1/BinaryRelease_SctRodDaq_3_2_RC1.tar.gz">This ... and do a full characterisation sequence. No scan in the characterisaion sequence sent an error ...
1K - last updated 2005-02-10 18:02 UTC by
SctTest
This page descibes the SctTest package which is the primary way of testing the system. It is split into ... files as a source of data when asked to do a Scan. ===Configuration=== Both systems are configured ...
2K - last updated 2004-01-17 17:47 UTC by
SctWeekTechnicalMeetingDec2003
I am proposing a technical meeting amongst the developers to discuss in detail what needs to be done ... === * Speed, more complex tests * Raw data scans === ArchivingService === * Speed, direction * ...
1K - last updated 2003-12-08 17:29 UTC by
SettingUpDaqHardware
Instructions from JohnHill... There have been several occasions over the last couple of years where during ... only forget to change it again later!). 5) "scanvme" is a useful tool in the DataFlow suite - typically ... The default mode is to scan in A32D32 in 0x10000 steps - it should give a ...
1K - last updated 2005-03-24 01:22 UTC by
SlopesOnBarrelThree
The NPtGainTest produces noise, offset and gain channel by channel. Looking for systematic slopes across ... chips on run 2172 scan 3. ===Definition=== slope = average change per ...
3K - last updated 2005-02-12 23:43 UTC by
SoftwareTests
This is a list of the test systems and so on used to test the software. ===SystemTests=== SystemTests ... to talk to hardware, and when asked to do a Scan, returns raw data from SCTDAQ runs. It is useful ...
1K - last updated 2004-07-02 16:11 UTC by
StrobeDelayTest
Scans the delay of the injected calibration charge relative to the trigger, to find the peak of the front ...
1K - last updated 2006-01-07 10:23 UTC by
SynchTriggerNoise
In the SynchTriggerNoise test, a trigger is sent at the same time to modules. An analysis for this data ... be fixed now, but there is a new problem: the scan dosent run. See also SynchTriggerNoiseDebugging ... Output from the complete B6 scan is in this file [http://www-pnp.physics.ox.ac.uk/~barra/WikiPlots/CrateServerOutputSynchTrigs.out] ... to be working correctly for both cal and non-cal scans, as well as for SynchTrigger. :) </pre> ... read out the histogram at the end of the scan, so all histo information is garbage (and the ...
2K - last updated 2005-09-15 22:21 UTC by
SynchTriggerNoiseDebugging
==Alan's findings as of 12/7/05== One's TIM needs to be set up as described in http://www.hep.ucl.ac.uk/atlas/sct/tim/. ... HV at 20 V (i.e. relatively high occupancy) scan.tim=1, scan.nth=15, single L1A, Qth=0.8fC **100 ... 1 Hz reset - ran OK. At the end of a working scan as above, but with 150V HV and 1 Hz reset we get: ... proc time: 15 Events recvd: 136666 Checking TIM scan complete </pre> Having fixed TIM problem, ... obvious - distSlave was not set to 0 for this scan in Release4-upwards :( With this fixed it also ...
5K - last updated 2005-07-12 16:36 UTC by
SystemPerformance
This page describes how to get the most out of SctRodDaq.... ==General Setup== Typically, all processes ... update as things change! * Fitting a threshold scan takes about 0.3s/module * Archiving raw data takes ... takes about 0.8s/module for a large (eg NMask) scan dropping to 0.3-0.4s/module for a typical threshold ... scan. * A scan takes about 6 minutes for a fully populated ... problems is in the AnalysisService (as multiple scans are composed into a test there), but it should ...
3K - last updated 2005-01-04 11:10 UTC by
SystemTests
This is a list of comments/notes from my testing of SctRodDaq using the SystemTests stuff. * Using the ... the FittingService hung after having done 980 scans. Not sure why. It looked like it might have been ... worked correctly and is did another 1000 scans without problem. ** I have come across this problem ... again whilst testing the Trim Test. After 1316 scans the FittingService hung. I think there is some ... is pointed at the EventData IS server and the RawScanResult files are inserted. <pre> System.out.println("<> ...
2K - last updated 2007-12-14 15:52 UTC by
TApi
A ROOT library providing access to the SctApi. This is by far the easiest way to do low level debugging. ... There are many TApiMacros which set up scans. Providing debug information for a histogram: ... in MDSP control register tapi.setDebugOption("scan_auto_stall"); tapi.standardRegisterDump(0, 0, ... 0); // Assuming on the first ROD tapi.doScan(scan); tapi.standardRegisterDump(0, 0, 0); tapi.debugStepHistogram(); ...
1K - last updated 2004-07-28 15:09 UTC by
TApiMacros
There are lots of TApi macros: init.cxx and destroy.cxx are to be used as rootlogon and rootlogoff. Functs.cxx ... functions described in TApiFuncts. Some do scans: * <b>3pt</b>: A three point gain ... <b>fullBypass</b>: Do a full bypass scan * <b>nmask</b>: Standard nmask scan ... * <b>noise</b>: Noise scan * <b>nonLinear</b>: Test variable ... * <b>threshold</b>: Threshold scan * <b>timeFull</b>: Template for timings ...
1K - last updated 2004-07-28 15:29 UTC by
Test
Various different tests are be applied to sct modules during assembly, macro-construction and at CERN. ... the test. A [[Test]] consists of one or more [[Scan]]s. The typical life-cycle of a [[Test]] is as ... of the correct type, and creates one or more [[Scan]]s to be done by the SctApi. * each module produces ... one <CDoc SctData::RawScanResult> object per scan which may be fitted ... FittingService to produce a <CDoc SctData::FitScanResult>. * the AnalysisService collects together ...
1K - last updated 2008-05-26 12:45 UTC by
TestData
TestData is a class defined as part of ControlData and has the following [[ISattributes]] <pre> ... in which this Test occurred" ----- name : "nScans" type : "u32" range : "" is multi value : "No" ... is direct : "Yes" description : "The number of scans in this Test" ----- name : "startScanNumber" ... "No" is direct : "Yes" description : "The first scan number in this Test" ----- name : "testVariable" ... : "Corresponds to one of the variables in sctScans.h" ----- name : "testPoints" type : "double" ...
2K - last updated 2005-11-01 23:05 UTC by
Testing-2005-11-03
Part of [[AlansSr1Tests]] ==To Test== Peters error code was tested yesterday without errors - all ok. ... I take it out? (18:54:35) PeterP: if you want scans to run, yes! (18:54:48) Alan: ok (19:00:05) PeterP: ... on. If have to send HR more than 10 times, abort scan. (19:03:12) Alan: ok (19:03:24) PeterP: Present ...
1K - last updated 2005-11-03 18:11 UTC by
TestingSchedule
Notes on things that need testing, and results thereof. == Endcap cosmics == * Possibly try Coral backend ... * Check dual port configuration sending * Timing scans ** ie scans in which the tx timing changes, and ... errors before reading out ** What kind of timing scans? fine/coarse tx? With ROD busy override? * Auto ... writing at end of run ** OK * 2D BOC scans ** Success? == Barrel in pit == Mainly Multi-crate ...
1K - last updated 2006-11-03 15:07 UTC by
TestingSctRodDaq 4 1
I tested SctRodDaq_4_1 in pcei.hep.phy.cam.ac.uk:/usera/sctrod/testing_4_1 This <a href="http://www.hep.phy.cam.ac.uk/atlas/macro-assembly/DAQ/SctRodDaq_4_1/BinaryRelease.tar.gz">BinaryRelease</a> ... this after being confused for a long while by a scan-time error message saying "No modules to scan". ...
3K - last updated 2005-02-21 16:38 UTC by
TestingSctRodDaq 4 2 RC1
I tested SctRodDaq_4_2_RC1 in pcei.hep.phy.cam.ac.uk:/usera/sctrod/testing_4_2_RC1 The binary release ... this after being confused for a long while by a scan-time error message saying "No modules to scan". ...
4K - last updated 2007-04-23 09:22 UTC by
TestingSctRodDaq 4 3 RC1
See also [[SctRodDaqRelease4.3]] and [[TestingSctRodDaq_4_3_RC2]]. ----- I tested SctRodDaq_4_3_RC1 in ... 4_3_RC1, I find that I can still do an RxThresh scan, but an NMask halts on bin 10 of 128 for an eternity. ...
1K - last updated 2007-04-23 09:22 UTC by
TestingSctRodDaq 4 3 RC2
See also [[SctRodDaqRelease4.3]] and [[TestingSctRodDaq_4_3_RC1]]. == TESTING == Installed source release ... many defects. Occupancy completed, though 'Scan aborted (histo stalled)' mrs at end of test and ... data looks rubbish (no threshold scan data below -20mV, see picture below) SynchTrigger ... the origin of the error, either here or in the ScanErrors.txt file (I probably need training at error ... 0): Event 24464 Bin 8 You are about to get the 'Scan aborted (histogramming stalled)' message. Histogram ...
1K - last updated 2005-12-19 14:03 UTC by
TestsForBarrelSix
==Barrel 6 Routine Assembly Tests== General - 16 bit histograms would speed up r/o time for most of these. ... statistics.) ===Select 0=== * RX threshold Scan ** 10 -> 250, step 10 * NMask ** 32 ->128, ... not routinely''' * need at least one threshold scan to look for slope variations ** [[Alan]] reminds ... will unless modified. * suggest 2fC threshold scan, same conditions as 3PG * need to change select ... '''recording''' what options were set for that scan. * note to self - if one gets a scanrequest, then ...
2K - last updated 2005-02-23 14:26 UTC by
ThreePointGainTest
Threshold scan is performed for injected charges of 0.5, 1.0 and 1.5fC. In each ase, a complementary ... a linear fit to the fit results for the three scans. The output noise from the scan taken with 1.0fC ...
1K - last updated 2005-08-02 11:50 UTC by
TimingInSCT
This page is closely related to TimingIn == TimingScan GUI == The TrimingScan gui allows you to scan ... count, min L1ID and max L1ID. The gui can scan manually (the gui manually scans TX coarse delay ... each module) or in rod histogramming mode (the scan is performed by the SctApi and a TestData object ... is published similar to Alans TimingScan beanshell script). Running the gui <pre> ... Start a run,then: TimingScan startDelay endDelay binSize <rod histogramming ...
1K - last updated 2006-05-05 13:26 UTC by
TrimTarget
TrimTarget is the threshold in mV to which a module has been trimmed, typically for 1fC injected charge. ... The scanned variable ST_TTHR may be used to vary the threshold ...
1K - last updated 2005-02-01 14:41 UTC by
getDBfiles
From DaveRobinson 's e-mail: The full list of options for 'java ProdDatabase/getDBfiles' is listed at ... only data for the given RunNumber ** '-s ScanNumber' to download only data for the given ScanNumber ... Noise ** 9 - TimeWalk ** 10 - LongTerm ** 11 - IVscan ...
1K - last updated 2005-03-31 10:51 UTC by
onRODhist
This page describes how to run on-ROD histograms in physics mode. From Bruce: <pre> First run tapi. ... Set up the scan: 1) Have a look through testAsyncScan.cxx and ... it looks OK. The only important things are: a) TScanDef noise; // Create a scan b) noise.tim = 1; // ... = 15; // Don't histogram everything d) TScanMonitor *monitor = tapi.startAsyncScan(noise); ... 2) Load it .L testAsyncScan.cxx 3) TScanMonitor *monitor = testAsyncScan(); ...
1K - last updated 2005-12-06 13:50 UTC by