AcronymSoup
*[[CORBA]] *[[BOC]] *[[DAQ]] *[[DCS]] *[[DDC]] *[[DSP]] *[[IDL]] *[[ILU]] * OmniORB *[[ORB]] *[[POA]] ...
1K - last updated 2004-06-23 18:33 UTC by
ActionList
Following PhoneMeeting of 26 November 03 [[Alan]] will * discuss the new ArchivingService code with Alessandro. ... new [[DSP]] code. [[Alessandro]] will check on [[DCS]] problems, and work on preformance of ArchivingService. ...
1K - last updated 2003-12-01 17:18 UTC by
AlanBarrDone
===Really finished=== * RxDelay based on sendid ** [[ChrisLester]] has done this *Cut-down version of ... macro-assembly. ** trim range, response curve? * Dcs information saving with test results. * Web interface ...
1K - last updated 2005-01-28 15:49 UTC by
AlanBarrToDo
== Top Priorities == * Comparisons of data should be to reference set rather than to "ideal case" * Monitoring ... ** Abdel and Kamil have it working for the [[DCS]] ** IOManagerDB talks to DB through MySQL c-api ... temperature. ** Now going to be done through [[DCS]] == lower priority == * Histogramming of Raw data ...
4K - last updated 2006-07-07 22:25 UTC by
AnybodyToDo
== DAQUSER's WISHLIST == This is a list of things which if ANYBODY (who has time) did, would be very ... to all modules?) * Right click on a module in "DCS" view should include the ability to set (at module ...
10K - last updated 2008-08-20 14:19 UTC by
Barrel3Analysis
There are several people doing analysis of [[Barrel3]] on data taken during assembly, and during warm ... [http://www-pnp.physics.ox.ac.uk/~daquser/dcs_analysis/sct_barrels.html DCS Analysis] * Steve's ...
1K - last updated 2005-05-04 12:17 UTC by
Barrel3HardwareConfig
Part of [[OxfordSetup]] Specific to the tests of Barrel 3, the crates have been cabled up according to ... in the crate and talks natively in CAN to the DCS Computer through the CAN bus. Each of these cards ... generated by the DAQ side and gets copied to the DCS side is called Cnf_Map.txt. It contains the mapping ...
1K - last updated 2005-03-10 14:09 UTC by
Barrel6Analysis
=== Log books === * Electronic [http://www-pnp.physics.ox.ac.uk/~daquser/cgi-bin/sctroddaqsummary.cgi ... * For instructions on how to do analysis of DCS data see Abdel and Kamil's page: [http://www-pnp.physics.ox.ac.uk/~daquser/dcs_analysis/sct_barrels.html ... DCS]. The root trees with both Power Supply as well ... from [http://www-pnp.physics.ox.ac.uk/~daquser/dcs_analysis/B6/dcs_b6_analysis.html this page]. === ...
4K - last updated 2005-08-12 15:42 UTC by
BilgeToDo
== In Progress== ?? == DONE == Thesis Debugging ROS issues during physics running Get TDC/ADC setup to ... as raw scans -- involves reanalysing, grabbing DCS information and putting on the web... added new ... from Coldruns now done. this involves grabbing DCS information from the original analysis and putting ...
1K - last updated 2007-05-13 19:44 UTC by
CheckingMappings
==Tx to Rx== To check TX <-> RX mappings, do: <pre> SctGui -> Tools -> Launch SctApiGUI ... -> Probe View Right Click -> Actions -> DCS mapping scan </pre> The output to the command ...
1K - last updated 2006-05-02 09:44 UTC by
ChrisLester
Full name ChristopherLester. Homepage: http://www.hep.phy.cam.ac.uk/~lester/index.html Todo * put protection ... external packages ** ~/sct_rcd/ for rcd * srsctdcs1.cern.ch ** Windows dcs machine with pvss3 etc ...
1K - last updated 2008-02-07 11:23 UTC by
CombinedRunning
This page replaces the old [[Sr1Setup]] page, which is largely obsolete. BuildingSctRodDaq is some tips ... * Combined SCT/TRT running: /daqsoft/combined/partitions/part_Combined.xml ...
3K - last updated 2006-06-21 14:38 UTC by
DCS
The Detector Control System (DCS) software is available from http://www.hep.phy.cam.ac.uk/atlas/macro-assembly/DCS/welcome.html ...
1K - last updated 2004-06-30 11:07 UTC by
DIM
20060115 Main requirements for DIM/DCS are in tdaq-01-02-00 release notes at http://rd13doc.cern.ch/cmt/releases/download/tdaq-01-02-00/RELEASE_NOTES.html ...
1K - last updated 2006-01-17 11:10 UTC by
DaqMeetingJune2005ActionList
==Available test systems== ====Short-term test systems==== * [[Barrel5]] - the afternoon and evening ... discussed * [[Dave]] to add pin current to GUI DCS display. SynchTriggerNoiseDebugging ...
1K - last updated 2005-09-14 20:11 UTC by
EndcapC Combined run
== General == Please keep an eye on the module HVs, LVs and temperatures during the run. On SctGUI - ... select menu 'Display'->'DCS Conditions', then on the selection panel on the ...
6K - last updated 2006-12-08 17:07 UTC by
HomePage
==Overview== This Wiki is for discussing the SctRodDaq software. Although I see no reason why this couldn't ... expand to cover [[DCS]] stuff too If you don't know what SctRodDaq is, ...
3K - last updated 2004-01-09 13:20 UTC by
JanuaryTestingWeek
==Aim== To find out any remaining problems with SctRodDaq which could compromise our ability to do stand-alone ... do before Monday 23 Jan:</i> * Endcap area DCS machine needs to be working - currently being repaired ... part signed off by Alan 23/01/2006</I> === DCS === <i>To do during the testing week 23 Jan ... be OK * GUI Analysis names (DR) ** fixed * GUI DCS display (DR) * Physics as above (AJB+DR) * Check ...
1K - last updated 2006-03-31 11:28 UTC by
Matrix
Matrix is part of the cooling and laser interlock systems. Its purpose is to send "enable" signal to ... which you want to edit, i.e. for Barrel6 C://SCT_DCS/Imatrix/test_matrix_B6/master_zminus.vhd * Change ... means off, follow examples in this file: C://SCT_DCS/Imatrix/test_matrix_work/test_matrix_work_Zminus.vhd ...
1K - last updated 2005-03-30 09:40 UTC by
Meeting12October2005
===SCT DAQ Job List Following ID Week=== ====12th October 2005==== For SCT and Combined SCT/TRT running ... Job list in [[Dave]]’s talk ** Displaying more DCS data and making existing faster – [[Dave]] needs ...
2K - last updated 2005-11-09 15:48 UTC by
Merge-C6-C7
(See also MergingPagesForOmniMigration) First * Freeze SctRodDaq_3_0_BRANCH ** Chris sent mail 5th November ... 11 || Alan has merged changes in the following: DcsInterface, ConfigurationInterface, Pipeline Algorithm, ... || done 4 || Alan has added a new streamer for DcsData (version2) which is beyond the scope of this ...
1K - last updated 2004-11-10 11:31 UTC by
ModuleConfig
Part of [[BarrelConfig]] The module configuration files are downloaded by the command getDBfiles, which ... TX signal chain. Note that power supplies in DCS should be configured for this redundancy separately. ... Be careful here with ** using redundant TX. DCS should also be configured. ** masking off channels ...
3K - last updated 2008-09-16 10:23 UTC by pcatsct06.cern.ch
OksSchemaDevelopment
Possibly misnamed, this also applies to any additions to any other kind of configuration. What needs ... Extra power supply crate parameters: For the DCS canbus configuration: * HOST (string, name of DCS ...
1K - last updated 2005-12-09 09:02 UTC by
OnlineSoftwareVersion
Below describes moving from 00-19-01 to 00-20-00. See TdaqOneSixNotes for moving to 01-06-00. Conversation ... we may need to keep 19-01 because 20 requires DCS people to move to PVSS 3.0beta which they haven't ...
2K - last updated 2006-09-07 09:19 UTC by wwwcache2.rl.ac.uk
Overview
This Wiki is mostly out of date, see the SCT TWiki pages for more up to date info. Still most important ... couldn't expand to cover more stuff too, e.g. [[DCS]]. ==New Users== Please click on the NewUsers link ...
1K - last updated 2009-01-14 14:12 UTC by
PhaseMeasurement
This page documents how to make the phase measurement of the cosmic trigger with respect to the 40Mhz ... instead. This brings in the segment defined ...
4K - last updated 2006-10-17 12:53 UTC by
PhoneMeeting
== Agenda == Current state of [[SctRodDaqRelease2.1]] * progress with [[Doug]] and [[Bruce]] * documentation ... ** seems to be a [[DSP]] issue. * on the [[DCS]] side, [[Alessandro]] reports problems recovering ...
2K - last updated 2003-11-28 15:03 UTC by
PointOneDcs
==Point 1 DCS== ==PVSS Systems== SCS Host System Number System Name KVM Channel Status PCATLSCTSCS 20 ... 28 ATLSCTUSENV US-8 Installed PCATLSCTDCS01 29 ATLSCTUSAENV USA-8 Installed PCATLSCTUSEPS1 ... The console in US15 is located in the main DCS rack. To move between systems connected to the ... above systems using the normal user account "sctdcs", but if you wish to open a connection from the ... need to connect to the terminal server "cerntsatldcs01" using your own personal NICE account. This will ...
3K - last updated 2007-01-31 16:07 UTC by
Point 1 Setup
see also PointOneDcs == Introduction == All DAQ related servers, SBCs and ROSs are in USA15. We have ... DDC commands cannot be sent from SctGUI, but DCS data will continue to be dislayed. </pre> ...
7K - last updated 2008-09-19 08:18 UTC by
PowerSupplySystemSetup
Part of OxfordSetup. * Start the PVSS II Version 3.0 Console ** Start/Programs/PVSS II 3.0/ PVSS II Console ... panel "SCT_Diagn_MoPS.pnl" in directory D:\SCT_DCS\MoPS0501\MoPS_Release4_Work\panels\ ...
1K - last updated 2005-03-07 12:04 UTC by
PreparationsForFullBarrel
* MultiCrateRunning using RodCrateDaq ** Perhaps ChrisLester can take this over? * BinaryOverVme ** did ... and merging configurations *** By geometry, DAQ, DCS and time ** Kamil, Jorgen, Paul, Shaun working ...
1K - last updated 2005-02-15 09:59 UTC by
SCTDAQ
SCTDAQ is the MuSTARD DAQ system, see <a href="http://atlas.web.cern.ch/Atlas/GROUPS/INNER_DETECTOR/SCT/testdaq/testdaq.html">here</a>. ... the structure for the tests, it also integrates DCS (using SCTLV and SCTHV). ...
1K - last updated 2003-12-08 16:50 UTC by ppnt141.physics.ox.ac.uk
SctApiGUI
SctApiGUI brings up a button panel which gives mainly diagnostic/debug access to SctApi. == Probe View ... can be performed on any crate or channel in the DCS system. == Scan View == From here any previous ...
1K - last updated 2004-01-12 12:44 UTC by
SctApiSplit
== Methods at Crate level only == Mostly debug or access to low-level features not used in normal Calibration ... long dpeValue); // Put timeout in here? void ddcSetSingleTimeout(in short timeout); short ddcGetSingleTimeout(); ... void ddcSetMultipleTimeout(in short timeout); short ddcGetMultipleTimeout(); ... // Also set DDC parameters... void ddcSetCrateParameterFloat(in long crate, in string name, ... in float value); // SingleTimeout void ddcSetCardParameterFloat(in long crate, in long card, ...
7K - last updated 2005-02-25 12:53 UTC by
SctDdc
SctDdc is a library for comunication between SctApi and DCS. It makes use of the Online DDC package. ...
1K - last updated 2003-11-27 17:00 UTC by
SctRodDaqRelease2
SctRodDaq was released as version 2.00 on Tuesday 18 November. This was the first public release. A minor ... the test machine all on the localhost * SCT_nodcs.data.xml: This runs the real system, but does not ... include the DCS partition * SCT.data.xml: Includes the DCS partition ...
2K - last updated 2003-12-09 17:54 UTC by
SctRodDaqRelease3
Release 3 is now available as [[SctRodDaqRelease3.01]] from [[Download]]. See also [[SctRodDaqRelease3.0]]. ... better database integration, and display of DCS conditions * Full testing system ** Correctness ...
2K - last updated 2005-01-11 14:02 UTC by
SctRodDaqRelease3RC
First pre-release of [[SctRodDaqRelease3]]. Outstanding issues: * Has someone checked the SummaryPlots ... (1 defect over 1536 channels!!!)? * Split dcs config according to confdb suggestions? * Minimum ... are skipped * DDC host name (PVSS) is hidden in dcs config file ** There is now a DDCHardware_template.data.xml ...
1K - last updated 2004-04-07 12:48 UTC by ugps02.ph.bham.ac.uk
SctRodDaqRelease4
This release is the second major release for MacroAssembly and the [[SRBuilding]]. Lessons learned from ... conflict with other sub-detectors * Greater DCS integration **'''largely done''' * Move to online-00-21-00. ... Dependant on DCS ** DCS have requested this as a matter of priorty ...
2K - last updated 2005-02-14 12:09 UTC by
StatusOfOmniMigration
See also OmniMigration for related topics. The following table should (approximately) represent the current ... || Contacts ipc_server -- but does not work || DCS to be merged from CVS head -- [[Alan]] || || archiving ... - || builds || - || - || CVS merge required for DCS || || SctDataDisplay || ChrisLester || builds || ... - || builds|| - || - || CVS merge required for DCS || || SystemTests || [[Bruce]] et al || builds ...
1K - last updated 2004-07-13 13:02 UTC by
SynchTriggerNoiseAnalysis
Analysis of the SynchTriggerNoise == Analysis of SynchTriggerNoise data from Alan Phillips: == The Following ... did not work during the datataking and so the DCS information has not been recorded with these modules. ...
1K - last updated 2005-10-11 15:16 UTC by
TdaqOneSixNotes
Issues that have cropped up moving to tdaq-01-06-00. == Getting things to compile == The main thing we've ... While fixing host names, a question. Should SctDcsSegmentController run on Host, or would ddc_station ...
3K - last updated 2006-10-05 09:25 UTC by
config server
From Bruce: <pre> At the moment config_server thinks it's a run controller. I presume running as ... -P SctRootSegmentController -s SCTRootSegment_no_dcs -n config_server should work... </pre> From ... in TDAQ14_BRANCH introduced last week to get the dcs/nodcs/ttcvi segment in-out switching working. Probably ...
1K - last updated 2005-11-02 10:39 UTC by
runInPmgEnvFromIS
This is a MiniUtils (TM) utility for running a program (if necessary in gdb or valgrind) in the environment ... '/alldisks/pc-sct-mon-09/tmp', 'PVSS_PATH': '/sw/dcs/pvss2_v3.0', 'TDAQ_ERS_WARNING': 'lstderr,mrs', ...
2K - last updated 2007-06-01 15:38 UTC by