The Main Panel
This has several buttons which provide access to the ConfigurationService. "Module List" lists either all the modules or only those that are unused (ie not attached to a ROD).
"Save configuration" saves a configuration snapshot into the current directory (from the server's point of view).
"Reload configuration" is used to revert to the configuration in the initial file. This also picks up any changes to the file made externally.
There are several views:
Tree view
This is a view from the RODs perspective.
Use the right mouse button on items to get more options.
From here you can:
- Add a ROD to a crate
- Display the ROD view
- Add an empty MUR to a ROD
- Add an unmapped Module to an MUR
- Display a module's internal configuration
- Edit some module mappings
ROD view
This is accessible by a right mouse click on a ROD in the tree view. From here you can add a module into a slot on the ROD.
A left click on an MUR will produce the MUR view.
MUR view
Accessible only from the ROD view.
From here you can add a module. You can also modify any BOC channel settings here.
Power view
A table of parameters for each module + defaults for all the parameters.
Physical view
A view of modules on the barrel.
This may have been superceded by the main SctGui.
To do
- Crate and Card level Power parameters
- BOC and TIM Card level configuration