ATLAS SCT Macro-Assembly ROD firmware downloads

The ROD VHDL, Master DSP and Slave DSP binary images are collected here for convenience. A set of images which work together will be collected together in a "release", though there is no formal release mechanism. The firmware will only work on Rev E and Rev F RODs - earlier ROD hardware will no longer be supported.

November 2004

The most recent "release" has changes in two VHDL components only (Event Fragment Builder and Formatter):
  
Event Fragment Builder (efb_v2Be.bin)
Master DSP (version 1.1.1)
Formatter (fmt_s20e.bin)
Slave DSP (version 1.1.0 - IDRAM)
Controller (rcf_v1Ce.bin)
Slave DSP (version 1.1.0 - IPRAM)
Router (rtr_v21e.bin)
Slave DSP (version 1.1.0 - xcode)

October 2004

This brings together various changes in both the VHDL and DSP software:
Event Fragment Builder (efb_v29e.bin)
Master DSP (version 1.1.1)
Formatter (fmt_s1Ce.bin)
Slave DSP (version 1.1.0 - IDRAM)
Controller (rcf_v1Ce.bin)
Slave DSP (version 1.1.0 - IPRAM)
Router (rtr_v21e.bin)
Slave DSP (version 1.1.0 - xcode)

June 2004

These versions were distributed with Release 3 (and 3.01) of the DAQ. There are no major problems with the code for Macro-Assembly work, though there are several known issues that affect the use of the code in the Test Beam:
These versions are not generally recommended - if you encounter problems we would not be able to help with debugging.

Event Fragment Builder (efb_vx15e.bin)
Master DSP (version 1.0.0)
Formatter (fmt_s1Ae.bin)
Slave DSP (version 1.0.0 - IDRAM)
Controller (rcf_v16e.bin)
Slave DSP (version 1.0.0 - IPRAM)
Router (rtr_v12e.bin)
Slave DSP (version 1.0.0 - xcode)


John Hill Last update 12 January 2005