The first public release of
SctRodDaqRelease3.
Known issues with version 3.0
- BOC Scans are still experimental and may not work. In particular they may cause modules to hang requiring a LV power cycle (hard reset should be enough), or at the very least require you to restart the DAQ software.
- Endcap select line doesn't work as the 9th digit of the serial number is not '2' !
- If a module and the module using its redundant link (which is in use) are in different groups then the first one doesn't get reset (BC).
- Noise occupancy test was sending a 0 fC cal pulse which may have been causing anomalous results.