Internationalization

Support for multiple languages

Doxygen has built-in support for multiple languages. This means that the text fragments that doxygen generates can be produced in languages other than English (the default) at configuration time.

Currently (version 1.2.18), 28 languages are supported (sorted alphabetically): Brazilian Portuguese, Catalan, Chinese, Chinese Traditional, Croatian, Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian.

The table of information related to the supported languages follows. It is sorted by language alphabetically. The Status column was generated from sources and shows approximately the last version when the translator was updated.

Language Maintainer Contact address (remove the NOSPAM.) Status
Brazilian Portuguese Fabio "FJTC" Jun Takada Chino chino@NOSPAM.icmc.sc.usp.br up-to-date
Catalan Albert Mora amora@NOSPAM.iua.upf.es 1.2.17
Chinese Wei Liu
Wang Weihan
liuwei@NOSPAM.asiainfo.com
wangweihan@NOSPAM.capinfo.com.cn
1.2.13
Chinese Traditional Gary Lee garylee@NOSPAM.ecosine.com.tw 1.2.16
Croatian Boris Bralo boris.bralo@NOSPAM.zg.tel.hr up-to-date
Czech Petr Přikryl prikrylp@NOSPAM.skil.cz up-to-date
Danish Erik Søe Sørensen erik@NOSPAM.mail.nu 1.2.7
Dutch Dimitri van Heesch dimitri@NOSPAM.stack.nl up-to-date
English Dimitri van Heesch dimitri@NOSPAM.stack.nl up-to-date
Finnish Olli Korhonen Olli.Korhonen@NOSPAM.ccc.fi obsolete
French Xavier Outhier xouthier@NOSPAM.yahoo.fr 1.2.17
German Jens Seidel
Jens Breitenstein
jensseidel@NOSPAM.users.sf.net
Jens.Breitenstein@NOSPAM.tlc.de
1.2.17
Greek Harry Kalogirou harkal@NOSPAM.rainbow.cs.unipi.gr 1.2.11
Hungarian Földvári György foldvari@NOSPAM.diatronltd.com 1.2.1
Italian Alessandro Falappa
Ahmed Aldo Faisal
alessandro@NOSPAM.falappa.net
aaf23@NOSPAM.cam.ac.uk
up-to-date
Japanese Ryunosuke Sato
Kenji Nagamatsu
puyo@NOSPAM.mint.freemail.ne.jp
naga@NOSPAM.joyful.club.ne.jp
up-to-date
Korean Richard Kim ryk@NOSPAM.dspwiz.com 1.2.13
Norwegian Lars Erik Jordet lej@NOSPAM.circuitry.no 1.2.2
Polish Piotr Kaminski
Grzegorz Kowal
Piotr.Kaminski@NOSPAM.ctm.gdynia.pl
g_kowal@NOSPAM.poczta.onet.pl
1.2.17
Portuguese Rui Godinho Lopes ruiglopes@NOSPAM.yahoo.com up-to-date
Romanian Alexandru Iosup aiosup@NOSPAM.yahoo.com 1.2.16
Russian Alexandr Chelpanov cav@NOSPAM.cryptopro.ru up-to-date
Serbian Dejan Milosavljevic dmilos@NOSPAM.email.com 1.2.17
Slovak Stanislav Kudláč skudlac@NOSPAM.pobox.sk up-to-date
Slovene Matjaz Ostroversnik matjaz.ostroversnik@NOSPAM.zrs-tk.si 1.2.16
Spanish Francisco Oltra Thennet foltra@NOSPAM.puc.cl 1.2.7
Swedish XeT Erixon xet@NOSPAM.hem.passagen.se obsolete
Ukrainian Olexij Tkatchenko olexij.tkatchenko@NOSPAM.gmx.de 1.2.11

Most people on the list have indicated that they were also busy doing other things, so if you want to help to speed things up please let them (or me) know.

If you want to add support for a language that is not yet listed please read the next section.

Adding a new language to doxygen

This short HOWTO explains how to add support for a new language to Doxygen:

Just follow these steps:

  1. Tell me for which language you want to add support. If no one else is already working on support for that language, you will be assigned as the maintainer for the language.
  2. Create a copy of translator_en.h and name it translator_<your_2_letter_country_code>.h I'll use xx in the rest of this document.
  3. Add definition of the symbol for your language into lang_cfg.h:
    #define LANG_xx
    
    Use capital letters for your xx (to be consistent). The lang_cfg.h defines which language translators will be compiled into doxygen executable. It is a kind of configuration file. If you are sure that you do not need some of the languages, you can remove (comment out) definitions of symbols for the languages, or you can say \#undef instead of \#define for them.
  4. Edit language.cpp: Add a
    #ifdef LANG_xx
    #include<translator_xx.h>
    #endif
    
    Remember to use the same symbol LANG_xx that you added to lang_cfg.h. I.e., the xx should be capital letters that identify your language. On the other hand, the xx inside your translator_xx.h should be lower case.

    Now, in setTranslator() add

    #ifdef LANG_xx
        else if (L_EQUAL("your_language_name"))
        {
          theTranslator = new TranslatorYourLanguage;
        }
    #endif    
    
    after the if { ... }. I.e., it must be placed after the code for creating the English translator at the beginning, and before the else { ... } part that creates the translator for the default language (English again).
  5. Edit libdoxygen.pro.in and add translator_xx.h to the HEADERS line.
  6. Edit translator_xx.h:
  7. Run configure and make again from the root of the distribution, in order to regenerated the Makefiles.
  8. Now you can use OUTPUT_LANGUAGE = your_language_name in the config file to generate output in your language.
  9. Send translator_xx.h to me so I can add it to doxygen. Send also your name and e-mail address to be included in the maintainers.txt list.

Maintaining a language

New versions of doxygen may use new translated sentences. In such situation, the Translator class requires implementation of new methods -- its interface changes. Of course, the English sentences need to be translated to the other languages. At least, new methods have to be implemented by the language-related translator class; otherwise, doxygen wouldn't even compile. Waiting until all language maintainers have translated the new sentences and sent the results would not be very practical. The following text describes the usage of translator adapters to solve the problem.

The role of Translator Adapters. Whenever the Translator class interface changes in the new release, the new class TranslatorAdapter_x_y_z is added to the translator_adapter.h file (here x, y, and z are numbers that correspond to the current official version of doxygen). All translators that previously derived from the Translator class now derive from this adapter class.

The TranslatorAdapter_x_y_z class implements the new, required methods. If the new method replaces some similar but obsolete method(s) (e.g. if the number of arguments changed and/or the functionality of the older method was changed or enriched), the TranslatorAdapter_x_y_z class may use the obsolete method to get the result which is as close as possible to the older result in the target language. If it is not possible, the result (the default translation) is obtained using the English translator, which is (by definition) always up-to-date.

For example, when the new trFile() method with parameters (to determine the capitalization of the first letter and the singular/plural form) was introduced to replace the older method trFiles() without arguments, the following code appeared in one of the translator adapter classes:

    /*! This is the default implementation of the obsolete method
     * used in the documentation of a group before the list of
     * links to documented files.  This is possibly localized.
     */
    virtual QCString trFiles()
    { return "Files"; }

    /*! This is the localized implementation of newer equivalent
     * using the obsolete method trFiles().
     */
    virtual QCString trFile(bool first_capital, bool singular)
    {
      if (first_capital && !singular)
        return trFiles();  // possibly localized, obsolete method
      else
        return english.trFile(first_capital, singular);
    }

The trFiles() is not present in the TranslatorEnglish class, because it was removed as obsolete. However, it was used until now and its call was replaced by

    trFile(true, false)

in the doxygen source files. Probably, many language translators implemented the obsolete method, so it perfectly makes sense to use the same language dependent result in those cases. The TranslatorEnglish does not implement the old method. It derives from the abstract Translator class. On the other hand, the old translator for a different language does not implement the new trFile() method. Because of that it is derived from another base class -- TranslatorAdapter_x_y_z. The TranslatorAdapter_x_y_z class have to implement the new, required trFile() method. However, the translator adapter would not be compiled if the trFiles() method was not implemented. This is the reason for implementing the old method in the translator adapter class (using the same code, that was removed from the TranslatorEnglish).

The simplest way would be to pass the arguments to the English translator and to return its result. Instead, the adapter uses the old trFiles() in one special case -- when the new trFile(true, false) is called. This is the mostly used case at the time of introducing the new method -- see above. While this may look too complicated, the technique allows the developers of the core sources to change the Translator interface, while the users may not even notice the change. Of course, when the new trFile() is used with different arguments, the English result is returned and it will be noticed by non English users. Here the maintainer of the language translator should implement at least that one particular method.

What says the base class of a language translator? If the language translator class inherits from any adapter class the maintenance is needed. In such case, the language translator is not considered up-to-date. On the other hand, if the language translator derives directly from the abstract class Translator, the language translator is up-to-date.

The translator adapter classes are chained so that the older translator adapter class uses the one-step-newer translator adapter as the base class. The newer adapter does less adapting work than the older one. The oldest adapter class derives (indirectly) from all of the adapter classes. The name of the adapter class is chosen so that its suffix is derived from the previous official version of doxygen that did not need the adapter. This way, one can say approximately, when the language translator class was last updated -- see details below.

The newest translator adapter derives from the abstract TranslatorAdapterBase class that derives directly from the abstract Translator class. It adds only the private English-translator member for easy implementation of the default translation inside the adapter classes, and it also enforces implementation of one method for noticing the user that the language translation is not up-to-date (because of that some sentences in the generated files may appear in English).

Once the oldest adapter class is not used by any of the language translators, it can be removed from the doxygen project. The maintainers should try to reach the state with the minimal number of translator adapter classes.

To simplify the maintenance of the language translator classes for the supported languages, the translator.pl perl script was developed (located in doxygen/doc directory). It extracts the important information about obsolete and new methods from the source files for each of the languages. The information is stored in the translator report ASCII file (doxygen/doc/translator_report.txt). If you compiled this documentation from sources and if you have also doxygen sources available the link doxygen/doc/translator_report.txt should be valid.

Looking at the base class of the language translator, the script guesses also the status of the translator -- see the last column of the table with languages above. The translator.pl is called automatically when the doxygen documentation is generated. You can also run the script manualy whenever you feel that it can help you. Of course, you are not forced to use the results of the script. You can find the same information by looking at the adapter class and its base classes.

How should I update my language translator? Firstly, you should be the language maintainer, or you should let him/her know about the changes. The following text was written for the language maintainers as the primary audience.

There are several approaches to be taken when updating your language. If you are not extremely busy, you should always chose the most radical one. When the update takes much more time than you expected, you can always decide use some suitable translator adapter to finish the changes later and still make your translator working.

The most radical way of updating the language translator is to make your translator class derive directly from the abstract class Translator and provide translations for the methods that are required to be implemented -- the compiler will tell you if you forgot to implement some of them. If you are in doubt, have a look at the TranslatorEnglish class to recognize the purpose of the implemented method. Looking at the previously used adapter class may help you sometimes, but it can also be misleading because the adapter classes do implement also the obsolete methods (see the previous trFiles() example).

In other words, the up-to-date language translators do not need the TranslatorAdapter_x_y_z classes at all, and you do not need to implement anything else than the methods required by the Translator class (i.e. the pure virtual methods of the Translator -- they end with =0;).

If everything compiles fine, try to run translator.pl, and have a look at the translator report (ASCII file) at the doxygen/doc directory. Even if your translator is marked as up-to-date, there still may be some remarks related to your souce code. Namely, the obsolete methods--that are not used at all--may be listed in the section for your language. Simply, remove their code (and run the translator.pl again).

If you do not have time to finish all the updates you should still start with the most radical approach as described above. You can always change the base class to the translator adapter class that implements all of the not-yet-implemented methods.

If you prefer to update your translator gradually, look at the translator report generated by the translator.pl script and choose one of the missing method that is implemented by the translator adapter, that is used as your base class. When there is not such a method in your translator adapter base class, you probably can change the translator adapter base to the newer one.

Probably the easiest approach of the gradual update is to look at the translator report to the part where the list of the implemented translator adapters is shown. Then:

Notice: Do not blindly implement all methods that are implemented by your translator adapter base class. The reason is that the adapter classes implement also obsolete methods. Another reason is that some of the methods could become obsolete from some newer adapter on. Focus on the methods listed as required.

The really obsolete language translators may lead to too much complicated adapters. Because of that, doxygen developers may decide to derive such translators from the TranslatorEnglish class, which is by definition always up-to-date.

When doing so, all the missing methods will be replaced by the English translation. This means that not-implemented methods will always return the English result. Such translators are marked using word obsolete. You should read it really obsolete. No guess about the last update can be done.

Often, it is possible to construct better result from the obsolete methods. Because of that, the translator adapter classes should be used if possible. On the other hand, implementation of adapters for really obsolete translators brings too much maintenance and run-time overhead.


Generated on Wed Mar 5 09:19:32 2003 for Doxygen manual by doxygen1.2.18