# The registers are set one-by-one in the order they appear in this file
eprx.dll.current 1
eprx.dll.confirmcount 2
eprx.dll.coarselockdetection 1
# picoTDC data bus, 160Mb
eprx\.enablereinit 1
eprx\.[0123]\.[02]\.enable 1
eprx\.[0123]\.datarate 1
eprx\.[0123]\.trackmode 0
eprx\.[0123]\.[02]\.term 1
rst\.eprx\.[0123]\.dll 1
rst\.eprx\.[0123]\.dll 0
# picoTDC sync, 160Mb
eprx\.5\.2\.term 1
eprx\.5\.datarate 1
eprx\.5\.2\.enable 1
rst\.eprx\.5\.dll 1
rst\.eprx\.5\.dll 0
# EC channel
eptx\.ec\.enable 1
eptx\.ec\.drivestrength 7
eprx\.ec\.enable 1
eprx\.ec\.trackmode 0
eprx\.ec\.term 1
eprx\.ec\.phase 0
eprx\.ec\.autophaseresetdisable 1
# picoTDC resets
eptx\..\.datarate 1
eptx\.[01]\.2\.enable 1
eptx\.[01]\.2\.drivestrength 4
eptx\.[23]\.0\.enable 1
eptx\.[23]\.0\.drivestrength 4
# PS DLL configuration
ps.dll.confirmcount 2
ps.dll.currentsel 2
# PS clocks
ps.0.freq 1
ps.0.drivestrength 7
ps.0.enable 1
ps.2.freq 1
ps.2.drivestrength 7
ps.2.enable 1
# GPIOs
# Tthe default settings (0) are safe (all inputs)
# GPIO 1 is the DTM1 resetb for the TB2025 carrier
pio.1.out 0
pio.1.dir 1
#
# Analogue peripherals
dac.voltage.enable 1
vref.enable 1
dac.voltage.value.h 8
dac.voltage.value.l 0
# For more reliable FastIC8 I2C use SCL CMOS drive mode and high drivestrength
i2c.0.scldrivestrength 1
i2c.2.scldrivestrength 1