BuildingSctRodDaq
We are currently using the tip of TDAQ14_BRANCH The setup script depends on the account you are using: ... -name "*.d"` 2) /usr/bin/ld: cannot find -lRCCVmeInterface Solution (from Chris): * make -C $SCTPIXEL_DAQ_ROOT/../VmeInterface ... * make -C $SCTPIXEL_DAQ_ROOT/../VmeInterface libRCCVmeInterface.a * make -C $SCTPIXEL_DAQ_ROOT/../VmeInterface ... libRCCVmeInterface.so == Random things that are copied ...
3K - last updated 2007-03-16 10:44 UTC by
Point 1 Setup
see also PointOneDcs == Introduction == All DAQ related servers, SBCs and ROSs are in USA15. We have ... Rack Y.23 | Rack Y.22 ----- SBC0 | SBC1 sbc-sct-rcc-bc-02 | sbc-sct-rcc-ba-02 C-side USA15 modules ... port 16 | REB port 14 ----- SBC2 | SBC3 sbc-sct-rcc-bc-01 | sbc-sct-rcc-ba-01 C-side US15 modules | ... Y.24-14 | Rack Y.25-14 ----- SBC7 | SBC5 sbc-sct-rcc-eca-02 | sbc-sct-rcc-ecc-02 ROS pc-sct-ros-eca-01| ... | ROBid 0x2401nn ----- SBC6 | SBC4 sbc-sct-rcc-eca-01 | sbc-sct-rcc-ecc-01 ROS pc-sct-ros-eca-00| ...
8K - last updated 2008-09-19 08:18 UTC by
RCC
My best guess is that this means Rod Crate Controller. Which means in practice a single board 6-U [[VME]] ...
1K - last updated 2004-07-23 21:29 UTC by
SBC
This page is for discussing isues related to booting and configuring the Concurrent Technologies Single ... Board Computer used as the [[RCC]]. ...
1K - last updated 2004-07-23 21:28 UTC by
SBC booting and configuration
This page is for discussing matters pertaining to booting and configuring the Concurrent Technologies ... single-board computer used for the RCC. ----- Problem: tftp doesn't load the init file ...
1K - last updated 2004-02-12 12:51 UTC by
SortingOutRodDaqRodUtils
Part of SortingOutRodDaq Differences between SctRodDaq_3_0_BRANCH and oxford dev4 (now SR1) local copy ... 9c9 < #include "../../VmeInterface/RCCVmeInterface.h" --- > #include "RCCVmeInterface.h" ...
2K - last updated 2005-10-06 19:36 UTC by
VmeConfiguration
=== Creating a config file === The VME configuration is achieved using the vmeconfig program in the DataFlow ... on boot === This is done by the /etc/init.d/vme_rcc script which can be copied from the dataflow installation. ... found by: ls $DF_INST_PATH/../*/*/src/driver/*_rcc and read: man chkconfig "drivers_rcc" would appear ...
1K - last updated 2004-11-29 17:09 UTC by