Barrel3HardwareConfig
Part of [[OxfordSetup]] Specific to the tests of Barrel 3, the crates have been cabled up according to ... a connection on the back of the crate to the Matrix. </pre> The configuration file that is ...
1K - last updated 2005-03-10 14:09 UTC by
Barrel5Exceptions
Features on [[Barrel5]] ==Modules which were replaced== * LMT02 Z-4 20220380200044 has been replaced ... suspect behaviour. Was disabled from Interlock Matrix for runs at SR1 ==Module Configuration file ...
1K - last updated 2006-03-31 15:42 UTC by
Matrix
Matrix is part of the cooling and laser interlock systems. Its purpose is to send "enable" signal to ... low temperatures. Instruction on updating the Matrix at the OxfordSetup : * on PPNT162, from the ... you want to edit, i.e. for Barrel6 C://SCT_DCS/Imatrix/test_matrix_B6/master_zminus.vhd * Change stave ... off, follow examples in this file: C://SCT_DCS/Imatrix/test_matrix_work/test_matrix_work_Zminus.vhd ... compile the project also using the file: test_matrix_work_Zplus.vhd (or master_zplus.vhd for Barrel ...
1K - last updated 2005-03-30 09:40 UTC by
OxfordSetup
For information about the 4 barrels, see AllBarrels For [[Barrel3]] testing, we used SctRodDaq version ... For setting up the Interlock, take a look at [[Matrix]] programming. The hardware documentation for ...
1K - last updated 2005-05-06 17:14 UTC by
SctApiSplit
== Methods at Crate level only == Mostly debug or access to low-level features not used in normal Calibration ... in Trigger trig, in unsigned long harness); CharMatrix probeScanHarnessWithTrigger(in unsigned long ...
1K - last updated 2005-02-25 12:53 UTC by