2DBOCscan
A 2DBOCscan scans through the RxDelay and RxThreshold at the same time, picking the best values for both ... + 9) % 24; // handle wrapping So the RxDelay is set 9ns from the falling edge best[1] = ... nbins=scanSize[0]*scanSize[1]; // Allow RXDELAY only as outer loop parameter - // this takes ... other parameters if(scanParameter[1] == BOC_VAR_RXDELAY) { newInformation(__FILE__, __LINE__, "BOC_RXDELAY ... bestDelay; if( (scanParameter[0]== BOC_VAR_RXDELAY) && (scanParameter[1]== BOC_VAR_RXTHRESHOLD) ...
3K - last updated 2008-08-07 20:10 UTC by
AlanBarrDone
===Really finished=== * RxDelay based on sendid ** [[ChrisLester]] has done this *Cut-down version of ...
1K - last updated 2005-01-28 15:49 UTC by
AlanBarrToDo
== Top Priorities == * Comparisons of data should be to reference set rather than to "ideal case" * Monitoring ... check scans work - CheckingMappings. * Sort out RxDelay when more than one rise and fall == Really ...
3K - last updated 2006-07-07 22:25 UTC by
BocSetupTests
These tests are designed to setup the registers of the back-of-crate card ([[BOC]]). *RxDelayTest *RxThresholdBasedOnConfigRegisterTest ...
1K - last updated 2006-12-11 16:50 UTC by
ISSctData
ISSctData package contains [[IS]] versions of all the TestResults that are defined in the SctData package. ... * Pipeline * RxThreshold * TrimRange * FBT * RxDelay * RxThreshold * TrimRange * NPtGain ...
1K - last updated 2006-02-27 11:36 UTC by
MarkSpaceRatioTest
One of the BocSetupTests. The idea behind this test is to set up the TX duty cycle (Mark:Space ratio) ... by * setting the module in clock/2 mode * doing RxDelay scans at different mark-space register settings ... to the modules (send soft reset) * doing another RxDelay scans at different mark-space register settings ...
1K - last updated 2005-03-22 22:09 UTC by
ModuleDiagnostics
No response # Is the module power on? # Is Icc above 100mA? If not, no module is connected. # Is Idd ... "2" in the probe, or scope. ** Solution - adjust RxDelay and RxCurrent (perhaps by doing BocSetupTests), ...
2K - last updated 2006-02-10 16:29 UTC by
ProblemsSeenInCurrentCode
6/10/2005 <pre> MDSP 1.20 Aug 11 2005 15:09:56 SDSP 1.20 Jul 26 2005 18:34:30 </pre> Testing ... sector highlighed the following problems: * RxDelay - modules do not enter clock/2 mode as they ...
1K - last updated 2005-10-07 09:27 UTC by
RxDelay
Phase of [[BOC]] pin sampling relative to 25 ns clock. See RxDelayTest. ...
1K - last updated 2004-07-22 20:35 UTC by
RxDelayTest
The RxDelayTest scans (strobes) and sets the delay of the [[BOC]] opto receiver sample relative to the ... An example of one of the BocSetupTests ...
1K - last updated 2005-03-22 22:12 UTC by
RxThresholdTest
This test is now deprecated replaced by the RxThresholdBasedOnConfigRegisterTest The RxThresholdTest ... See also RxDelayTest, BocSetupTests ...
1K - last updated 2004-12-14 19:39 UTC by
TimingIn
To measure the phase of the 40Mhz clock with respect to the cosmic trigger look at this page: PhaseMeasurement ... delay register and coarse delay register and one RxDelay register. == Scripts you might like to use ...
1K - last updated 2008-09-11 16:16 UTC by