2DBOCscan
A 2DBOCscan scans through the RxDelay and RxThreshold at the same time, picking the best values for both ... // Reset hardware counters for(fmt=0; fmt<FORMATTERS_PER_ROD; fmt++){ writeRegisterDirect(FMT_COUNT_CTRL(fmt),32,0,0); ... } // Set hardware counters for(fmt=0; fmt<FORMATTERS_PER_ROD; fmt++){ writeRegisterDirect(FMT_GLOBAL_CNT(fmt),16,0,width); ... works } // Start Counting for(fmt=0; fmt<FORMATTERS_PER_ROD; fmt++){ writeRegisterDirect(FMT_COUNT_CTRL(fmt),32,0,1); ... Wait for counting to stop for(fmt=0; fmt<FORMATTERS_PER_ROD; fmt++){ old_cnt = 0xffffffff; cnt ...
4K - last updated 2008-08-07 20:10 UTC by
ActionList
Following PhoneMeeting of 26 November 03 [[Alan]] will * discuss the new ArchivingService code with Alessandro. ... * document the [[Configuration]] [[Matt]] will * attempt a fix on the time-out problem ...
1K - last updated 2003-12-01 17:18 UTC by
Configuration
== CORAL/COOL == OK, current next generation is CORAL/COOL, the main advantage being that the same database ... it semi-permamently from within the GUi. -- [[Matt]] What is semi-permanent? Changed in the ConfigurationService, ... but not in the xml file? -- [[Alan]] Yes -- [[Matt]] The other option is to use [[sctConfGUI]]... ...
1K - last updated 2006-08-22 09:30 UTC by
DSP software
This page is for discussing matters pertaining to the Digital Signal Processor software on the ROD. ...
1K - last updated 2004-02-12 12:40 UTC by
DspCodeToDo
DspPrimitivesReview == Changes to DSP Code == Error handling: * Read out errorInfo structs * mask faulty ... but it could do with expanding How robust are formatters to clk/2?: * Only a problem if formatter decoding ...
1K - last updated 2006-02-08 10:28 UTC by
ErrorEventDecoder
This page describes the output of the Error Event Decoder which has now been incorporated into the DSP ... ROD, the data receivers route the data to 8 Formatter FPGAs which convert the serial data streams ...
7K - last updated 2009-09-11 17:23 UTC by
FittingServiceFunnies
== AnalysisService == [http://www-pnp.physics.ox.ac.uk/~barra/WikiPlots/3024.5.20220170100002_channelRC_1.ps ... on the threhold range scanned. ==From Matt== Mail from [[Matt]] - not investigated yet. [http://www-pnp.physics.ox.ac.uk/~barra/WikiPlots/Fits.gif ... Date: Thu, 07 Oct 2004 14:26:51 +0100 From: Matt Palmer <SECRET> To: Peter Phillips <AGENT>, ...
2K - last updated 2005-02-28 17:37 UTC by
GeneralDiscussion
TriggerFlow ---- I think I'll add a Oxford link or two to the UserStories [[Alan]] ---- This is a page ... release page should stay as John's page. -- [[Matt]] ---- I've set the EXTRACT_ALL flag in the Doxyfile_c++ ... to a file that ends with ".png" or .jpg" -- MattPalmer I've added our discussion about the OnlineSoftwareVersion ...
1K - last updated 2006-03-30 09:13 UTC by
Help
If you have never used a Wiki before, here is a very quick introduction and some helpful links. You will ... markup language. A description of the text formatting rules for this Wiki can be found at SyntaxRules. ...
1K - last updated 2006-03-31 09:31 UTC by
HistogrammingProblemsInPhysicsMode
While trying to run the ( version 1.1.2.5 of ) physicsModeTimingScan.java in TDAQ14_BRANCH under SctApiIPC/scripts, ... is the block of registers associated with formatter 6 (where the modules are attached). 0x70f on ...
1K - last updated 2006-05-05 14:35 UTC by
HomePage
==Overview== This Wiki is for discussing the SctRodDaq software. Although I see no reason why this couldn't ... markup language. A description of the text formatting rules for this Wiki can be found at SyntaxRules. ...
2K - last updated 2004-01-09 13:20 UTC by
InterMap
AbbeNormal http://ourpla.net/cgi/pikie? AcadWiki http://xarch.tu-graz.ac.at/autocad/wiki/ Acronym http://www.acronymfinder.com/af-query.asp?String=exact&Acronym= ... CraoWiki http://wiki.crao.net/index.php/ CreationMatters http://www.ourpla.net/cgi-bin/wiki.pl? Dictionary ...
3K - last updated 2003-11-21 14:30 UTC by
IssuesDuringOmniMigration
Problems and queries arrising during the migration to online-00-21-02 from online-00-19-01. ---- See ... any more as I have only found it being used by Matt's "doSoon" kludges. I've been deleting it wherever ... We did have some problems with this.... -- MattPalmer ** OK, I've put the pmg_sync() stuff back ... I had commented it out of. The prescription Matt proposed was to replace the lines containing "doSoon" ... * Matt reminded me that it's easy to forget to call the ...
8K - last updated 2004-12-09 16:39 UTC by
Jabber
Jabber is an open instant messaging system. * Users run client applications that connect to a server. ... - written thesis *mjp39@amessage.info MattPalmer - no longer on the project We can also have ...
1K - last updated 2006-07-12 07:57 UTC by
Matt
What MatthewPalmer is known as! ...
1K - last updated 2003-11-21 17:52 UTC by
MattPalmer
Currently a third year and is primarily responsible (with Alan and Dave) for these areas: * FittingService ...
1K - last updated 2004-01-15 10:42 UTC by
MatthewPalmer
Full name of MattPalmer ...
1K - last updated 2004-01-09 14:52 UTC by
Meeting12October2005
===SCT DAQ Job List Following ID Week=== ====12th October 2005==== For SCT and Combined SCT/TRT running ... 11. TIM and firmware – [[Alan]] and [[Matt]] ** Don’t count triggered events in fixed frequency ...
1K - last updated 2005-11-09 15:48 UTC by
Meetings
Please keep a list of meetings here. We are now using [[Jabber]] for online discussions and low-level ... meetings. -- MattPalmer == Current Agendas == * [[Meeting30October2007]] ...
1K - last updated 2007-10-29 08:33 UTC by
ModuleConfig
Part of [[BarrelConfig]] The module configuration files are downloaded by the command getDBfiles, which ... THIS CHIP IS NOT READ OUT so why does its config matter? Only change here is master(0) -> slave(1) ... THIS CHIP IS NOT READ OUT so why does its config matter? Only change here is master(0) -> slave(1) ...
2K - last updated 2008-09-16 10:23 UTC by pcatsct06.cern.ch
OksSchemaDevelopment
Possibly misnamed, this also applies to any additions to any other kind of configuration. What needs ... * Whether to trap TIM, TTC or ROD triggers * Formatters in expanded, edge mode etc. Some suggestions ...
2K - last updated 2005-12-09 09:02 UTC by
OnlineSoftwareVersion
Below describes moving from 00-19-01 to 00-20-00. See TdaqOneSixNotes for moving to 01-06-00. Conversation ... 15/1/2004 Matt: I am using 00-20-00, but I think we may need ... config files work in 19-01 too? (14:13:37) Matt: No, we need to keep two sets for now.... (14:14:47) ... Matt: But I think it is important to pressure a move ... (14:17:19) bjg1492: Yes (14:18:33) Matt: OK, in config/databases and daq-1/is, check out ...
2K - last updated 2006-09-07 09:19 UTC by wwwcache2.rl.ac.uk
PeterPhillips
I'm mostly tied up with other things, but from time to time I pop up to provide input on matters related ...
1K - last updated 2004-02-05 10:26 UTC by
PhoneMeeting
== Agenda == Current state of [[SctRodDaqRelease2.1]] * progress with [[Doug]] and [[Bruce]] * documentation ... work, since no calibration - fix attemted by [[Matt]] * Problem with FullBypassTest ** seems to be ... given at CERN by [[JohnHill]], [[Bruce]] and [[Matt]]. * Demonstration of how to install and run the ...
1K - last updated 2003-11-28 15:03 UTC by
PhoneMeeting2
16/3/2004 Issues: == How to proceed when a module dosen't behave well (e.g. LV trip) == note : Requires ... for DB structure need to be investigated. ===Matt to add status information=== == Ownership/deletion ...
2K - last updated 2004-03-16 14:47 UTC by ppnt164.physics.ox.ac.uk
Point 1 Setup
see also PointOneDcs == Introduction == All DAQ related servers, SBCs and ROSs are in USA15. We have ... hierachy <pre> In principle it should not matter which machines are booted in what order. But ... loaded: * ROD Controller: f20 * ROD Formatter: f23 * ROD EFB: f1d * ROD Router: f1b Then the ... (14/08/07): * ROD Controller: f23 * ROD Formatter: f23 * ROD EFB: f1f * ROD Router: f1b Then the ... and seem to work fine: * Controller: v2ef * Formatter: s23f * EFB: v22f * Router: v1ef Now (12/11/07) ...
2K - last updated 2008-09-19 08:18 UTC by
ROD
The Read-Out Device is responsible for decoding the data from the modules and off-loading event data ... event data. The major components are: * The Formatter * The Event Fragment Builder * The Router * ...
1K - last updated 2008-04-18 14:31 UTC by
RODBusyMonitoring
Disorganised thoughts... To start with: My [Bruce] original email During running it's quite likely a ... was causing the busy by directly reading the formatter error bits and turning the module off... (I ... asking SctApi to investigate **) Copies formatter error flags to memory (as they clear on a read) ... problems and why ###) turn off link in formatter ###) check that ROD busy now not asserted Maybe ... RRIF_STATUS_0 won't. Then SBC can read the formatter registers to see what happened (and clear them ...
1K - last updated 2006-08-03 16:23 UTC by
RodModule
This page is for discussion matters pertaining to the RodModule software. ...
1K - last updated 2004-02-12 12:28 UTC by
RodModule software
This page is for discussing matters pertaining to the RodModule software. ...
1K - last updated 2004-02-12 12:38 UTC by
SBC booting and configuration
This page is for discussing matters pertaining to booting and configuring the Concurrent Technologies ...
1K - last updated 2004-02-12 12:51 UTC by
SctRodDaqPaper
List of exisiting resources & links == Official papers == * The Data Acquisition and Calibration ... Bilge's thesis (.pdf)] * Matt's thesis: ** http://www.hep.phy.cam.ac.uk/atlas/susy/main.html ...
1K - last updated 2008-07-28 09:07 UTC by
SctRodDaqRelease2
SctRodDaq was released as version 2.00 on Tuesday 18 November. This was the first public release. A minor ... have been the masks I suppose....not sure... [[Matt]] * The full bypass test has some issues (we're ...
1K - last updated 2003-12-09 17:54 UTC by
SctRodDaqRelease4
This release is the second major release for MacroAssembly and the [[SRBuilding]]. Lessons learned from ... Dependant on DCS ** DCS have requested this as a matter of priorty so this is now happening in a branch ...
2K - last updated 2005-02-14 12:09 UTC by
SctRodDaqRelease4.1
See [[SctRodDaqRelease4]] for issues related to release 4 in general. SctRodDaqRelease4.1.1 fixes bug ... 614]:: SCT DSP code version 1.1.1 Nov 1 2004 Formatter code version SCT e 20 40 MHz EFB code version ...
2K - last updated 2005-05-09 17:03 UTC by
SctRodDaqRelease4.3.RC1
See also [[SctRodDaqRelease4.3]]. == HOW CREATED == [[SctRodDaqRelease4.3.RC1]] was created on 15th Dec ... to work around this problem. Ought not to matter to end users. [[Chris]] * FlashLoadCrate ** ...
5K - last updated 2005-12-19 11:21 UTC by
SctWeekTechnicalMeetingDec2003
I am proposing a technical meeting amongst the developers to discuss in detail what needs to be done ... Please feel free to add or change things -- [[Matt]] === SctRodDaqRelease 2.1 === See also [[SctRodDaqRelease2.1]] ... * [[Matt]] will branch today. * Aim for release this week ... control, status etc: RodCrateDAQ? Bruce and Matt will investigate .. if not then go ahead * ABCDModule ... Some minor re-arrangement of used/unused. Matt will propogate through * Testing (stress): We ...
2K - last updated 2003-12-08 17:29 UTC by
SoftwareDevelopers
The people responsible for the SctRodDaq software are (in no particular order): * JanetCarter * PeterPhillips ... * TrevorVickey No longer on the project * MatthewPalmer * AlessandroTricoli ...
1K - last updated 2006-02-11 21:11 UTC by
SynchTriggerNoise
In the SynchTriggerNoise test, a trigger is sent at the same time to modules. An analysis for this data ... Solution: Fix up your TIM switches according to Matt's web page: http://www.hep.ucl.ac.uk/atlas/sct/tim/ ... development! Alan (with thanks to Bruce and Matt W). ===== Error messages from Problem 5 (assembler ...
1K - last updated 2005-09-15 22:21 UTC by
SynchTriggerNoiseDebugging
==Alan's findings as of 12/7/05== One's TIM needs to be set up as described in http://www.hep.ucl.ac.uk/atlas/sct/tim/. ... useful somewhere about what state the formatters get into that causes "ALMOST_FULL" (ie why ... 614]:: SCT DSP code version 1.1.1 Oct 15 2004 Formatter code version SCT e 20 40 MHz EFB code version ...
1K - last updated 2005-07-12 16:36 UTC by
SyntaxRules
Most of the rules can be found at OddMuse:Text_Formatting_Rules. There are however a few additions. It ...
2K - last updated 2004-03-31 14:49 UTC by
TestBench software
This page is for discussing matters pertaining to the Windows-based TestStand software. ...
1K - last updated 2004-02-12 12:41 UTC by
Testing-2005-11-02
Part of [[AlansSr1Tests]] <pre> (16:11:22) Alan: Ok what do you want me to test? (16:11:54) PeterP: ... DSP code version 1.2.0a Oct 10 2005 15:01:32 Formatter code version SCT e 20 40 MHz EFB code version ... DSP code version 1.2.0b Nov 1 2005 19:29:52 Formatter code version SCT e 20 40 MHz EFB code version ...
1K - last updated 2005-11-03 15:08 UTC by
TestingSctRodDaq 4 3 RC1
See also [[SctRodDaqRelease4.3]] and [[TestingSctRodDaq_4_3_RC2]]. ----- I tested SctRodDaq_4_3_RC1 in ... 4_3_RC1 as that gets uploaded at run time. Formatter code etc is "as was" saved to ~sctrod/testing_4_3_RC1/RodDaq/RodUtils/TEST/*) ...
1K - last updated 2007-04-23 09:22 UTC by
TriggerType
What Bruce knows about trigger types. And some of what MattW knows too TIM has a register for trigger ...
1K - last updated 2006-04-26 15:23 UTC by
VME Hardware and interfacing
This page is for discussing matters pertaining to VME hardware and interfacing. Most useful so far is ...
1K - last updated 2004-11-18 16:46 UTC by