HardwareProblems
You shouldnt need this if you follow instructions for SettingUpDaqHardware There are numerous things ... are listed below. Many are diagnosed using ScanVme. * If the TIM doesn't appear this could be ... (check the TIM first) * A ROD doesn't appear in ScanVme at all (this is easy to diagnose!) * A ROD ... log file somewhere... If everything turns up in ScanVme then try TouchRod and EchoTest from RodUtils. ...
1K - last updated 2005-03-24 01:19 UTC by
ROD
The Read-Out Device is responsible for decoding the data from the modules and off-loading event data ... is also possible using the RodUtils suite. ScanVme is also a very useful program. ...
1K - last updated 2008-04-18 14:31 UTC by
ScanVme
"scanvme" is included in the dataflow software, so it should be in the path after setting up SctRodDaq. ...
1K - last updated 2003-12-08 11:52 UTC by
SettingUpDaqHardware
Instructions from JohnHill... There have been several occasions over the last couple of years where during ... only forget to change it again later!). 5) "scanvme" is a useful tool in the DataFlow suite - typically ...
1K - last updated 2005-03-24 01:22 UTC by