AJB
see AlanBarr ...
1K - last updated 2005-12-13 20:34 UTC by
Alan
Full name AlanBarr ...
1K - last updated 2003-11-21 18:05 UTC by
AlanBarr
I have been working on various parts of SctRodDaq, including the AnalysisService, FittingService, ArchivingService ... are on http://www.hep.phy.cam.ac.uk/people/barr.html My [[Jabber]] name is ajb57@amessage.info ... My to do list is on AlanBarrToDo Upstairs office 01865 273362 More often at ...
1K - last updated 2005-10-20 09:33 UTC by
AlanBarrDone
===Really finished=== * RxDelay based on sendid ** [[ChrisLester]] has done this *Cut-down version of ...
1K - last updated 2005-01-28 15:49 UTC by
AlanBarrToDo
== Top Priorities == * Comparisons of data should be to reference set rather than to "ideal case" * Monitoring ... and tested on modules in the box Analysis of Barrel 3 * Double Trigger Noise -- [[Bilge]] doing ... * Slopes in gain, offset, noise -- See SlopesOnBarrelThree ** Check error levels and "problem" flag ... ===Older stuff== Pre 2005 moved to AlanBarrDone ...
1K - last updated 2006-07-07 22:25 UTC by
AllBarrels
There are 4 SCT Barrels: [[Barrel3]] [[Barrel4]] [[Barrel5]] [[Barrel6]] For the mapping file click on ... Barrel_3] [http://www.hep.phy.cam.ac.uk/~robinson/B4_mapping.xls ... Barrel_4] [http://www.hep.phy.cam.ac.uk/~robinson/B5_mapping_original.xls ... Barrel_5] [http://www.hep.phy.cam.ac.uk/~robinson/B6_mapping.xls ... Barrel_6] For information about data from the barrels ...
1K - last updated 2007-10-04 08:51 UTC by
BOC
The BOC (or Back Of Crate) module is part of the SctHardware. It is the primary data and control interface ... between the modules (in both the Barrel and the End-Caps). As such, it performs the ...
2K - last updated 2005-08-10 11:19 UTC by
Barrel3
Part of [[AllBarrels]] Barrel3 is now at [http://atlas-id-sr1.web.cern.ch/atlas-id-sr1/SCT-integration.htm ... SR1], Cern. [[Barrel3Analysis]] from cold runs after barrel completion ... is still going on. The list of features on Barrel3 are at [[Barrel3Exceptions]] ...
1K - last updated 2005-03-08 18:30 UTC by
Barrel3Analysis
There are several people doing analysis of [[Barrel3]] on data taken during assembly, and during warm ... logbooks] * List of [[Barrel3Exceptions]] === Tools etc === *[[Dave]] and ... discussions [http://www-pnp.physics.ox.ac.uk/~barra/WikiPlots/Notes_of_B3_discussion_19_01_2005.doc ... 19-Jan-2005] [http://www-pnp.physics.ox.ac.uk/~barra/WikiPlots/Notes_of_B3_discussion_2_2_2005.doc ... * Peter's [http://www-pnp.physics.ox.ac.uk/~barra/WikiPlots/B3coldtest.doc Cold test document] ...
1K - last updated 2005-05-04 12:17 UTC by
Barrel3Exceptions
==The definitive list of known exceptions== * lmt01 Z+6 20220330200024 ** No redundant TTC (from harness ... <select>1</select> </pre> Barrel3.xml <pre> <channel id="XX" MUR="3124" ... <select>1</select> </pre> Barrel3.xml <pre> <channel id="XX" MUR="3030" ... ** For this module, use VCC 3.7V and VDD 4.1V. Barrel3.xml <pre> <channel id="XX" MUR="3117" ... 20220330200292 ** For this module, use VCC 3.7V. Barrel3.xml <pre> <channel id="XX" MUR="3117" ...
1K - last updated 2006-03-28 08:38 UTC by
Barrel3HardwareConfig
Part of [[OxfordSetup]] Specific to the tests of Barrel 3, the crates have been cabled up according to ... This mapping is also reflected in the file Barrel3full.xml in this directory. Here is the rack ... Empty C-6 C-3 C-7 ROD-1 S = Sector Crate C = Barrel Crate PS = Power Supply Dummy = Dummy load box ...
3K - last updated 2005-03-10 14:09 UTC by
Barrel4
Testing at oxford started 4 July 2005. Part of AllBarrels. See [[Barrel4Exceptions]] and also [[Barrel4ColdTest]] ... [[Barrel4Analysis]] is now under way. ...
1K - last updated 2005-08-09 23:03 UTC by
Barrel4Analysis
=== Log books === * Electronic [http://www-pnp.physics.ox.ac.uk/~daquser/cgi-bin/sctroddaqsummary.cgi ... logbooks] * For module funnies see [[Barrel4]] * For a short list of good cold runs, see ... [[Barrel4ColdTest]] === Tools etc === * The [http://www-pnp.physics.ox.ac.uk/~daquser/cgi-bin/sctroddaqsummary.cgi ...
1K - last updated 2005-08-10 13:10 UTC by
Barrel4ColdTest
<b>MoPS Exceptions</b> * LMT04 Z-2 VVCSEL 5.0V * LMT04 Z-3 VVCSEL 5.0V * LMT04 Z-4 VVCSEL ...
4K - last updated 2005-09-12 10:13 UTC by
Barrel4Exceptions
LMT2 Z+4 Link 0 DEAD VCSEL 1/2 normal current (failure of ileda?) * was later replaced by modifed module ... meant for redundant TTC (@ Z-5) See also [[Barrel4ColdTest]] MissingLinks: a complete list of ... and the locations of modified modules for all barrels is available here. ...
1K - last updated 2009-08-11 12:58 UTC by
Barrel5
Part of AllBarrels List of [[Barrel5Exceptions]] ...
1K - last updated 2005-05-02 22:33 UTC by
Barrel5Exceptions
Features on [[Barrel5]] ==Modules which were replaced== * LMT02 Z-4 20220380200044 has been replaced ... and the locations of modified modules for all barrels is available here. ...
1K - last updated 2006-03-31 15:42 UTC by
Barrel6
Part of AllBarrels and at OxfordSetup [[Barrel6Exceptions]] list is now being compiled. [[Barrel6ColdTest]] ... page shows the newer finds. [[Barrel6Analysis]] is soon to follow. ...
1K - last updated 2005-05-27 00:52 UTC by
Barrel6Analysis
=== Log books === * Electronic [http://www-pnp.physics.ox.ac.uk/~daquser/cgi-bin/sctroddaqsummary.cgi ... logbooks] * For module funnies see [[Barrel6]] === Tools etc === * The [http://www-pnp.physics.ox.ac.uk/~daquser/cgi-bin/sctroddaqsummary.cgi ... DCS]. The root trees with both Power Supply ... sensors were located on the inner side of Barrel 6. The last one, namely the Ambience Humidity ... wall of the cold room. The four sensors on the barrel are not calibrated, therefore the absolute values ...
1K - last updated 2005-08-12 15:42 UTC by
Barrel6ColdTest
A summary of [[Barrel6]] features applicable during the cold test... == B6 Z- ALONE == *NOT TESTED: ** ... thresholds - so we'll leave this one on the barrel. *ADJUSTMENTS: ** LMT20 Z+1 set VVCSEL 3.0V ... *LGS (Large Gain Spread) candidates from (half barrel) 3PG tests: **LMT02 Z+2 20220170200879 chip ...
5K - last updated 2005-10-04 15:21 UTC by
Barrel6Exceptions
Features on [[Barrel6]] ==Executive Summary: Modules with Major Faults== These are the modules which, ... from the database gives a TestResult instead? == Barrel6ColdTest == See [[Barrel6ColdTest]] for details... ... and the locations of modified modules for all barrels is available here. ...
1K - last updated 2006-03-29 12:05 UTC by
BarrelConfig
Part of [[OxfordSetup]] Here we describe the format of pre-defined files that are used in SCT DAQ. These ... on this machine. Modules are mounted on the barrel in rows of 12. Each row is divided into two ... groups of 6 modules, one on the Z- end of the barrel and the other on the Z+. Each half-row is serviced ... Z+. All the configuration files for a particular barrel are stored in a single directory. For example, ... the configuration files of [[Barrel3]] can be found in ~/BarrelConfig/Barrel3. The ...
4K - last updated 2005-07-14 11:25 UTC by
BilgeToDo
== In Progress== ?? == DONE == Thesis Debugging ROS issues during physics running Get TDC/ADC setup to ... Bookkeeping page is the new one. wrote report on Barrel3Analysis wrote [[OPETool]] ie. OccupancyPerEvent ...
1K - last updated 2007-05-13 19:44 UTC by
BugFixesForOmniMigration
===Require attention=== * [[Alan]]: There's a line in AnalysisService/src/StrobeDelayAlgorithm.cpp that ... ) **[[PWP]]: There is an issue here. For 98% of barrel modules, 0.4 is the correct value to use for ... could be that we donlt use any of those on the barrels, but we should perhaps be ready with a solution ... : Unrecognised testname: FullBypassBarrelTest </code> ** Noted by [[Alan]] 5/8/04 ...
1K - last updated 2005-02-14 18:01 UTC by lapnat.physics.ox.ac.uk
ChipConfiguration
This is the ABCD config register, each number is a field in the register as below (number on the right ... for examples of setting up the bypass for barrel modules. ...
1K - last updated 2008-03-03 13:27 UTC by
ChipCounterTest
Part of SctRodDaq The [[ASIC]], ABCD3T chip has 4 bits of Level1 counter and 8 bits of Bunch Crossing ... This plot was "generated". This module from Barrel 6 has otherwise good counters. By not sending ... after SEU (single event upsets). One module on Barrel 5 and one module on Barrel 6 with counter errors ...
1K - last updated 2005-07-15 10:07 UTC by
CodeDocumentation
The doxygen documentation of the SctRodDaq code can currently be found at [[Docs]] or alternatively at ... http://www-pnp.physics.ox.ac.uk/~barra/ . The c++, java and idl code are all accessible ...
1K - last updated 2004-07-08 11:31 UTC by
ConfigurationPerformanceImprovements
===First attempt=== [[Alan]] writes... So far I've done * SctApi keeps a cache of all ROD banks (lazy ... Here is the [http://www-pnp.physics.ox.ac.uk/~barra/WikiPlots/CacheDiffConfigs.txt difference] between ... DSP code. * [http://www-pnp.physics.ox.ac.uk/~barra/WikiPlots/DougsChanges Douglas's changes] which ... * [http://www-pnp.physics.ox.ac.uk/~barra/WikiPlots/BrucesReply Bruce's reply] ===Background=== ... [http://www-pnp.physics.ox.ac.uk/~barra/WikiPlots/ChatWithBruce.html Alan's chat with ...
1K - last updated 2005-03-03 15:03 UTC by
DaqMeetingJune2005
For agreed actions see [[DaqMeetingJune2005ActionList]] ===Many-module "test" system(s)=== *Short-term: ... want/need. What is possible? **Intermediate: *** Barrel sector? Refurbished? **Longer term: *** spare ...
2K - last updated 2005-06-30 08:48 UTC by
DaqMeetingJune2005ActionList
==Available test systems== ====Short-term test systems==== * [[Barrel5]] - the afternoon and evening ... may also be an opportunity to test the DAQ on [[Barrel4]] at Oxford if the mounting and testing goes ... quickly. ====BarrelSector==== The BarrelSector needs a refurbished ... those with known problems taken off other barrels * This requires: ** Harnesses to come from ... etc. * Module mounting only to proceed after [[Barrel4]] is completed * Host institution tbd. * Time-scale ...
3K - last updated 2005-09-14 20:11 UTC by
DocumentationForOmniMigration
The following documentation bears some relation to the OmniMigration programme: * AcronymSoup * SctDaqHowto ... is useful to remember /atlasdata/nfsroot73/home/barra/new-online/CorbaTests/ ! * Configuration Database ...
1K - last updated 2008-05-29 09:42 UTC by
DoubleTriggerAnalysis
This page documents the preliminary analysis of DoubleTriggerNoise data from Barrel 3, 4 and 6 cold runs ... and Barrel 5 warm runs ==Barrel 3 == Part of [[Barrel3Analysis]]: ... [http://www-pnp.physics.ox.ac.uk/~demirkoz/Barrel3_DT Barrel3_DT] Lets define a parameter peak. ... For the distribution of peaks over all of Barrel 3 chips, take a look at [http://www-pnp.physics.ox.ac.uk/~demirkoz/DoubleTrigger/histdouble.eps ... Unfortunately, we can not check this with Barrel 3. However, we looked for optopackages which ...
6K - last updated 2007-04-12 20:41 UTC by
DoubleTriggerNoise
The purpose of the DoubleTriggerNoise test is to identify problematic electrical and optical pickup during ... contains the preliminary analysis of Barrel 3 cold run data. ...
1K - last updated 2005-05-26 14:03 UTC by
ExampleConfigurationFile
There are a few example configurations in the distribution: * sctConf/exampleRod.xml ** This also provides ... what's in a configuration file is explained at BarrelConfig and ModuleConfig ...
1K - last updated 2005-11-18 23:14 UTC by
FittingServiceFunnies
== AnalysisService == [http://www-pnp.physics.ox.ac.uk/~barra/WikiPlots/3024.5.20220170100002_channelRC_1.ps ... yet. [http://www-pnp.physics.ox.ac.uk/~barra/WikiPlots/Fits.gif Fits] [http://www-pnp.physics.ox.ac.uk/~barra/WikiPlots/Raw.gif ... To: Peter Phillips <AGENT>, Alan Barr <CLUB> Hi, I've just discovered something ...
2K - last updated 2005-02-28 17:37 UTC by
FunctionalOverview
Tests are written up in [http://hepwww.rl.ac.uk/atlas-sct/documents/pro/Electrical_Tests_338.pdf Peter's ... document] and [http://www-pnp.physics.ox.ac.uk/~barra/Alan-Barr-NSS-Proceedings.doc Alan's IEEE proceedings] ...
1K - last updated 2005-09-14 17:14 UTC by
GeneralDiscussion
TriggerFlow ---- I think I'll add a Oxford link or two to the UserStories [[Alan]] ---- This is a page ... line. ---- Adding a page for ChrisLester and AlanBarr on the subject of OmniMigration. [[Alan]] ---- ...
1K - last updated 2006-03-30 09:13 UTC by
HistogrammingProblemsInPhysicsMode
While trying to run the ( version 1.1.2.5 of ) physicsModeTimingScan.java in TDAQ14_BRANCH under SctApiIPC/scripts, ... H8Testbox -- they have higher occupancy from the barrel modules, btw... For the CrateServer log, look ...
1K - last updated 2006-05-05 14:35 UTC by
IS
IS is short for Information Service. It is part of the Atlas OnlineSoftware, and is used for sharing ... sct > is_ls -p SCT_0107 --server PMG -r SCT_Barrels_TTC_RCD --print-name --print-value Server "PMG" ... contains 1 object(s): PMG.SCT_Barrels_TTC_RCD <1/6/07 15:09:16.499413> <PMGPublishedProcessData> ... handle pmg://sbc-sct-tcc-01.cern.ch/SCT_0107/SCT_Barrels_TTC_RCD/9 pid 24860 partition SCT_0107 host ... sbc-sct-tcc-01.cern.ch app_name SCT_Barrels_TTC_RCD </pre> To see an example of putting ...
2K - last updated 2008-07-17 12:50 UTC by
Jabber
Jabber is an open instant messaging system. * Users run client applications that connect to a server. ... ===Primary contacts=== *ajb57@amessage.info AlanBarr *lester@amessage.info ChrisLester *pwp451@jabber.org ...
1K - last updated 2006-07-12 07:57 UTC by
JanuaryTestingWeek
==Aim== To find out any remaining problems with SctRodDaq which could compromise our ability to do stand-alone ... ***Full mode now ready for analysis ==Tests with Barrel Sector (15 modules)== <i>To do during ... sequence as described above. ==Tests with either Barrel Sector or H8 testbox== <i>To do during ... issues with link masking ** With the Barrel sector, 10 modules in one group can cause the ...
1K - last updated 2006-03-31 11:28 UTC by
MUR
Acronym for Minimum Unit of Readout. This basically corresponds to a harness in both the Barrel and Endcap. ...
1K - last updated 2003-12-19 16:16 UTC by
MarkSpaceRatioTest
One of the BocSetupTests. The idea behind this test is to set up the TX duty cycle (Mark:Space ratio) ... shown below... http://www-pnp.physics.ox.ac.uk/~barra/WikiPlots/MarkSpacePublicity.png [[Alan]] ...
1K - last updated 2005-03-22 22:09 UTC by
Matrix
Matrix is part of the cooling and laser interlock systems. Its purpose is to send "enable" signal to ... click on file which you want to edit, i.e. for Barrel6 C://SCT_DCS/Imatrix/test_matrix_B6/master_zminus.vhd ... (or master_zplus.vhd for Barrel 6) * Start the ispVM system from the start menu ...
1K - last updated 2005-03-30 09:40 UTC by
Meetings
Please keep a list of meetings here. We are now using [[Jabber]] for online discussions and low-level ... [[Meeting30October2007]] == Old Meetings == * [[Barrel6Analysis]] * [[DaqMeetingJune2005]] * [[Barrel3Analysis]] ...
1K - last updated 2007-10-29 08:33 UTC by
MergingPageForNewPrimitives
9th May 2005 * New primitives working with c-code and assembler * Some problems with work-arounds KnownBugsInDspCode ... * Doing a merge of BARR_PRIOR_TO_NEW_PRIM_BRANCH to BARR_NEW_PRIM_NEW_FUNCTIONALITY_20050504 ... into BARR_NEW_PRIM_MERGE_POINT_B N.B. RodDaq code and 11 ... for using this. http://www-pnp.physics.ox.ac.uk/~barra/WikiPlots/prim_merge.png [[Alan]] ...
1K - last updated 2005-05-09 11:26 UTC by
MergingPagesForOmniMigration
(See also OmniMigration) Summary Picture: http://www.hep.phy.cam.ac.uk/~atlasdaq/images/MergePic.multicrate.png ... incorporating all changes introduced during barrel 3 assembly at Oxford. (February 2005) == Described ...
1K - last updated 2005-03-09 16:49 UTC by
MissingLinks
This page aims to give the definitive overview of known faults with the optolinks for all barrels. For ... history, see [[MissingLinksAtOxford]] ==Barrel 3 (No modified modules)== DATA links * LMT28 ... Electrical faults * lmt22 Z+3 Vdd sense error ==Barrel 4 (3 modified modules)== DATA links * LMT02 ... has zero pin current in the pit 10/08/09 :-( ==Barrel 5 (3 modified modules)== DATA links * LMT19 ... has good pin current in the pit 10/08/09 :-) ==Barrel 6 (5 modified modules)== DATA links * LMT08 ...
1K - last updated 2009-08-11 13:18 UTC by
MissingLinksAtOxford
This page aims to give the definitive overview of known faults with the optolinks for all barrels at ... list. For the newest list, see MissingLinks. ==Barrel 3 (No modified modules)== DATA links * LMT28 ... No redundant TTC (from harness test) ==Barrel 4 (3 modified modules)== DATA links * LMT02 ... pin current. Passes diode test. Use SELECT=1. ==Barrel 5 (3 modified modules)== DATA links * LMT19 ... link1 low output: OK with RX threshold of 80 ==Barrel 6 (5 modified modules)== DATA links * LMT08 ...
1K - last updated 2007-03-18 18:07 UTC by
ModuleConfig
Part of [[BarrelConfig]] The module configuration files are downloaded by the command getDBfiles, which ... When a modified module is used (ie. on Barrels 4,5 and 6), the last 5 bits of the configuration ... a modified module was not available (ie. for [[Barrel3]] ) or if there are future failures in reading ... Chris: <pre> I have been told that the barrel inter-chip links are always a sub set of the ... endcap inter-chip links, so: (*) a barrel chip config will always "work" on an endcap ...
1K - last updated 2008-09-16 10:23 UTC by pcatsct06.cern.ch
Nuno
Also known as Nuno Barros Spends time working on [[CDItesting]] [http://nfiuza.home.cern.ch/nfiuza/ Homepage] ...
1K - last updated 2005-11-09 16:38 UTC by
OPEAnalysis
Part of [[Barrel3Analysis]] OPEAnalysis analyses data from the [[OccupancyPerEvent]] Data using [[OPETool]]. ... For the distribution of badness over all of Barrel 3 chips, take a look at [http://www-pnp.physics.ox.ac.uk/~demirkoz/OpeData/histbad.eps ... of warm runs will follow shortly. == Changes for Barrel 6== Barrel 6 contains lots (and lots) of modules ... Here is a list of OPE related Badnesses on Barrel6 RawScanResult.5874.0.20220380200057.gz : You ... and the bad OPE was not reproducible. == Barrel 4 summary == 9459.7.20220170200659 chip S2 : ...
1K - last updated 2005-08-11 12:20 UTC by
OPETool
OPETool is an analysis tool for OccupancyPerEvent or OPE data which is in Release4.0. OPETool takes in ... a Binomial distribution. The analysis results of Barrel 3 cold run can be found at [[OPEAnalysis]]. ...
1K - last updated 2005-02-01 17:02 UTC by
OnlineSoftwareVersion
Below describes moving from 00-19-01 to 00-20-00. See TdaqOneSixNotes for moving to 01-06-00. Conversation ... not to change anything possibly till the next barrel... (14:19:31) bjg1492: Fixing in what way? (14:19:51) ...
1K - last updated 2006-09-07 09:19 UTC by wwwcache2.rl.ac.uk
OpticalConfig
Part of [[OxfordSetup]] For the Fibre-optic communications there are some conventions. The fibres which ... or North Table : 1-16 1-32 South Table: Z- Barrel 3: 17-32 33-64 for additions (ie. Barrel6) 33-44 ... 65-88 Z+ Barrel 3: 45-60 89-120 for additions (ie. Barrel6) ... 61-72 121-144 </pre> Note that Barrel 3 has 32 rows, corresponding to 32 TX fibres ...
1K - last updated 2005-03-23 11:51 UTC by
Overview
This Wiki is mostly out of date, see the SCT TWiki pages for more up to date info. Still most important ... Combined run]] * [[MissingLinks]] * [[AllBarrels]] * [[UsefulPhoneNumbers]] * The TRT DAQ Wiki ...
2K - last updated 2009-01-14 14:12 UTC by
OxfordSetup
For information about the 4 barrels, see AllBarrels For [[Barrel3]] testing, we used SctRodDaq version ... 3. For [[Barrel6]] and [[Barrel5]] testing, we are using SctRodDaq ... is used. For setting up the readout of the barrels, take a look at [[BarrelConfig]] as well as ... programming. The hardware documentation for Barrel 3 is at [[Barrel3HardwareConfig]] and at [[PowerSupplySystemSetup]]. ... [[Barrel3Analysis]] contains the offline analysis of ...
1K - last updated 2005-05-06 17:14 UTC by
PMG
[http://rd13doc.cern.ch/Notes/081/ug.htm Some PMG Docs] Example of extracting information from IS (eg ... sct > is_ls -p SCT_0107 --server PMG -r SCT_Barrels_TTC_RCD --print-name --print-value Server "PMG" ... contains 1 object(s): PMG.SCT_Barrels_TTC_RCD <1/6/07 15:09:16.499413> <PMGPublishedProcessData> ... handle pmg://sbc-sct-tcc-01.cern.ch/SCT_0107/SCT_Barrels_TTC_RCD/9 pid 24860 partition SCT_0107 host ... sbc-sct-tcc-01.cern.ch app_name SCT_Barrels_TTC_RCD </pre> ...
1K - last updated 2007-06-01 13:14 UTC by
PointOneDcs
==Point 1 DCS== ==PVSS Systems== SCS Host System Number System Name KVM Channel Status PCATLSCTSCS 20 ... may mask on/off a group of channels as follows "barrel|channel|0xHL|20" where H is a nibble representing ... H and L, 0 - off, 1 - on, 2 - am I bovvered? Barrel and channel are numbers. * From the "state transition" ... a group of channels OFF/STANDBY/ON as follows: "barrel|channel|state|20" where state 0 - off, 1 - on, ... you probably won't need to know more than this. Barrel and channel are numbers. * For both of the above ...
1K - last updated 2007-01-31 16:07 UTC by
Point 1 Setup
see also PointOneDcs == Introduction == All DAQ related servers, SBCs and ROSs are in USA15. We have ... Servers 1,2,3,4 and 9 are generally used for the barrel DAQ. Servers 5 and 6 are used for endcapC DAQ. ... and associated ROSs, see the sections below. == Barrel ROD crates == The shows which crates service ... which barrel modules, when viewed from the front of the crates: ... ----- </pre> == Working with the Barrels == The barrel DAQ is an SLC4 system running ...
8K - last updated 2008-09-19 08:18 UTC by
PreparationsForFullBarrel
* MultiCrateRunning using RodCrateDaq ** Perhaps ChrisLester can take this over? * BinaryOverVme ** did ...
2K - last updated 2005-02-15 09:59 UTC by
Releases
The current release of SctRodDaq is probably a version just off the top of the list below. *[[SctRodDaqRelease4.3]] ... - deprecated *[[SctRodDaqRelease3.01]] -- "Barrel3" bug-fix release *[[SctRodDaqRelease3.0]] -- ... "Barrel3" release *[[SctRodDaqRelease2.1]] -- deprecated ...
1K - last updated 2008-04-14 13:59 UTC by
SctApiSplit
== Methods at Crate level only == Mostly debug or access to low-level features not used in normal Calibration ... unsigned long mid); unsigned long findBarrelModule(in unsigned long barrel, in unsigned long ... row, in short number); void convertToBarrelModule(in unsigned long mid, out unsigned long ... barrel, out unsigned long row, out short number); unsigned ... though it might turn out to be true for the barrel is almost certainly not true for the endcaps, ...
6K - last updated 2005-02-25 12:53 UTC by
SctApiToDo
See SctApiTests for things that should be checked every time. Add Slave single write to RODDiagnostics. ... up the slow config register ones? == SR1 (ie 4 barrels) == Multi-crate operation: * Integration with ...
4K - last updated 2007-04-17 16:33 UTC by
SctGui
SctGui is the primary user interface for SctRodDaq. It provides a graphical representation of the physical ... layout of the barrels and endcaps. The functionality includes: * ... of the current module configuration, for any barrel or endcap * invoking of test scans * display ...
2K - last updated 2006-08-30 10:08 UTC by
SctOnlineMonitoring
===Context=== The cosmics run with the barrel at SR1 has taught us more about the sorts of information ... if not by default, then upon request. ie. ROD/Barrel occupancy/error rates. ** AJB - suggestion for ... its source of configuration information. -- AlanBarr ...
1K - last updated 2006-07-13 11:10 UTC by
SctRodDaqPaper
List of exisiting resources & links == Official papers == * The Data Acquisition and Calibration ... * The barrel modules of the ATLAS semiconductor tracker. ... conference note: ** http://www.hep.ucl.ac.uk/~barr/sct/paper/ * Bruce's thesis: ** [http://www.hep.phy.cam.ac.uk/~atlasdaq/FilesForWikiDownload/bjg_thesis.ps.gz ...
2K - last updated 2008-07-28 09:07 UTC by
SctRodDaqRelease3.01
This page has not yet been written. In the mean time you had best look at the [[SctRodDaqRelease3.0]] ... know what is new in this release, petition AlanBarr, BruceGallop and/or PeterPhillips who I believe ...
1K - last updated 2006-01-19 14:31 UTC by
SctRodDaqRelease4
This release is the second major release for MacroAssembly and the [[SRBuilding]]. Lessons learned from ... a branch of CVS. Currently ChrisLester and AlanBarr working on this. See OmniMigration. **'''actually ...
2K - last updated 2005-02-14 12:09 UTC by
SctRodDaqReleaseCandidatesFor3.2
Oxford had many local modifications to their code as a result of barrel 3 assembly. Before integration ...
2K - last updated 2005-01-17 10:49 UTC by
SctRodDaqResponsibilities
For bug reports, comments etc, on any aspect of the SctRodDaq system, please contact the relevant expert(s) ... * GUI - Dave Robinson * Analysis - Alan Barr, Chris Lester, Bilge Demirkoz * Configuration ... Peter Phillips * SctApi - Bruce Gallop, Alan Barr, Peter Phillips, Chris Lester * ROD DSP Code - ...
1K - last updated 2007-04-26 13:33 UTC by
SlopesOnBarrelThree
The NPtGainTest produces noise, offset and gain channel by channel. Looking for systematic slopes across ... correlation [http://www-pnp.physics.ox.ac.uk/~barra/WikiPlots/slopes.ps plots] ===Suggested Ranges ... Slope=== *[http://www-pnp.physics.ox.ac.uk/~barra/WikiPlots/2172.3.20220170200008_Offset_1.eps ... worst case *[http://www-pnp.physics.ox.ac.uk/~barra/WikiPlots/2172.3.20220330200446_Offset_1.eps ... *[http://www-pnp.physics.ox.ac.uk/~barra/WikiPlots/2172.3.20220040200508_Offset_1.eps ...
3K - last updated 2005-02-12 23:43 UTC by
SoftwareDevelopers
The people responsible for the SctRodDaq software are (in no particular order): * JanetCarter * PeterPhillips ... * JohnHill * BruceGallop * AbdelAbdesselam * AlanBarr * BilgeDemirkoz * DaveRobinson * ChristopherLester ...
1K - last updated 2006-02-11 21:11 UTC by
Sr1Setup
==Overview== There are currently two main test systems in SR1: * H8 test box setup. Host machine srsctdaq1, ... ie can be switched on at short notice. The barrel sector is C3F8 chilled. Only trained cooling ... srsctdaq1 * /work/pcphsctr03 ** Used for the barrel sector system running pon pcphsctr05 * /work/pcphsctr04 ...
4K - last updated 2006-03-22 16:09 UTC by
StatusOfOmniMigration
See also OmniMigration for related topics. The following table should (approximately) represent the current ... - || - || should be unaffected || || SCT || AlanBarr || builds || - || - || need to valgrind check ... || builds || - || - || - || || sctConfIPC || AlanBarr || builds || - || - || RC needs to be added || ... up gui || untested || || SctService || AlanBarr || builds|| - || - || very little change || || ...
1K - last updated 2004-07-13 13:02 UTC by
SynchTriggerNoise
In the SynchTriggerNoise test, a trigger is sent at the same time to modules. An analysis for this data ... in this file [http://www-pnp.physics.ox.ac.uk/~barra/WikiPlots/CrateServerOutputSynchTrigs.out] The ... Fri, 4 Mar 2005 19:05:45 +0000 (GMT) From: Alan Barr To: Bruce Cc: Christopher Lester Subject: Trigger ... Wed, 13 Jul 2005 19:40:19 +0100 (BST) From: Alan Barr <barr@hep.ucl.ac.uk> Subject: Synchronous ... which is why Alan and Bilge had to use R3 for Barrel 6 cold. Now fixed in R4-updated too. Was fixed ...
3K - last updated 2005-09-15 22:21 UTC by
SynchTriggerNoiseAnalysis
Analysis of the SynchTriggerNoise == Analysis of SynchTriggerNoise data from Alan Phillips: == The Following ... reports for [[Barrel3]] and [[Barrel6]] have been corrected so they ... now consider the right number of triggers: *Barrel 3 [http://www.hep.phy.cam.ac.uk/~phillips/B3AnReportNEW.ps ... Occupancy for Cold runs 2177.5 and 2177.6] *Barrel 6 [http://www.hep.phy.cam.ac.uk/~phillips/B6AnReportNEW.ps ... Report on SynchTriggerNoise Occupancy] *Barrel 4 [http://www.hep.phy.cam.ac.uk/~phillips/Barrel4_Analysis.html ...
2K - last updated 2005-10-11 15:16 UTC by
SynchTriggerNoiseDebugging
==Alan's findings as of 12/7/05== One's TIM needs to be set up as described in http://www.hep.ucl.ac.uk/atlas/sct/tim/. ... ! Working in Release4-updated at Oxford on Barrel5 LMT02->05 Z-, upper crate (atlassbc2) Rod ...
5K - last updated 2005-07-12 16:36 UTC by
SystemPerformance
This page describes how to get the most out of SctRodDaq.... ==General Setup== Typically, all processes ... speeds, but this is a small effect for a whole barrel. A normal setup would have one, possibly slow, ...
5K - last updated 2005-01-04 11:10 UTC by
TdaqOneSixNotes
Issues that have cropped up moving to tdaq-01-06-00. == Getting things to compile == The main thing we've ... New database schema for new ROS with ROBINs: SCTBarrelSegment_ROSWithROBINs.data.xml * Updated database ...
1K - last updated 2006-10-05 09:25 UTC by
TestingSchedule
Notes on things that need testing, and results thereof. == Endcap cosmics == * Possibly try Coral backend ... end of run ** OK * 2D BOC scans ** Success? == Barrel in pit == Mainly Multi-crate * Analysis on different ...
1K - last updated 2006-11-03 15:07 UTC by
TestingSctRodDaq 4 1
I tested SctRodDaq_4_1 in pcei.hep.phy.cam.ac.uk:/usera/sctrod/testing_4_1 This <a href="http://www.hep.phy.cam.ac.uk/atlas/macro-assembly/DAQ/SctRodDaq_4_1/BinaryRelease.tar.gz">BinaryRelease</a> ... of realising that two of the changes were embarrasing (the default values of DF_INST_PATH and TDAQ_INST_PATH ...
5K - last updated 2005-02-21 16:38 UTC by
TestsForBarrelSix
==Barrel 6 Routine Assembly Tests== General - 16 bit histograms would speed up r/o time for most of these. ...
3K - last updated 2005-02-23 14:26 UTC by
TimingIn
To measure the phase of the 40Mhz clock with respect to the cosmic trigger look at this page: PhaseMeasurement ... patch fibres and the length of the fibre on the barrels. Tony Weidberg has provided a very detailed ... of all the different harness types on the barrels (there are 46 different types of "fibre stacks" ... to travel down a fibre. * Fibre-lengths on the barrels: Known to mm-accuracy from file provided by ... Tony Weidberg. * Fibre-lengths from BOC to barrel: Not well known. Assumed to be equal for all ...
2K - last updated 2008-09-11 16:16 UTC by
Topical Discussions
Topical Discussion pages: * [[DraftConfigurationQuestionnaireAnswers]] * [[PreparationsForFullBarrel]] ... * [[TestsForBarrelSix]] * [[Barrel3Analysis]] * [[VME Hardware ...
1K - last updated 2006-06-06 09:08 UTC by
barr
Full name AlanBarr ...
1K - last updated 2003-11-21 17:31 UTC by
geometryDump
Useful for those wanting to find out what module was where without having the full xml parsing and config ... list> Parameters: sn : module serial number barrel : barrel number (barrel) row : row on barrel ... (barrel) disk : disk number (endcap) ring : ring on ... Sample output: <pre> $ geometryDump sn barrel row number #FILE PARSED: /home/daquser/BarrelConfig/Barrel3/Barrel3.xml ... #DATE/TIME PARSED: 2005-Feb-03 14:17:26 #sn barrel row number 20220330200034 3 0 -6 20220330200008 ...
1K - last updated 2005-02-03 14:18 UTC by
sctConfGUI
A partially complete configuration GUI. == The Main Panel == This has several buttons which provide access ... == Physical view == A view of modules on the barrel. This may have been superceded by the main SctGui. ...
1K - last updated 2004-01-06 15:56 UTC by