BOC
The BOC (or Back Of Crate) module is part of the SctHardware. It is the primary data and control interface ... The [[BOC]] parameters are configured from the BocSetupTests Extracted from Maurice Goodrick's BOC ...
1K - last updated 2005-08-10 11:19 UTC by
BocSetupTests
These tests are designed to setup the registers of the back-of-crate card ([[BOC]]). *RxDelayTest *RxThresholdBasedOnConfigRegisterTest ... *RawScan There seems to be a ProblemWithBocSetupTests (hopefully now fixed) that casted doubt ...
1K - last updated 2006-12-11 16:50 UTC by
FunctionalOverview
Tests are written up in [http://hepwww.rl.ac.uk/atlas-sct/documents/pro/Electrical_Tests_338.pdf Peter's ... back-of-crate ([[BOC]]) opto-electronics. See BocSetupTests ---- Those that test & calibrate ...
1K - last updated 2005-09-14 17:14 UTC by
MarkSpaceRatioTest
One of the BocSetupTests. The idea behind this test is to set up the TX duty cycle (Mark:Space ratio) ...
1K - last updated 2005-03-22 22:09 UTC by
ModuleDiagnostics
No response # Is the module power on? # Is Icc above 100mA? If not, no module is connected. # Is Idd ... - adjust RxDelay and RxCurrent (perhaps by doing BocSetupTests), until a good signal is received. [Note ...
2K - last updated 2006-02-10 16:29 UTC by
ProblemWithBocSetupTests
Running doRawScan exclusively: http://www.hep.phy.cam.ac.uk/~atlasdaq/images/Raw.1209.0.20220170100053_1.gif ...
1K - last updated 2005-01-21 18:21 UTC by
RawScan
This sends triggers to the modules and records (in a histogram) the actual raw bitstream coming from ... See also BocSetupTests ...
1K - last updated 2004-07-19 15:40 UTC by
RxDelayTest
The RxDelayTest scans (strobes) and sets the delay of the [[BOC]] opto receiver sample relative to the ... An example of one of the BocSetupTests ...
1K - last updated 2005-03-22 22:12 UTC by
RxThresholdTest
This test is now deprecated replaced by the RxThresholdBasedOnConfigRegisterTest The RxThresholdTest ... See also RxDelayTest, BocSetupTests ...
1K - last updated 2004-12-14 19:39 UTC by
TxCurrentTest
This changes the opto transmitter current. You probably dont want to do this unless you've really zapped ... modules with 5 years worth of irradiation. See BocSetupTests for more approprate examples! Here is ...
1K - last updated 2006-06-15 16:58 UTC by